journal article·2024-12

Gradient high-Content SiC/Al composites via innovative filtration-Extrusion

Junfeng Zhao, Zhiyu Yang, Qiulin Li, liang Wang

Publisher page

Abstract

High-content SiC/Al materials have great potential for thermal management applications in electronic devices owing to their excellent thermal performances. This paper introduces a novel approach to prepare gradient high-content SiC/Al composites using filtration-extrusion technology. The results reveal that the extrusion pressure increases with the filtration-extrusion ratio. In the initial stage, SiC particles are squeezed into the die separation holes, but the distribution range is limited. As the extrusion pressure sharply increases, the distribution range of SiC particles in the separation holes significantly expands, leading to a larger deviation between the actual SiC content and the designed content. A lower extrusion temperature, larger separation hole-to-mold area ratio and higher initial SiC content all contribute to a larger discrepancy. This study provides valuable insights into the filtration-extrusion process, offering a foundation for optimizing the production of high-content SiC/Al composites and enhancing their thermal management applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Thermal management materials for high-performance applications10.1002/adem.200300552 ↗
2. Thermal management material: graphite10.1002/adem.201300418 ↗
3. A review of high-temperature electronics technology and applications10.1007/s10854-015-3459-4 ↗
4. Materials for thermal conduction10.1016/S1359-4311(01)00042-4 ↗
5. Thermal conductivity of concrete–a review10.1016/j.jobe.2018.07.002 ↗
6. Modelling functionally graded materials in heat transfer and thermal stress analysis by means of graded finite elements10.1016/j.apm.2017.01.005 ↗
7. Thermal fracture behavior of metal/ceramic functionally graded materials10.1016/S0013-7944(02)00054-1 ↗
8. Thermal fatigue and failure of electronic power device substrates10.1016/j.ijfatigue.2009.03.011 ↗
9. Effect of particle size on the thermal and mechanical properties of aluminum composites reinforced with SiC and diamond10.1016/j.matdes.2015.11.028 ↗
10. Thermal expansion behaviour and dimensional stability of Diamond/Cu composites with different diamond content10.1016/j.jallcom.2019.05.077 ↗
11. Overview of transition metal-based composite materials for supercapacitor electrodes10.1039/D0NA00573H ↗
12. The fabrication of Al–diamond composites for heat dissipation by liquid–solid separation technology10.1007/s10854-016-5582-2 ↗
13. Multiscale stress deconcentration amplifies fatigue resistance of rubber10.1038/s41586-023-06782-2 ↗
14. Microstructure and properties of Al–Si functionally graded materials for electronic packaging10.1016/S1003-6326(23)66356-3 ↗
15. Additive manufacturing of functionally graded materials: a review10.1016/j.msea.2019.138209 ↗
16. Gradient materials: an overview of a novel concept
17. Thermo-elasto-plastic stresses in functionally graded materials subjected to thermal loading taking residual stresses of the fabrication process into consideration10.1016/S1359-8368(00)00049-4 ↗
18. The modelling and design of smart structures using functionally graded materials and piezoelectrical sensor/actuator patches10.1088/0964-1726/12/4/316 ↗
19. The use of functionally graded materials to eliminate or control thermal deformation10.1016/0266-3538(96)00075-9 ↗
20. Reduction of thermal stresses by developing two-dimensional functionally graded materials10.1016/j.ijsolstr.2003.08.017 ↗
21. Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes
22. Comprehensive studies of SS316L/IN718 functionally gradient material fabricated with directed energy deposition: Multi-physics & multi-materials modelling and experimental validation
23. Preparation of W-V functionally gradient material by spark plasma sintering10.1016/j.net.2020.01.008 ↗
24. 18Ni300/Inconel 625 alloy gradient materials fabricated by directed energy deposition
25. Liquid segregation phenomenological behaviors of Ti14 alloy during semisolid deformation10.1155/2014/908781 ↗
26. Rheological behavior of Sn-15 pct Pb in the crystallization range10.1007/BF02642580 ↗
27. Semisolid deformation of aluminium alloy 356 with non-dendritic structure10.1179/026708399101506742 ↗
28. Semi-solid deformation of non-dendritic structures-I Phenomenological Behavior10.1016/S1359-6454(96)00312-6 ↗
29. Adiabatic shear band formation in Al-SiC w composites10.1007/BF02656510 ↗
30. Clogging transition of many-particle systems flowing through bottlenecks10.1038/srep07324 ↗
31. Model for predicting pressure drop and filtration efficiency in fibrous media10.1021/es60016a003 ↗
32. Specific permeability of partially solidified dendritic networks of Al-Si alloys10.1007/BF02643874 ↗