Effect of the heat treatment on the electrical resistivity and magnetization reversal behavior of MnAl alloys
Source abstract
Abstract
Abstract The casting Mn51Al47C2 alloy were undergone two distinct heat treatment processes, consisting of the heat treatment at 1000 and 925 °C. The process followed by quenching and annealing at 500 °C for 15 min. The low electrical resistivity for the heat treatment stage at 1000 °C (165* 10-4 Ω.m) can be described by the small fraction of the L10-ordered τ-phase (40 %). But the high resistivity for heat treatment at 925 °C (290.4* 10-4 Ω.m) originates within the large fraction (>95%) of the L10-ordered τ-phase with space inversion symmetry inhibiting the transport process. The magnetic characterization revealed higher Ms, Mr and Hc along with superior (BH)max for Mn51Al47C2 alloy heat-treated at 925 °C. Additionally, the derivative hysteresis loops assign narrow maxima to Mn51Al47C2 alloy when containing less amount of the L10-ordered τ-phase. Also, tracking the magnetization reversal behavior through the Henkel plots display the increasing negative-peak dominated curve for Mn51Al47C2 alloy when moving from the as homogenized sample (100% τ-phase) to those heat-treated at 1000 (40% L10-ordered τ-phase) and 925 °C (>95% L10-ordered τ-phase), respectively. This highlights the deterioration of the exchange coupling interaction between the grains when dominated with a highly ordered L10-τ-phase. The trend is best confirmed by the quantitative results gained from recoil loops for demagnetization, reversible and irreversible magnetization curves, indicative of a low degree of exchange interactions when the L10-ordered τ-phase is dominant. Furthermore, analyzing the nucleation field through the Kondursky model gives a low value of 0.41 kOe for the alloy in the as homogenized state. This behavior can be attributed to the boosted propagation of the anisotropy field and enhanced magnetic exchange coupling in a structure with dominant regular τ-phase for which the deleterious effects of the interfaces for the L10-ordered τ-phase can be avoided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Saturation magnetization and crystalline anisotropy calculations for MnAl permanent magnet, in
2. Current progress and future challenges in rare-earth-free permanent magnets10.1016/j.actamat.2018.07.049 ↗
3. Anisotropic single-variant of (Mn 54 Al 46) 97 C 310.1016/j.scriptamat.2017.09.008 ↗
4. Structural, microstructural and magnetic evolution in cryo milled carbon doped MnAl10.1038/s41598-018-20606-8 ↗
5. Directly obtained τ-phase MnAl, a high performance magnetic material for permanent magnets10.1016/j.jssc.2016.02.031 ↗
6. Influence of processing on structure property correlations in τ-MnAl rare-earth free permanent magnet material10.1016/j.jallcom.2015.02.041 ↗
7. Exchange coupled rare-earth free Mn-Al/Fe nanocomposite magnets by spark plasma sintering10.1016/j.matlet.2014.09.053 ↗
8. Phase transformation kinetics and microstructural evolution of MnAl permanent magnet alloys10.1016/j.jallcom.2016.06.285 ↗
9. In situ observation of phase transformation in MnAl(C) magnetic materials10.3390/ma10091016 ↗
10. Insights into formation and stability of τ-MnAlZx(Z = C and B)10.1016/j.jallcom.2016.09.047 ↗
11. Structural, electronic and magnetic properties of the Mn 50 Al 46 Ni 4 alloy10.1016/j.jmmm.2015.11.011 ↗
12. Long-lived ultrafast spin precession in manganese alloys films with a large perpendicular magnetic anisotropy10.1103/PhysRevLett.106.117201 ↗
13. Structure and magnetic properties of Cu doped MnAl10.9734/PSIJ/2014/5326 ↗
14. Structural, electronic and magnetic properties of the Mn54−xAl46Tix (x = 2; 4) alloys10.1016/j.intermet.2016.11.012 ↗
15. Stabilization of τ-phase in carbon-doped MnAl magnetic alloys10.1016/j.jallcom.2018.04.318 ↗
16. Neutron diffraction and magnetic investigations of Ga substituted MnAl permanent magnet materials10.1063/1.340140 ↗
17. Neutron diffraction study of hard magnetic alloy MnAlC10.1063/1.333563 ↗
18. Permanent magnetism and microstructure in τ-AlMn(C)10.1016/0304-8853(80)90364-9 ↗
19. Observation of the shear mode of the ε → τ phase transformation in a Mn-Al-C single crystal10.1080/09500830110103225 ↗
20. Rapid quenching and properties of hard magnetic materials in MnAl-X (X=Ti, Cu, Ni, C, B) systems10.1007/BF00544507 ↗
21. Phase analysis and structure of rapidly quenched Al-Mn systems10.1016/j.jallcom.2016.11.171 ↗
22. Magnetic properties of Mn-Al system alloys produced by mechanical alloying10.1063/1.1544526 ↗
23. Grain boundary mediated displacive-diffusional formation of τ-phase MnAl10.1007/s11661-010-0308-1 ↗
24. Exchange anisotropy in the nanostructured MnAl system10.1063/1.3695153 ↗
25. Thermodynamic, structural and magnetic studies of phase transformations in MnAl nanocomposite alloys10.1016/j.matchar.2018.03.034 ↗
26. Rare-earth-free high energy product manganese-based magnetic materials10.1039/C8NR01847B ↗
27. Study on magnetization reversal behavior for annealed Nd2Fe14B/α-Fe nancomposite alloys10.1016/S1002-0721(12)60354-8 ↗
28. Effect of high-energy ball milling on structure and properties of some intermetallic alloys: a mini review10.1007/s13632-019-00550-3 ↗
29. Phase transitions and hard magnetic properties for rapidly solidified MnAl alloys doped with C, B, and rare earth elements10.1007/s10853-011-6049-8 ↗
30. Magnetization reversal behavior in high coercivity Zr doped α-Fe/Nd2Fe14B nanocomposite alloys10.1063/1.3457105 ↗
31. An overview of MnAl permanent magnets with a study on their potential in electrical machines10.3390/en13215549 ↗
32. The effect of the order-disorder transition on the electrical, magnetic and mechanical properties of Vicalloy I10.1016/j.intermet.2017.02.027 ↗
33. Effects of contact placement and sample shape in the measurement of electrical resistivity10.1063/1.1660594 ↗
34. Permanent magnets: plugging the gap10.1016/j.scriptamat.2012.04.036 ↗
35. Electronic structure and magnetic properties of L10 binary alloys10.1103/PhysRevB.90.014402 ↗
36. τ-MnAl with high coercivity and saturation magnetization10.1063/1.4903773 ↗
37. Evolution of intrinsic magnetic properties in L1 0 Mn − Al alloys doped with substitutional atoms and correlated mechanism: experimental and theoretical studies10.1103/PhysRevApplied.11.064008 ↗
38. The role of the interface distribution in the decomposition of metastable L10-Mn54Al4610.1016/j.jallcom.2017.08.197 ↗
39. Metamagnetic behavior in L10-MnAl synthesized by the post annealing of electrodeposited MnAl powder10.1063/1.5079929 ↗
40. Investigations on low energy product of MnAl magnets through recoil curves10.1088/1361-6463/ab7039 ↗
41. Influence of the L21 ordering degree on the magnetic properties of Co2MnSi Heusler films10.1063/1.2931023 ↗
42. Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta–Nb–Mo–Cr–Ti–Al10.1016/j.actamat.2019.07.001 ↗
43. R.E. Hummel, Electronic Properties of Materials, Springer New York, New York, NY, 2011. https://doi.org/10.1007/978-1-4419-8164-6.10.1007/978-1-4419-8164-6 ↗
44. The impact of dislocations on coercivity in L10-MnAl10.1016/j.jallcom.2017.02.028 ↗
45. The electrical resistivity of metals and alloys10.1063/1.2811462 ↗
46. Effect of coulomb correlation on the magnetic properties of Mn clusters10.1021/acs.jpca.8b00540 ↗
47. Domain structure and magnetization processes in MnAl and MnAlC alloys10.1016/0304-8853(83)90770-9 ↗
48. Relation between solidification microstructure and coercivity in MnAl permanent-magnet alloys10.1016/j.intermet.2018.02.011 ↗