The effect of Mo and Sc dopants on the performance of an Sr2Fe2O6 cathode for use in proton-conducting solid oxide fuel cells
Source abstract
Abstract
Sr 2Fe 2O 6 was doped with Sc and Mo ions to investigate the effect of these dopants on the material properties and cathode performance. Both Sc and Mo were doped into Sr 2Fe 2O 6 as pure phases, and the thermal expansion coefficient (TEC) increased with the Sc content of the material. A first-principles calculation at the atomic level indicated that Mo facilitated hydration, whereas Sc doping facilitated the formation of oxygen vacancies. Simulation results showed that the lowest energy barrier to O 2 adsorption and dissociation was obtained by co-doping Sc and Mo into Sr 2Fe 2O 6, facilitating the cathode reaction. The results of fuel cell tests indicated that co-doping with Sc and Mo resulted in higher fuel-cell performance for Sr 2Fe 2O 6 than doping with Sc or Mo alone. An impedance analysis for Sr 2Fe 2O 6 co-doped with Sc and Mo indicated a good balance between hydration and oxygen vacancy formation, as well as a low energy barrier to O 2 adsorption and dissociation, which resulted in this material exhibiting the lowest polarization resistance among the tested cathodes. This study demonstrates that each dopant has unique advantages and disadvantages in terms of cathode properties, and it is necessary to strike a balance among the parameters involved to enhance the cathode performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Bioinspired designs in active metal-based batteries10.1007/s12274-023-6102-3 ↗
2. Zn-ion ultrafluidity via bioinspired ion channel for ultralong lifespan Zn-ion battery10.1093/nsr/nwae199 ↗
3. Three-dimensional macroscopic absorbents: From synergistic effects to advanced multifunctionalities10.1007/s12274-023-6120-1 ↗
4. Recent advances in biodegradable electronics- from fundament to the next-generation multi-functional, medical and environmental device
5. Organic pH Buffer for Dendrite-Free and Shuttle-Free Zn-I Batteries10.1002/anie.202303011 ↗
6. Simple acid etched graphene oxide constructing high-performance sandwich structural hybrid membrane for redox flow battery
7. Environmentally friendly bonded MoS2 solid film lubricants for aerospace applications: Closing the gap
8. Successful preparation of BaCo0.5Fe0.5O3 cathode oxide by rapidly cooling allowing for high-performance proton-conducting solid oxide fuel cells10.26599/JAC.2023.9220707 ↗
9. Materials of solid oxide electrolysis cells for H2O and CO2 electrolysis: A review10.26599/JAC.2023.9220767 ↗
10. The influence of step potentials upon defect equilibria and defect concentrations inside solid oxide fuel cells10.1016/j.mseb.2023.116274 ↗
11. Boosting oxygen reduction activity and CO2 resistance on bismuth ferrite-based perovskite cathode for low-temperature solid oxide fuel cells below 600 °C10.1016/j.jechem.2023.12.004 ↗
12. Considerable oxygen reduction activity and durability of BaO nanoparticles-decorated Ln0.94BaCo2O5 electrocatalysts10.1016/j.seppur.2023.123936 ↗
13. Realizing 6.7 wt% reversible storage of hydrogen at ambient temperature with non-confined ultrafine magnesium hydrides, Energ
14. Perspective and control of cation interdiffusion and interface reactions in solid oxide fuel cells (SOFCs)
15. Size-Dependent Kinetic Enhancement in Hydrogen Absorption and Desorption of the Li-Mg-N-H System10.1021/ja806565t ↗
16. Advanced hydrogen storage alloys for Ni/MH rechargeable batteries10.1039/C0JM01921F ↗
17. A mechanical-force-driven physical vapour deposition approach to fabricating complex hydride nanostructures10.1038/ncomms4519 ↗
18. Entropy engineering design of high-performing lithiated oxide cathodes for proton-conducting solid oxide fuel cells10.26599/JAC.2023.9220804 ↗
19. Exploring how lignin promoting the co-pyrolysis with polylactic acid: Artificial neural network modeling, kinetic analysis and product distribution
20. Thermal-expansion offset for high-performance fuel cell cathodes10.1038/s41586-021-03264-1 ↗
21. Improving Ruddlesden-Popper electrocatalysts through interstitial fluorination-driven rearrangements of local coordination environment
22. Manipulating Nb-doped SrFeO3 with excellent performance for proton-conducting solid oxide fuel cells10.26599/JAC.2024.9220880 ↗
23. A new Sc-doped La0.5Sr0.5MnO3 cathode allows high performance for proton-conducting solid oxide fuel cells
24. A niobium and tantalum co-doped perovskite cathode for solid oxide fuel cells operating below 500 oC10.1038/ncomms13990 ↗
25. A defective iron-based perovskite cathode for high-performance IT-SOFCs: Tailoring the oxygen vacancies using Nb/Ta co-doping10.1016/j.jechem.2023.09.015 ↗
26. La0.5Sr0.5Fe0.9Mo0.1O3-CeO2 anode catalyst for Co-Producing electricity and ethylene from ethane in proton-conducting solid oxide fuel cells10.1016/j.ceramint.2021.05.121 ↗
27. Recent Progress on Advanced Materials for Solid-Oxide Fuel Cells Operating Below 500 oC10.1002/adma.201700132 ↗
28. Mitigating anode/electrolyte interfacial Ni diffusion by a microwave sintering method for proton-conducing solid oxide fuel cells10.1016/j.elecom.2023.107583 ↗
29. Space charge layer effect at the platinum anode/BaZr0.9Y0.1O3 electrolyte interface in proton ceramic fuel cells10.1039/D0TA03339A ↗
30. Densification and electrical conducting behavior of BaZr0.9Y0.1O3 proton conducting ceramics with NiO additive10.1016/j.jallcom.2018.12.090 ↗
31. Triggering interfacial activity of the traditional La0.5Sr0.5MnO3 cathode with Co-doping for proton-conducting solid oxide fuel cells10.1039/D1TA09450E ↗
32. Tailoring Sr2Fe1.5Mo0.5O6 with Sc as a new single-phase cathode for proton-conducting solid oxide fuel cells10.1007/s40843-021-1935-5 ↗
33. Pr2BaNiMnO7 double-layered Ruddlesden-Popper perovskite oxides as efficient cathode electrocatalysts for low temperature proton conducting solid oxide fuel cells10.1039/C9TA11212J ↗
34. Mixed proton-electron-oxide ion triple conducting manganite as an efficient cobalt-free cathode for protonic ceramic fuel cells10.1039/D0TA03899G ↗
35. Tailoring cobalt-free La0.5Sr0.5FeO3 cathode with a nonmetal cation-doping strategy for high-performance proton-conducting solid oxide fuel cells10.1002/sus2.79 ↗
36. Bio-inspired honeycomb-shaped La0.5Sr0.5Fe0.9P0.1O3 as a high-performing cathode for proton-conducting SOFCs, Int J Hydrogen
37. Synergistic dual-phase air electrode enables high and durable performance of reversible proton ceramic electrochemical cells10.1038/s41467-024-44767-5 ↗
38. Self-Assembled Triple-Conducting Nanocomposite as a Superior Protonic Ceramic Fuel Cell Cathode10.1016/j.joule.2019.07.004 ↗
39. An In Situ Formed, Dual-Phase Cathode with a Highly Active Catalyst Coating for Protonic Ceramic Fuel Cells10.1002/adfm.201704907 ↗
40. Tailoring electronic structure of perovskite cathode for proton-conducting solid oxide fuel cells with high performance10.1016/j.jpowsour.2021.229486 ↗
41. Controllable CO2 conversion in high performance proton conducting solid oxide electrolysis cells and the possible mechanisms10.1039/C8TA12458B ↗
42. Sr and Fe co-doped Ba2In2O5 as a new proton-conductor-derived cathode for proton-conducting solid oxide fuel cells10.1016/j.jeurceramsoc.2023.03.035 ↗
43. Tailoring the Oxygen Vacancy to Achieve Fast Intrinsic Proton Transport in a Perovskite Cathode for Protonic Ceramic Fuel Cells10.1021/acsaem.0c00486 ↗
44. Effect of Cl doping on the electrochemical performance of Sr2Fe1.5Mo0.5O6 cathode material for solid oxide fuel cells10.1016/j.ceramint.2020.06.046 ↗
45. Cu-Doped Sr2Fe1.5Mo0.5O6 as a highly active cathode for solid oxide electrolytic cells10.1039/C9CC03455B ↗
46. In-situ exsolution of nanoparticles from Ni substituted Sr2Fe1.5Mo0.5O6 perovskite oxides with different Ni doping contents10.1016/j.electacta.2020.136351 ↗
47. Electrochemical performance and anode reaction process for Ca doped Sr2Fe1.5Mo0.5O6 as electrodes for symmetrical solid oxide fuel cells10.1016/j.electacta.2020.136067 ↗
48. Nb-doped Sr2Fe1.5Mo0.5O6 electrode with enhanced stability and electrochemical performance for symmetrical solid oxide fuel cells10.1016/j.ceramint.2019.03.130 ↗
49. Electrochemical performance and effect of moisture on Ba0.5Sr0.5Sc0.175Nb0.025Co0.8O3 oxide as a promising electrode for proton-conducting solid oxide fuel cells, Appl
50. Cathode reaction models and performance analysis of Sm0.5Sr0.5CoO3-BaCe0.8Sm0.2O3 composite cathode for solid oxide fuel cells with proton conducting electrolyte10.1016/j.jpowsour.2009.04.053 ↗
51. First-principles study of O2 reduction on BaZr1-xCoxO3 cathodes in protonic-solid oxide fuel cells10.1039/C4TA01652A ↗
52. Computational design of cobalt-free mixed proton-electron conductors for solid oxide electrochemical cells10.1039/C7TA00338B ↗
53. Highly-conductive proton-conducting electrolyte membranes with a low sintering temperature for solid oxide fuel cells10.1016/j.memsci.2018.04.037 ↗
54. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
55. Gluing Ba0.5Sr0.5Co0.8Fe0.2O3 with Co3O4 as a cathode for proton-conducting solid oxide fuel cells10.1007/s40843-022-2240-y ↗
56. Attempted preparation of La0.5Ba0.5MnO3 leading to an in-situ formation of manganate nanocomposites as a cathode for proton-conducting solid oxide fuel cells10.26599/JAC.2023.9220748 ↗
57. Superior Durability and Activity of a Benchmark Triple-Conducting Cathode by Tuning Thermo-Mechanical Compatibility for Protonic Ceramic Fuel Cells10.1002/adfm.202309698 ↗
58. Unveiling the importance of the interface in nanocomposite cathodes for proton-conducting solid oxide fuel cells10.1002/EXP.20230082 ↗
59. The role of oxygen vacancies of ABO3 perovskite oxides in the oxygen reduction reaction, Energ
60. Surface oxygen vacancies promoted photodegradation of benzene on TiO2 film10.1016/j.apsusc.2020.145597 ↗
61. Diagnosis on improved electrocatalytic activity of La2Ni0.8Cu0.2O4 electrodes towards oxygen reduction reaction10.1016/j.apsusc.2017.06.238 ↗
62. Improving the sinterability of CeO2 by using plane-selective nanocubes10.1016/j.jeurceramsoc.2019.06.024 ↗
63. Hydration, oxidation, and reduction of GdBaCo2O5.5 from first-principles10.1039/C5TA05388A ↗
64. A real proton-conductive, robust, and cobalt-free cathode for proton-conducting solid oxide fuel cells with exceptional performance10.1002/sus2.156 ↗
65. Tailoring a LaMnO3 cathode for proton-conducting solid oxide fuel cells: integration of high performance and excellent stability10.1039/D1TA01221E ↗