journal article·2006-12

Mechanisms of stress generation within a polysilicon gate for nMOSFET performance enhancement

Pierre Morin, Claude Ortolland, Eric Mastromatteo, Catherine Chaton, Franck Arnaud

Publisher page

Abstract

Local stressors techniques are extensively used in CMOS technologies starting with the 90 nm node to compensate the mobility loss induced by extensive scale down. The purpose is to generate some strain within the silicon channel to enhance carrier mobility. To achieve nMOS performance at the 45 nm node, gate stressors are required in addition to standard nitride liners. With this option, the stress generated within the gate is directly transmitted into the channel and more than 10% gain in saturation current is achievable on nMOS. Stress is generated within the polysilicon gate through annealing under a capping liner. After liner removal, a part of this stress is memorized within the gate material. Final gate stress depends on both polysilicon pre-treatments and liner properties. This paper deals with material studies performed on capping liners in parallel to tests on electrical devices. Important parameters to generate stress under capping are presented. This allows providing a simple model and guidelines for further optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Advancements in Semiconductor Devices and Circuit Design · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Ito · IEDM Tech. Digest · 2000 · 24710.1109/IEDM.2000.904303 ↗
2. Ootsuka · IEDM Tech. Digest · 2000 · 57510.1109/IEDM.2000.904385 ↗
3. Ota · IEDM Tech. Digest · 2002 · 2710.1109/IEDM.2002.1175771 ↗
4. Chen · 2004
5. Boeuf · IEDM Tech. Digest · 2004
6. Lu · IEEE Elec. Dev. Lett. · 2005 · 26
7. Singh · IEEE Elec. Dev. Lett. · 2006 · 2710.1109/LED.2006.870254 ↗
8. Ortolland · 2006
9. Hughey · Thin Solid Films · 2004 · 7 · 460
10. Morin · Mater. Res. Soc. Symp. Proc. · 2005
11. Morin · 2005
12. Kimira · J. Appl. Phys. · 1999 · 86 · 227810.1063/1.371042 ↗
13. Thompson · IEEE Trans. Elec. Dev. · 2004 · 51 · 179010.1109/TED.2004.836648 ↗
14. S.M. Cea, M. Armstrong, C. Auth, T. Ghani, M.D. Giles, T. Hoffmann, R. Kotlyar, P. Matagne, K. Mistry, R. Nagisetty, B. Obradovic, R. Shaheed, L. Shifren, M.Stettler, S. Tyagi, X. Wang, C. Weber, K. Zawadzki, IEDM technical digest (2004).