journal article·2025-04Open access

Effect of diethylenetriamine pentaacetate pentasodium and guanidine phosphate on chemical mechanical polishing of TSV barrier layer

Xuhua Chen, Ru Wang, Zhanjie Du, Yu Zhu, Zhe Liang, Yanwei Dong, Tao Zheng

Abstract

In the process of chemical mechanical polishing (CMP) through silicon via (TSV), the chemical properties of the barrier layer material tantalum are not as active as that of the vertical interconnect material copper (Cu), which improves the material removal rate (MRR) of Ta and allows the rate selection ratio between tantalum (Ta) and Cu to be controlled. In particular, the traditional guanidine complexing agent is used to improve the MRR of Ta under alkaline conditions. The inability to suppress the MRR of excessively fast ethyl orthosilicate deposited silica layers (TEOS-SiO 2 ) is a major challenge in this field. This paper used two complexing agents diethylenetriamine pentaacetate pentasodium (DTPA-5Na) and guanidine phosphate (GP) to solve the above technical problems effectively. Through polishing experiment and electrochemical experiment, it was found that when DTPA-5Na and GP were combined in a ratio of 1:2, the MRR of Ta, Cu, and TEOS-SiO 2 were 1358 Å/min, 590 Å/min, and 1534 Å/min, respectively. The removal rate selection ratio of Ta, Cu, and TEOS-SiO 2 reached 2.3:1:2.6. Subsequently, the complexation mechanism was analyzed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and quantum chemical calculations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Technology review of CNTs TSV in 3D IC and 2.5D packaging: progress and challenges from an electrical viewpoint[J]10.1016/j.mee.2024.112189 ↗
2. Signal integrity analysis of through-silicon via (TSV) with a silicon dioxide well to reduce leakage current for high-bandwidth memory interface[J]10.1109/TCPMT.2023.3276862 ↗
3. Research of vertical via based on silicon, ceramic and glass[J]10.3390/mi14071391 ↗
4. A novel plating bath device for reducing surface copper thickness and improving wafer-scale uniformity[J]10.1088/1361-6439/ad38ca ↗
5. Effect of ammonium citrates as an auxiliary complexing agent in TSV copper film CMP[J]10.1149/2162-8777/ac6d71 ↗
6. Angstrom surface on copper induced by novel green chemical mechanical polishing using ceria and silica composite abrasives[J]10.1016/j.apsusc.2023.158382 ↗
7. Effect of DL-alanine as an auxiliary complexing agent in TSV copper film CMP[J]10.1557/s43578-023-01042-5 ↗
8. CMP slurry and process development for TSV front-side polishing[J]10.1149/1.3694366 ↗
9. The effect of ethylenediamine tetramethylphosphonic acid on the chemical mechanical polishing of TSV barrier layer[J]10.1016/j.colsurfa.2024.133469 ↗
10. Acetic acid and phosphoric acid adding to improve tantalum chemical mechanical polishing in hydrogen peroxide-based slurry[J]10.1016/j.mee.2009.07.009 ↗
11. Role of diethylene triaminepentaacetic acid pentapotassium salt on ruthenium CMP in H2O2-based slurries[J]
12. Chemical-mechanical polishing behavior of tantalum in slurries containing citric acid and alumina[J]10.1016/j.surfcoat.2003.12.025 ↗
13. Electrochemical investigation of the surface-modifying roles of guanidine carbonate in chemical mechanical planarization of tantalum[J]10.1016/j.matchemphys.2011.05.079 ↗
14. Effect of three kinds of guanidinium salt on the properties of a novel low-abrasive alkaline slurry for barrier CMP[J]
15. Nicotinic acid as a novel inhibitor for alkaline cobalt CMP: experiment and molecular simulation[J]10.1016/j.colsurfa.2022.129816 ↗
16. The impact of the combination of xanthan gum and polyvinyl pyrrolidone (PVP) on the chemical mechanical polishing of through silicon via (TSV) barrier layer[J]
17. The role of formamidine acetate as a complexing agent in the chemical mechanical polishing process of Ta-based barrier layers for through-silicon vias wafers[J]
18. Chemical mechanical polishing of tantalum: oxidizer and pH effects[J]10.1023/B:JMSE.0000005381.96813.0f ↗
19. Effect of 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) on Cu/Ta chemical mechanical planarization (CMP) in the barrier layer: a novel complexing agent and the dual role on Cu[J]
20. Urea as a complexing agent for selective removal of Ta and Cu in sodium carbonate based alumina chemical-mechanical planarization slurry[J]10.2298/JSC201220049S ↗
21. Study on the surface interaction mechanism, corrosion inhibition effect and the synergistic action of potassium oleate and fatty alcohol polyoxy ethylene ether on copper film chemical mechanical polishing for giant large scale integrated circuit[J]10.1016/j.tsf.2023.139843 ↗
22. Surface action mechanism and planarization effect of sarcosine as an auxiliary complexing agent in copper film chemical mechanical polishing[J]10.1016/j.apsusc.2020.147109 ↗
23. Effect and mechanism analysis of sarcosine on the chemical mechanical polishing performance of copper film for GLSI[J]10.1016/j.mssp.2022.107003 ↗
24. Inhibition effect and mechanism of 2-mercaptopyrimidine on cobalt-based copper interconnects chemical mechanical polishing: combined experimental and DFT Study[J]10.1149/1945-7111/ad0077 ↗
25. Electrochemical impedance characteristics of Ta/Cu contact regions in polishing slurries used for chemical mechanical planarization of Ta and Cu: considerations of galvanic corrosion[J]10.1016/j.corsci.2005.01.008 ↗
26. Effect of novel pH regulators on copper film chemical mechanical polishing for ruthenium-based copper interconnect under weak alkalinity conditions[J]10.1149/2162-8777/ad4679 ↗
27. Effects of phosphate on pit stabilization and propagation in copper in synthetic potable waters[J]10.5006/0883 ↗
28. Corrosion inhibition performance and mechanism of nitrogen-containing organic compounds on copper in an alkaline slurry[J]10.1016/j.molliq.2024.124207 ↗
29. Electrochemical study of cyproconazole as a novel corrosion inhibitor for copper in acidic solution[J]10.1021/ie402693d ↗
30. Effect of ethylenediamine on CMP performance of ruthenium in H2O2-based slurries[J]10.1039/D1RA08243D ↗
31. Exploring combined effect of nitrilotriacetic acid and inhibitor on copper surface in alkaline solution: Insights from experiments and molecular dynamics simulation studies[J]10.1016/j.molliq.2021.115502 ↗
32. Kinetic study of anodic corrosion of copper in phosphoric acid and effects of some phenols derivatives[J]10.14233/ajchem.2013.15132 ↗
33. Copper electropolishing in the presence of purine derivatives[J]
34. The effect of structural properties of benzo derivative on the inhibition performance for copper corrosion in alkaline medium: experimental and theoretical investigations[J]10.1016/j.colsurfa.2022.129531 ↗
35. Effects of nitrilotriacetic acid and corrosion inhibitor on cobalt barrier chemical–mechanical polishing: experimental and density functional theory analysis[J]10.1016/j.colsurfa.2020.125392 ↗
36. Electrochemical corrosion behavior and theoretical simulation of cobalt in chemical mechanical polishing process[J]10.1016/j.electacta.2023.143184 ↗
37. The flexible coordination modes of guanidine ligands in Zn alkyl and halide complexes: chances for catalysis[J]10.1002/ejic.201000775 ↗