Virtual scale-up of ZnO varistor sintering with a data-driven metamodel and numerical simulation
Source abstract
Abstract
A ZnO varistor functions as a circuit protection device against surge voltage because of its nonlinear current/voltage characteristics. Achieving the desired electrical properties in a ZnO varistor necessitates meticulous control over its microstructure, which is achieved by regulating parameters during the sintering process, such as the sintering temperature, sintering time, heating rate, and cooling rate. In this study, a metamodel was developed through machine learning using a dataset obtained from a laboratory-scale furnace by employing the design of experiment approach and incorporating the aforementioned four process variables and permittivity. A hybrid metaheuristic optimization algorithm was then applied to determine the optimal process conditions, maximizing permittivity through the metamodel. To adapt the derived optimal conditions to a scale-up sintering furnace, temperature data were collected from laboratory-scale and scale-up sintering furnaces through numerical simulation. The permittivity of the sintered ZnO varistor, which was predicted by inputting the corrected process variables into the metamodel, exhibited a 4.6% difference from the experimental value, representing the average permittivity of ZnO varistors sintered in the scale-up furnace. The application of this simulation-based virtual scale-up to ceramic processing can significantly reduce the development time required for scale-up processes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiative Heat Transfer Studies · Solidification and crystal growth phenomena · Engineering Applied Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Zinc oxide varistors10.1109/57.44606 ↗
2. A unique tuning effect of Mg on grain boundaries and grains of ZnO varistor ceramics10.1016/j.jeurceramsoc.2020.12.024 ↗
3. Inversion boundary induced grain growth in ZnO ceramics: from atomic-scale investigations to microstructural engineering10.1088/1742-6596/326/1/012003 ↗
4. Varistors based in the ZnO–Bi2O3 system: Microstructure control and properties10.1016/j.jeurceramsoc.2007.02.046 ↗
5. The characteristics of ZnO–Bi2O3-based varistor ceramics doped with Y2O3 and varying amounts of Sb2O310.1016/S0955-2219(03)00412-6 ↗
6. Development of functional microstructure during sintering of a ZnO varistor material10.1111/j.1151-2916.1993.tb03690.x ↗
7. Sintering and varistor characteristics of ZnO-Bi2O3 ceramics10.1063/1.328266 ↗
8. Doping effects of Ca2+ on the optical and dielectric properties of Ca/ZnO nanopowder materials10.1007/s10854-023-09909-3 ↗
9. Dielectric investigation and effect of low copper doping on optical and morphology properties of ZO-Cu nanoparticles10.1007/s10854-021-06268-9 ↗
10. Microstructure, AC conductivity and complex modulus analysis of Ca-ZnO nanoparticles for potential optoelectronic applications10.1016/j.mseb.2023.116738 ↗
11. Scale-up of fluidized bed processes: principle and practice10.1016/S0032-5910(96)03126-9 ↗
12. Quantifying defects in thin films using machine vision10.1038/s41524-020-00380-w ↗
13. Composition optimization of a high-performance epoxy resin based on molecular dynamics and machine learning10.1016/j.matdes.2020.108932 ↗
14. Optimization of manufacturing processes using ML-assisted hybrid technique10.1016/j.mfglet.2021.10.001 ↗
15. Prediction of thermal properties of zeolites through machine learning10.1021/acs.jpcc.1c09737 ↗
16. PIDOTECH Inc., PIAnO (Process Integration, Automation and Optimization) User’s Manual, Version 2020. (2020).
17. A guideline for parameter setting of an evolutionary algorithm using optimal latin hypercube design and statistical analysis10.1007/s12541-015-0279-7 ↗
18. Optimal Latin-hypercube designs for computer experiments10.1016/0378-3758(94)90115-5 ↗
19. Hybrid Ensemble of classifiers using voting
20. Two-level and hybrid ensembles of decision trees for high performance concrete compressive strength prediction10.1016/j.engappai.2013.03.014 ↗
21. Multilayer Perceptron: Architecture Optimization and Training10.9781/ijimai.2016.415 ↗
22. Manufacturing process modeling and optimization based on multi-layer perceptron network10.1115/1.2830086 ↗
23. The proof and measurement of association between two things10.2307/1412159 ↗
24. Nonparametric independence testing via mutual information10.1093/biomet/asz024 ↗
25. Effect of sintering temperature on zinc oxide varistor ceramics10.1088/1757-899X/440/1/012037 ↗
26. The effect of sintering temperature variations on the development of electrically active interfaces in zinc oxide based varistors10.1016/S0955-2219(00)00223-5 ↗
27. Effects of pre-calcination and sintering temperature on the microstructure and electrical properties of ZnO-based varistor ceramics10.1016/j.mssp.2020.105529 ↗
28. Mitigating the multicollinearity problem and its machine learning approach: a review10.3390/math10081283 ↗
29. A.S.M.J. Hasan, J. Yusuf, R.B. Faruque, Performance Comparison of Machine Learning Methods with Distinct Features to Estimate Battery SOC, in: 2019 IEEE Green Energy and Smart Systems Conference (IGESSC), IEEE, Long Beach, CA, USA, 2019: pp. 1–5. https://doi.org/10.1109/IGESSC47875.2019.9042399.10.1109/IGESSC47875.2019.9042399 ↗
30. Applications for deep learning in ecology10.1111/2041-210X.13256 ↗
31. Deep learning for biology10.1038/d41586-018-02174-z ↗
32. Applications of decision tree and random forest as tree-based machine learning techniques for analyzing the ultimate strain of spliced and non-spliced reinforcement bars10.3390/app12104851 ↗
33. An introduction to decision tree modeling10.1002/cem.873 ↗
34. Advances in the synthesis of ZnO nanomaterials for varistor devices10.1039/c3tc00575e ↗
35. Relationship between microstructure and electrical properties of ZnO-based multilayer varistor10.1143/JJAP.45.5126 ↗
36. A finite element analysis of thermal convection problems with the Joule heat, Japan10.1007/BF03170426 ↗
37. A FEM/BEM for axisymmetric electromagnetic and thermal modelling of induction furnaces10.1002/nme.1952 ↗