journal article·2008-02

Brazing of Cu with Pd-based metallic glass filler

Takeshi Terajima, Kazuhiro Nakata, Yuji Matsumoto, Wei Zhang, Hisamichi Kimura, Akihisa Inoue

Materials Science and Engineering: B· Volume 148· Issue 1-3
Publisher page

Abstract

Abstract Metallic glass has several unique properties, including high mechanical strength, small solidification shrinkage, small elastic modulus and supercooling state, all of which are well suited as a residual stress buffer for metal and ceramic joining. In the present preliminary study, we demonstrated brazing of Cu rods with Pd 40 Cu 30 Ni 10 P 20 metallic glass filler. The brazing was carried out at 873 K for 1 min in a vacuum atmosphere (1 × 10 −3 Pa), and then the specimens were quenched at the rate of 30 K/s by blowing He. The metallic glass brazing of Cu using Pd 40 Cu 30 Ni 10 P 20 filler was successful, with the exception that several voids remained in the filler. According to micro-focused X-ray diffraction, no diffraction patterns were observed at both the center of the Pd 40 Cu 30 Ni 10 P 20 filler and the Cu/Pd 40 Cu 30 Ni 10 P 20 interface. The result showed that the Cu specimens were joined with Pd 40 Cu 30 Ni 10 P 20 filler in the glassy state. The tensile fracture strength of the brazed specimens ranged from 20 to 250 MPa. The crack extension from the voids in the Pd 40 Cu 30 Ni 10 P 20 filler may have caused the results to be uneven and very low compared to the strength of Pd-based bulk metallic glass.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electrical and Thermal Properties of Materials · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Inoue · Japan. J. Appl. Phys. · 1988 · 27 · L224810.1143/JJAP.27.L2248 ↗
2. Inoue · Mater. Trans. Japan. Inst. Metals · 1990 · 31 · 177
3. Peker · Appl. Phys. Lett. · 1993 · 63 · 234210.1063/1.110520 ↗
4. Inoue · Mater. Trans. Japan. Inst. Metals · 1995 · 36 · 1180
5. Inoue · Mater. Trans. Japan. Inst. Metals · 1997 · 38 · 359
6. Inoue · Mater. Trans. Japan. Inst. Metals · 1996 · 37 · 181
7. Akatsuka · Mater. Trans. Japan. Inst. Metals · 1999 · 40 · 258
8. Nishiyama · Appl. Phys. Lett. · 2002 · 80 · 56810.1063/1.1445475 ↗
9. Kawamura · J. Non-Crystalline Solids · 2003 · 317 · 15210.1016/S0022-3093(02)02005-7 ↗
10. Kawamura · Mater. Sci. Eng. A · 2004 · 375–377 · 11210.1016/j.msea.2003.10.097 ↗
11. Kawamura · Scripta Materia · 2001 · 45 · 12710.1016/S1359-6462(01)01003-X ↗
12. Kawamura · Scripta Materia · 2001 · 45 · 27910.1016/S1359-6462(01)01025-9 ↗
13. Kim · Mater. Sci. Eng. A · 2006 · 434 · 19410.1016/j.msea.2006.06.118 ↗
14. Li · J. Alloys Compounds · 2006 · 413 · 11810.1016/j.jallcom.2005.07.005 ↗
15. Inoue · Mater. Sci. Eng. A · 1997 · 226–228 · 40110.1016/S0921-5093(97)80051-2 ↗
16. Lu · J. Non-Crystalline Solids · 1999 · 250 · 57710.1016/S0022-3093(99)00135-0 ↗
17. Inoue · Acta Materialia · 2000 · 48 · 27910.1016/S1359-6454(99)00300-6 ↗