journal article·2020-02Open access

Effect of alternative sonochemical treatment on zirconia surface and bond strength with veneering ceramic

Natália Almeida Bastos, Paulo Noronha Lisboa-Filho, Americo Tabata, Paulo Afonso Silveira Francisconi, Adilson Yoshio Furuse, Heitor Marques Honório, Ana Flávia Sanches Borges

Abstract

Abstract The morphological characterization of sonochemical treatment on bond strength of Y-TZP/veneer ceramic was evaluated. The surface topography and roughness were analyzed by Confocal Laser Scanning Microscopy, Atomic Force Microscopy and Scanning Electron Microscopy. The phase transformation was identified through Micro-Raman Spectroscopy. The specimens were subjected to the Shear Bond Strength (SBS) test. Failure modes were classified and examined by Fractographic analysis. No differences were observed between the groups regarding surface roughness. The C (control) and AOX (sandblasting) groups presented the highest median SBS values, which were significantly different from S40 (sonication with 40% nominal power) which showed the lowest median SBS value. All specimens exhibited phase transformation. Most specimens exhibited mixed failures. Although the alternative sonochemical treatment did not lead to sufficient bond strength at Y-TZP/veneer ceramic, it caused less damage to the ceramic surface than sandblasting. Therefore, only liner use seemed to be better than adding the sonochemical treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Impact of prosthetic material on mid- and long-term outcome of dental implants supporting single crowns and fixed partial dentures: a systematic review and meta-analysis
2. Effect of sandblasting on the mechanical properties of Y-TZP zirconia
3. An overview of zirconia ceramics: basic properties and clinical applications10.1016/j.jdent.2007.07.008 ↗
4. The clinical success of all-ceramic restorations10.14219/jada.archive.2008.0361 ↗
5. Clinical efficacy of veneered zirconium dioxide-based posterior partial fixed dental prostheses: five-year results10.1016/S0022-3913(12)60165-6 ↗
6. Characterisation of a new plasma-enhanced film to improve shear bond strength between zirconia and veneering ceramic10.1016/j.msec.2018.06.052 ↗
7. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites10.4012/dmj.27.448 ↗
8. A systematic review of the survival and complication rates of all-ceramic and metal–ceramic reconstructions after an observation period of at least 3 years. Part II: fixed dental prostheses10.1111/j.1600-0501.2007.01468.x ↗
9. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: single crowns (SCs)10.1016/j.dental.2015.02.011 ↗
10. Unstable cracking (chipping) of veneering ceramic on all-ceramic dental crowns and fixed partial dentures10.1016/j.actbio.2008.12.016 ↗
11. Bridging the gap between clinical failure and laboratory fracture strength tests using a fractographic approach10.1016/j.dental.2008.09.001 ↗
12. Influence of veneering fabrication techniques and gas-phase fluorination on bond strength between zirconia and veneering ceramics10.1111/jopr.12451 ↗
13. Influence of sandblasting granulometry and resin cement composition on microtensile bond strength to zircfor dental prosthetic frameworks10.1016/j.jdent.2012.09.013 ↗
14. Effects of different surface treatments on the shear bond strength of veneering ceramic materials to zirconia10.4047/jap.2019.11.1.65 ↗
15. Effect of zirconia surface treatments on the shear bond strength of veneering ceramic10.1016/S0022-3913(11)60060-7 ↗
16. Influence of surface treatment on bond strength of veneering ceramics fused to zirconia10.4012/dmj.2011-163 ↗
17. Effect of surface treatment on bond strength between an indirect composite material and a zirconia framework10.2334/josnusd.54.39 ↗
18. Bond strength of Y-TZP-zirconia ceramics subjected to various surface roughening methods and layering porcelain ceramic10.1002/sia.3209 ↗
19. Shear bond strength between zirconia and veneer ceramic: effect of thermocycling and laser treatment
20. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: zirconia veneering ceramics10.1016/j.dental.2005.03.013 ↗
21. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic10.1016/j.jdent.2004.07.001 ↗
22. Zirconia-TZP and alumina – Advanced technologies for the manufacturing of single crowns
23. Effect of cooling rate on shear bond strength of veneering feldsphatic ceramic to a zirconia ceramic material10.2334/josnusd.52.647 ↗
24. Ceramics for restorative dentistry: critical aspects for fracture and fatigue resistance
25. The influence of surface roughness on feldsphatic ceramic strength10.1016/S0109-5641(00)00030-0 ↗
26. Strength and reliability of surface treated Y-TZP dental ceramics10.1002/1097-4636(2000)53:4<304::AID-JBM4>3.0.CO;2-S ↗
27. Surface phase transformation during grinding of Y-TZP10.1111/j.1551-2916.2007.01739.x ↗
28. Microtensile bond strength of different components of core veneered all-ceramic restorations10.1016/j.dental.2005.03.013 ↗
29. Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina10.1016/S0022-3913(10)60056-X ↗
30. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study
31. Ultrasonic cavitation at solid surfaces10.1002/adma.201004494 ↗
32. Inside a collapsing bubble: sonoluminescence and the conditions during cavitation10.1146/annurev.physchem.59.032607.093739 ↗
33. Cavitation erosion of advanced ceramics in water10.3139/146.101380 ↗
34. Tensile bond strength between tooth-colored feldsphatic ceramic and sandblasted zirconia framework10.1016/j.jpor.2009.02.007 ↗
35. Engineering long term clinical success of advanced ceramic prostheses10.1007/s10856-006-0661-1 ↗
36. Effect of zirconia surface treatment on zirconia/veneer interfacial toughness evaluated by fracture mechanics method10.1016/j.jdent.2014.04.005 ↗
37. Bond strength and Raman analysis of the zirconia-feldspathic ceramic interface10.1016/j.prosdent.2014.02.009 ↗
38. Influence of loading types on the shear strength of the dentin-resin interface bonding10.1023/A:1013848901553 ↗
39. Shear strength of core-veneer interface in bi-layered ceramics10.1016/j.prosdent.2004.02.009 ↗
40. Raman spectroscopic analysis of phase-transformation and stress patterns in zirconia hip joints10.1117/1.1647547 ↗
41. Identification of monoclinic phase in CAD/CAM zirconia FPD frameworks
42. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling10.1016/j.dental.2008.03.028 ↗
43. Compatibility of machined Ce-TZP/Al2O3 nanocomposite and a veneering ceramic10.1016/j.dental.2007.01.005 ↗
44. Veneer Ceramic to Y-TZP Bonding: comparison of different surface treatments10.1111/jopr.12304 ↗
45. Fracture strength and microstructure of Y-TZP zirconia after different surface treatments10.1016/S0022-3913(13)60376-5 ↗
46. Effect of multiple firing and silica deposition on the zirconia-porcelain interfacial bond strength10.1016/j.dental.2012.03.014 ↗
47. Influence of zirconia surface treatment on veneering porcelain shear bond strength after cyclic loading10.1016/j.prosdent.2014.05.029 ↗
48. Effect of surface treatments on the bond strength of veneering ceramic to zirconia
49. Multiscale friction mechanisms and hierarchical surfaces in nano-and bio-tribology10.1016/j.mser.2007.09.001 ↗
50. Anusavice · 2013
51. SEM observations of porcelain Y-TZP interface10.1016/j.dental.2009.01.006 ↗
52. Mecholsky, Fractography: determining the sites of fracture initiation10.1016/0109-5641(95)80045-X ↗
53. Effects of coloring procedures on zirconia/veneer ceramics bond strength10.4047/jap.2014.6.6.451 ↗
54. Effect of surface treatment and liner material on the adhesion between veneering ceramic and zirconia10.1016/j.jmbbm.2014.09.017 ↗
55. Confocal Raman microscopic analysis of the zirconia/feldspathic ceramic interface10.1016/j.dental.2012.02.013 ↗
56. A new modified laser pretreatment for feldsphatic ceramic zirconia bonding10.1016/j.dental.2013.03.002 ↗
57. Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics10.1002/jbm.b.31477 ↗
58. Effect of sandblasting on the long-term performance of dental ceramics10.1002/jbm.b.30097 ↗
59. Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results10.1111/jopr.12066 ↗
60. A randomized controlled clinical trial of 3-unit posterior zirconia–ceramic fixed dental prostheses (FDP) with layered or pressed veneering ceramics: 3-year results10.1016/j.jdent.2015.07.013 ↗