journal article·2016-10

Evaluation of alloying effect on the formation of Ni-Fe nanosized powders by pulsed wire discharge

Gyu-Hyeon Park, Gwang-Yeob Lee, Hyeon-Ah Kim, A-Young Lee, Hye-Ryeong Oh, Song-Yi Kim, Do-Hyang Kim, Min-Ha Lee

Publisher page

Abstract

Abstract This study investigates the effects of varying the explosion time and charging voltage of pulsed wire discharge (PWD) on the mean particle size, dispersibility and alloying reliability of powders produced from pure Ni and Ni-plated Fe wires. It was found that with increasing charging voltage, the mean particle size of Ni powders is reduced from 40.11 ± 0.23 to 25.63 ± 0.07 nm, which is attributed to a change in the extent of super heating with particle size. Nanosized powders of Ni-Fe alloy with a mean particle size between 25.91 ± 0.24 and 26.30 ± 0.26 nm were also successfully fabricated and found to consist of particles with a γ-(Ni/Fe) core and FeO shell. The reliability for the optimization of processing parameters to control particle sizes is also evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Energetic Materials and Combustion · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Pulsed wire discharge for nanosize powder synthesis10.1109/27.736045 ↗
2. Synthesis of Fe-N nanosized powders by pulsed wire discharge10.1143/JJAP.44.745 ↗
3. Understanding the mechanism of nano-aluminum particle formation by wire explosion process using optical emission technique10.1016/j.jqsrt.2010.07.011 ↗
4. Generation and characterization of nano-tungsten carbide particles by wire explosion process10.1016/j.jallcom.2010.01.140 ↗
5. Fabrication of Ni, Pt, Pt/Ni nano powders using wire explosion process and characterization10.1016/j.proeng.2011.04.121 ↗
6. Nanostructured materials: an overview and commercial analysis10.1007/s11837-998-0065-4 ↗
7. Nickel/metal hydride secondary batteries using an alkaline solid polymer electrolyte10.1149/1.1391558 ↗
8. Microstructural and crystallographic aspects of thin film recording media10.1109/20.824424 ↗
9. Production of nanometer-sized ain powders by the exploding wire method10.1016/S0965-9773(99)00078-1 ↗
10. Enhancement of nitridation in synthesis of aluminum nitride nanosize powders by pulsed wire discharge10.1143/JJAP.42.1763 ↗
11. Production of ultra-fine powders and their use in high energetic compositions10.1002/prep.200300019 ↗
12. A.P. Lyashko, G.G. Savel’ev, D.V. Tikhonov, Morphology, phase composition and oxidation of powders produced by electric explosion of brass wires, Fizika i Khimiya Obrabotki Materialov, 6 (1992) 127–130.
13. Proc. 1993 Powder Metallurgy World Congress, Kyoto
14. Preparation and characterization of nanocrystalline powders of Cu–Zn alloy by wire electrical explosion method10.1016/S0921-5093(00)01966-3 ↗
15. Characterization of nanocrystalline TiNi powder10.1016/j.scriptamat.2003.10.018 ↗
16. Properties of powders produced by electrical explosions of copper-nickel alloy wires10.1016/j.matlet.2006.11.047 ↗
17. Fabrication of alloy nanopowders by the electrical explosion of electrodeposited wires10.1016/j.matlet.2007.01.106 ↗
18. Magnetic properties of nanosize NiFe2O4 particles synthesized by pulsed wire discharge10.1016/S0040-6090(02)00021-4 ↗
19. Synthesis of nanosize PZT powders by pulsed wire discharge10.1109/TPS.2002.805374 ↗
20. Novel critical temperature resistor of sintered Ni–Fe–O nanosized powders10.1557/JMR.2004.0131 ↗
21. Fabrication of alloy nanopowders by the electrical explosion of electrodeposited wires10.1016/j.matlet.2007.01.106 ↗
22. Electric explosion of wires as a method for preparation of nanopowders10.1023/B:NANO.0000006069.45073.0b ↗
23. Structure, magnetic and microwave properties of FeNi nanoparticles obtained by electric explosion of wire10.1016/j.jallcom.2013.11.164 ↗
24. Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments10.1016/j.actamat.2012.09.064 ↗
25. I. Lerner, Control over formation of high dispersed particles under conditions of electrical explosion of conductors, A thesis for a degree of candidate of technical sciences (Tomsk Polytechnic Institute, 1988).
26. Light scattering in mixtures of BSA, BSA dimers, and fibrinogen under the influence of electric fields10.1016/0021-9797(72)90075-6 ↗
27. Performance of nano-sized Au/TiO2 for selective catalytic reduction of NOx by propene10.1016/j.apcata.2008.06.002 ↗
28. Effect of the Pt–Co interaction upon the SCR of NOx over PtCo mordenite10.1016/S0926-860X(99)00365-8 ↗
29. A kinetic study of the reduction of NOx stored on Pt-Ba/Al2O3 catalyst10.1016/j.apcatb.2010.06.011 ↗
30. Preparation of Cu–Zn/ZnO core-shell nanocomposite by wire electrical explosion and precipitation process in aqueous solution and CO sensing properties10.1016/j.apsusc.2008.10.079 ↗
31. Preparation of Cu–Zn/ZnO core–shell nanocomposite by surface modification and precipitation process in aqueous solution and its photoluminescence properties10.1016/j.materresbull.2006.03.033 ↗
32. Fe45Ni55 Magnetic nanoparticles obtained by electric explosion of wire for the development of functional composites
33. Characteristics of Fe–Ni Nanopowders prepared by electrical explosion of wire in water and ethanol10.4283/JMAG.2011.16.4.435 ↗