Study on the influence of different preparation methods on the micro-structure and electrical properties of dense BZY ceramics
Source abstract
Abstract
Barium Zirconate Yttria (BZY) has garnered significant attention in the development of Protonic Ceramic Fuel Cells (PCFCs) due to its high chemical stability and bulk proton conductivity. However, BZY powders synthesized using traditional solid-state methods exhibit a broad particle size distribution and poor sintering activity, limiting their application potential in PCFCs. This study compares the performance differences between Tape Casting&Reactive Sintering(TCRS) and traditional methods in preparing dense BZY ceramics, evaluating the impact on micro-structure and conductivity. Experimental results demonstrate that BZY dense ceramics prepared via TCRS exhibit superior properties, with a conductivity of 2.41 × 10 −3 S·cm −1 at 600 °C, higher than those produced by Dry Pressing&Reactive Sintering(DPRS) and Tape Casting&Sintering(TCS) methods. This technique not only simplifies the preparation process and reduces costs but also enhances conductivity, showing significant potential for scaled-up production. Therefore, TCRS provides an efficient and cost-effective solution for the high-performance preparation of electrolyte materials for PCFCs, advancing the practical application of BZY ceramics in fuel cell technology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Manipulating Nb-doped SrFeO3−δ with excellent performance for proton-conducting solid oxide fuel cells10.26599/JAC.2024.9220880 ↗
2. La0.5-xScxSr0.5MnO3-δ cathodes for proton-conducting solid oxide fuel cells: Taking advantage of the secondary phase10.26599/JAC.2024.9220972 ↗
3. Attempted preparation of La0.5Ba0.5MnO3−δ leading to an in-situ formation of manganate nanocomposites as a cathode for proton-conducting solid oxide fuel cells10.26599/JAC.2023.9220748 ↗
4. A real proton‐conductive, robust, and cobalt‐free cathode for proton‐conducting solid oxide fuel cells with exceptional performance10.1002/sus2.156 ↗
5. Tailoring SrFeO3 cathode with Ta and F allows high performance for proton-conducting solid oxide fuel cells
6. High Total Proton Conductivity in Large-Grained Yttrium-Doped Barium Zirconate10.1021/cm900208w ↗
7. Synthesis by the citrate route and characterisation of BaZrO3, a high tech ceramic oxide: preliminary results10.1016/S1463-0176(99)00016-2 ↗
8. Gelation by acrylamide, a quasi-universal medium for the synthesis of fine oxide powders for electroceramic applications10.1002/(SICI)1521-4095(200005)12:9<649::AID-ADMA649>3.0.CO;2-K ↗
9. Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ thin membrane prepared by in situ tape casting for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2008.12.056 ↗
10. Unveiling the importance of the interface in nanocomposite cathodes for proton‐conducting solid oxide fuel cells
11. Densification and electrical conducting behavior of BaZr0.9Y0.1O3-δ proton conducting ceramics with NiO additive10.1016/j.jallcom.2018.12.090 ↗
12. Influence of CuO and ZnO additions on grain growth and proton conductivity of Y-doped BaZrO310.1007/s41779-019-00347-1 ↗
13. Enhanced Sintering of Yttrium-Doped Barium Zirconate by Addition of ZnO10.1111/j.1551-2916.2005.00449.x ↗
14. ZnO-doped BaZr0.85Y0.15O3−δ proton-conducting electrolytes: Characterization and fabrication of thin films10.1016/j.jpowsour.2009.01.020 ↗
15. BaZr0.8Y0.2O3−δ electrolyte with and without ZnO sintering aid: Preparation and characterization10.1016/j.ssi.2010.07.026 ↗
16. Electrochemical properties and intermediate-temperature fuel cell performance of dense Yttrium-Doped Barium Zirconate with Calcium addition10.1111/j.1551-2916.2011.04795.x ↗
17. Low temperature sintering of Ba(Zr0.8−xCexY0.2)O3−δ using lithium fluoride additive10.1016/j.ssi.2010.06.028 ↗
18. Lowering grain boundary resistance of BaZr0.8Y0.2O3−δ with LiNO3 sintering-aid improves proton conductivity for fuel cell operation10.1039/C0CP01470B ↗
19. Cost-effective solid-state reactive sintering method for high conductivity proton conducting yttrium-doped barium zirconium ceramics10.1016/j.ssi.2010.02.008 ↗
20. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
21. Solid-state reactive sintering mechanism for proton conducting ceramics10.1016/j.ssi.2013.09.025 ↗
22. Multilayer tape casting of large-scale anode-supported thin-film electrolyte solid oxide fuel cells10.1016/j.ijhydene.2019.04.161 ↗
23. High Performing and Durable Anode-Supported Solid Oxide Fuel Cell by Using Tape Casting, Lamination and Co-Firing Method10.1149/09101.0373ecst ↗
24. Development of solid oxide fuel cells (SOFCs) by tape-casting and single-step co-firing of monolithic laminates10.1016/j.ijhydene.2013.11.122 ↗
25. Solid-state reactive sintering mechanism for large-grained yttrium-doped barium zirconate proton conducting ceramics10.1039/c0jm00381f ↗
26. Conductivity study of dense BaCexZr(0.9−x)Y0.1O(3−δ) prepared by solid state reactive sintering at 1500°C10.1016/j.ijhydene.2011.08.118 ↗
27. The influence of grain structures on the electrical conductivity of a BaZr0.95Y0.05O3 proton conductor10.1016/j.ssi.2006.07.008 ↗
28. Structural and Electrochemical Properties of Dense Yttria-Doped Barium Zirconate Prepared by Solid-State Reactive Sintering10.3390/en11113083 ↗
29. Ionic, proton, and oxygen conductivities in the BaZr1−xYxO3−α system (x=0.02−0.15) in humid air10.1134/S1023193510080057 ↗
30. Conductivity studies of dense yttrium-doped BaZrO3 sintered at 1325 °C10.1016/j.jssc.2007.09.027 ↗
31. The effects of NiO addition on the structure and transport properties of proton conducting BaZr0.8Y0.2O3-δ10.1016/j.jallcom.2014.09.207 ↗