Thermal reduction triggered red–orange to blue-violet color-tunable Eu doped bulk transparent nanoporous Al2O3-SiO2 glass for LEDs
Source abstract
Abstract
Nanoporous Al 2O 3-SiO 2 glasses were prepared using a sol–gel method. These sintered nanoporous Al 2O 3-SiO 2 glasses have a transmittance greater than 85 % and possess high mechanical strength, enabling them to contain and protect RE ions. Owing to the presence of nanopores in nanoporous Al 2O 3-SiO 2 glasses, Eu ions can easily enter the nanoporous Al 2O 3-SiO 2 glasses via an ex-situ dipping method. After drying at room temperature (RT) and then heating at 400 °C, 600 °C, 800 °C, and 1200 °C, we obtained a series of Eu doped nanoporous Al 2O 3-SiO 2 glasses. The thermal reduction process from Eu 3+ ions to Eu 2+ ions can occur at a lower sintering temperature (400 °C), enabling a detailed analysis of the thermal reduction mechanism at both low and high temperatures in detail. Under the conditions where Al 3+ ions are present in the samples that are under calcination, Eu 2+-doped nanoporous Al 2O 3-SiO 2 glasses are more easily obtained at relatively low temperatures. Owing to the adjustable composition of Eu 3+/Eu 2+ in the nanoporous Al 2O 3-SiO 2 glasses, tunable emission from red-orange light to blue-violet light can be achieved in the samples. This new type of transparent Eu-doped NPGs has the advantages of high mechanical strength and good processability and is non-toxic and harmless, thereby showing great potential for use in tunable light sources and LED devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Glass properties and applications · Photonic Crystals and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Study of efficient sustainable phosphor in glass (P–i–G) material for white LED applications fabricated by tape casting and screen-printing techniques10.1016/j.mseb.2023.116811 ↗
2. Input-current-ripple-free two-channel LED driver10.1109/TIE.2016.2645499 ↗
3. Emerging Fe3+ doped broad NIR-emitting phosphor Ca2.5Hf2.5(Ga, Al)3O12: Fe3+ for LWUV pumped NIR LED10.1002/lpor.202301200 ↗
4. Realization and optimization of bismuth-activated Ba3Ga2O5Cl2 yellow phosphor for high-quality white LEDs10.1016/j.cej.2024.149723 ↗
5. Polarity-mediated antisolvent control enables efficient lanthanide-based near-infrared perovskite LEDs10.1021/acs.nanolett.3c04586 ↗
6. Development of β-SiAlON: Eu2+ phosphor in glass for high-power LED- and LD-based lighting systems using original BaO-B2O3-ZnO-SiO2 (BBZS) composition glass10.1016/j.jallcom.2019.04.203 ↗
7. Rare earth ion-doped CsPbBr 3 nanocrystals10.1002/adom.201700864 ↗
8. Covalent organic frameworks decorated by rare earth ions10.1016/j.ccr.2023.215577 ↗
9. Narrow-band green-emitting hybrid organic–inorganic Eu(II)-iodides for next-generation micro-LED displays
10. Bandgap tailoring via Si doping in inverse-garnet Mg3Y2Ge3O12: Ce3+ persistent phosphor potentially applicable in AC-LED10.1021/acsami.5b06071 ↗
11. Enhanced thermal stability of red-emitting Sr2Si5N8: Eu2+ phosphors from triggered applicable trap level via rare earth ions Co-doping
12. Improving the up/down-conversion luminescence via cationic substitution and dual-functional temperature sensing properties of Er3+ doped double perovskites10.1016/j.cej.2023.144550 ↗
13. Cyan-Green Phosphor (Lu2M)(Al4Si)O12: Ce+ for High-Quality LED Lamp: Tunable Photoluminescence Properties and Enhanced Thermal Stability10.1021/acs.inorgchem.8b03017 ↗
14. NAP-XPS study of Eu3+ → Eu2+ and Ce4+ → Ce3+ reduction in Au/Ce0.80Eu0.20O2 catalyst10.1016/j.catcom.2019.105875 ↗
15. Tri-chromatic emission from a single-phase Na5Y4(SiO4)(4)F: Eu2+, Tb3+, Eu3+ phosphor for white-light-emitting diodes10.1016/j.jlumin.2018.10.010 ↗
16. Tunable dual-mode photoluminescence from nanocrystalline Eu-doped Li2ZnSiO4 glass ceramic phosphors10.1039/c0jm03273e ↗
17. Broad combined orange-red emissions from Eu2+- and Eu3+-doped low-silica calcium aluminosilicate glass10.1364/OE.20.012658 ↗
18. Synthesis and luminescent characteristics of Ca2−xSrxSiO4: Eu2+ as a potential green-emitting phosphor for near UV-white LED applications10.1016/j.mseb.2010.01.041 ↗
19. Pr3+ ions, another alternative near-infrared luminescence emitter though energy transfer from Eu2+ for NIR pc-LEDs10.1016/j.jallcom.2024.173760 ↗
20. Methods to improve the fluorescence intensity of CaS: Eu2+ red-emitting phosphor for white LED10.1016/j.mseb.2006.03.008 ↗
21. Blue–green color-tunable emissions in novel transparent Sr2LuF7: Eu/Tb glass-ceramics for WLEDs10.3788/COL202018.051601 ↗
22. Combination of broad emission bands of Ti3+, 4+/ Eu2+, 3+ co-doped OH− free low silica calcium aluminosilicate glasses as emitting phosphors for white lighting devices10.1016/j.jallcom.2020.155898 ↗
23. Screen printing of upconversion NaYF4: Yb3+/Eu3+ with Li+ doped for anti-counterfeiting application10.3788/COL202018.110501 ↗
24. Xinqiang Yuan, L.Z. Long Zhang, Blue to red color-tunable Eu-doped AlPO4 mesoporous glass10.3788/COL201412.071602 ↗
25. High quantum yield Gd4.67Si3O13: Eu3+ red-Emitting phosphor for tunable white light-emitting devices driven by UV or blue LED10.1021/acsaelm.1c00012 ↗
26. Blue-green color-tunable emissions in novel transparent Sr2LuF7: Eu/Tb glass-ceramics for WLEDs10.3788/COL202018.051601 ↗
27. The preparation and luminescent properties of AlPO4 mesoporous glass impregnated with Tb3+ ions10.1016/j.jnoncrysol.2015.04.030 ↗
28. Spectral coherence of white LEDs10.1364/PRJ.461314 ↗
29. Realization of a continuous-wave single-frequency tunable Nd: CYA laser10.3788/COL202220.031403 ↗
30. Interface and bulk controlled perovskite nanocrystal growth for high brightness light-emitting diodes10.3788/COL202119.030001 ↗
31. Solidification and simultaneous dual-wavelength emission of rhodamine 6G and voumarin 102 vodoped in AlPO4 mesoporous glass10.1021/jp200596g ↗
32. Spontaneous reduction of Eu3+ ion in Al co-doped sol–gel silica matrix during densification10.1016/S0167-577X(99)00011-7 ↗
33. Sol-gel glass as a matrix for chemical and biochemical sensing, Trac-Trends in Analytical
34. Synthesis of double carbon dots co-doped mesoporous Al2O3 for ratiometric fluorescent determination of oxygen10.1016/j.snb.2017.05.104 ↗
35. Sol–gel preparation of mesoporous Al2O3–SiO2 glasses: structural evolution monitored by solid state NMR10.1007/s10971-014-3309-5 ↗
36. Elaboration and luminescent properties of Eu/Tb Co-doped GdPO4-based glass ceramics for white LEDs10.1111/j.1551-2916.2012.05097.x ↗
37. Breaking latva's rule by energy hopping in a Tb(III): ZnAl2O4 nanospinel10.1021/acs.jpcc.9b08685 ↗
38. Tunable blue–green emission phosphor Ca2PO4Cl: Ce3+, Tb3+: luminescence and energy transfer10.1016/j.optcom.2014.06.037 ↗
39. Structure, luminescence properties and energy transfer of Tb(3+)-Eu(3+) codoped LiBaB9O15 phosphors10.1039/C5DT01849H ↗
40. Energy transfer and tunable luminescent properties in Eu2+/Tb3+/Eu3+ co-doped oxyfluoride aluminosilicate glass10.1016/j.jlumin.2019.116966 ↗
41. Persistent spectral hole burning in Eu3+-doped aluminosilicate glass at high temperature, Journal of The Optical Society of America B-optical
42. Photoluminescence properties and energy transfer in a novel Sr8ZnY(PO4)7: Tb3+, Eu3+ phosphor with high thermal stability and its great potential for application in warm white light emitting diodes10.1039/C8TC06235H ↗
43. Colorless transparent fluorescence material: Sintered porous glass containing rare-earth and transition-metal ions10.1063/1.1946897 ↗
44. Reduction of Eu3+ to Eu2+ in Eu-doped high silica glass prepared in air atmosphere10.1016/j.optmat.2009.10.002 ↗
45. High-brightness red-emitting double-perovskite phosphor Sr2LaTaO6: Eu3+ with high color purity and thermal stability10.3788/COL202119.030003 ↗
46. Energy transfer mechanism of Ce3+-> Tb3+-> Eu3+ in Ba9Y2Si6O2410.1016/j.optmat.2020.109958 ↗
47. Spectral variations of nano-sized Y3Al5O12: Ce phosphors via codoping/substitution and their white LED characteristics10.1016/j.matchemphys.2008.10.019 ↗
48. Optical properties, synthesis, and potential applications of Cu-based ternary or quaternary anisotropic quantum dots, polytypic nanocrystals, and core/shell heterostructures10.3390/nano9010085 ↗