journal article·2024-12

Augmenting the electrochemical capability of TMDCs thin film electrodes via interface engineering for energy storage applications

Muhammad Zahir Iqbal, Asma Khizar, Sajid Khan, H.H. Hegazy, A.A. Alahmari

Publisher page

Abstract

Low power density and low energy density associated with traditional devices, such as batteries, and supercapacitors led to the development of hybrid supercapacitors (HSCs). Researchers explore various classes of materials to cope with these limitations. Among them, transition metal dichalcogenides (TMDCs), due to their layered structure, are widely analyzed. Here the sputtering route was adopted to deposit a uniform interfacial layer of zirconium nitride (ZrN) 100 nm, which plays a crucial role in modulating the electrochemical properties of the top sputtered tungsten disulfide (WS 2) layer of 250 nm. The electrochemical measurements resulted the specific capacitance of 858F/g for WS2 and 2036F/g for WS 2/ZrN at scan rate of 3 mV/s. Hybrid device WS 2/ZrN//AC exhibited an energy density of 76 Wh/kg, and a power density of 4325 W/kg. In addition to this, a semiempirical approach is adopted to deconvolute capacitive and diffusive contributions. This hybrid structure can improve charge storage capacity, stability, and cycle life, making it a promising material for next-generation energy storage solutions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Transition Metal Oxide Nanomaterials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Dendrite-free zinc deposition induced by multifunctional CNT frameworks for stable flexible Zn-ion batteries10.1002/adma.201903675 ↗
2. Single-step fabrication of di-titanium nitride thin-film flexible and biocompatible supercapacitor10.1016/j.ceramint.2022.08.055 ↗
3. Metal nitride composite based nanostructured sheet-electrodes alternately stacked in asymmetric configuration towards robust flexible supercapacitor
4. Graphene encapsulated iron nitrides confined in 3D carbon nanosheet frameworks for high-rate lithium ion batteries10.1016/j.carbon.2019.12.041 ↗
5. Recent trends in electrolytes for supercapacitors
6. Hydrogel-derived nitrogen-doped porous carbon framework with vanadium nitride decoration for supercapacitors with superior cycling performance10.1016/j.jmst.2023.01.031 ↗
7. Effect of surface area on electrical properties of NiCo2O4-reduced graphene oxide nanocomposites for supercapacitor electrodes applications
8. Carbon materials for high volumetric performance supercapacitors: Design, progress, challenges and opportunities10.1039/C5EE03109E ↗
9. Recent advances and challenges in divalent and multivalent metal electrodes for metal–air batteries10.1039/C9TA05094A ↗
10. Tungsten oxide nanofibers self-assembled mesoscopic microspheres as high-performance electrodes for supercapacitor10.1016/j.electacta.2015.06.044 ↗
11. Flexible electrode materials based on WO3 nanotube bundles for high performance energy storage devices10.1016/j.nanoen.2017.10.058 ↗
12. Synergistically modified WS2@PANI binary nanocomposite-based all-solid-state symmetric supercapacitor with high energy density10.1039/D2NJ00165A ↗
13. Solvothermal synthesis of metallic 1T-WS2: a supporting co-catalyst on carbon nitride nanosheets toward photocatalytic hydrogen evolution10.1016/j.cej.2017.10.125 ↗
14. 2H→ 1T phase change in direct synthesis of WS2 nanosheets via solution-based electrochemical exfoliation and their catalytic properties10.1021/acsami.7b06898 ↗
15. Singh, A., S.N. Shirodkar, and U.V. Waghmare, 1H and 1T polymorphs, structural transitions and anomalous properties of (Mo, W)(S, Se) 2 monolayers: first-principles analysis. 2D Materials, 202(3): p. 035013.10.1088/2053-1583/2/3/035013 ↗
16. Controlled synthesis and transfer of large-area WS2 sheets: from single layer to few layers10.1021/nn400971k ↗
17. Field-effect transistors based on WS2 nanotubes with high current-carrying capacity10.1021/nl401675k ↗
18. Synthesis and chemistry of elemental 2D materials10.1038/s41570-016-0014 ↗
19. Enhanced lithium storage performance of liquid-phase exfoliated graphene supported WS2 heterojunctions10.1002/celc.201800926 ↗
20. Engaging tailored capacity of layered WS2 via sulphur bonding coupled with polyetherimide (WS2@ NC) nanocomposite for high power and improved lithium-ion storage10.1016/j.matchemphys.2020.122832 ↗
21. Improving the anode performance of WS2 through a self-assembled double carbon coating10.1021/acs.jpcc.5b03540 ↗
22. Nanointerface chemistry: Lattice-mismatch-directed synthesis and application of hybrid nanocrystals10.1021/acs.chemrev.9b00443 ↗
23. Exploring vacuum-assisted thin films toward supercapacitor applications: Present status and future prospects10.1021/acsomega.3c05285 ↗
24. Zinc ferrite anchored multiwalled carbon nanotubes for high-performance supercapacitor applications10.1002/ejic.201700836 ↗
25. Facile SILAR processed Bi2S3: pbS solid solution on MWCNTs for high-performance electrochemical supercapacitor10.1002/cjoc.201900222 ↗
26. Anchoring cobalt oxide nanoparticles on to the surface multiwalled carbon nanotubes for improved supercapacitive performances10.1039/C5RA06377A ↗
27. Gul, H., A.-u.-H.A. Shah, and S. Bilal, Achieving ultrahigh cycling stability and extended potential window for supercapacitors through asymmetric combination of conductive polymer nanocomposite and activated carbon. Polymers, 2019. 11(10): p. 1678.10.3390/polym11101678 ↗
28. Structural, impedance, and EDLC characteristics of proton conducting chitosan-based polymer blend electrolytes with high electrochemical stability10.3390/molecules24193508 ↗
29. Role of aqueous electrolytes on the performance of electrochemical energy storage device10.1016/j.jelechem.2019.113793 ↗
30. Two-dimensional hexagonal SnSe nanosheets as binder-free electrode material for high-performance supercapacitors10.1109/TPEL.2020.2989097 ↗
31. Solution processed nanostructured cerium oxide electrode: Electrochemical engineering towards solid-state symmetric supercapacitor device10.1016/j.jelechem.2019.02.047 ↗
32. Vanadium oxide anchored MWCNTs nanostructure for superior symmetric electrochemical supercapacitors10.1016/j.matdes.2019.107972 ↗
33. Method comparison for deconvoluting capacitive and pseudo-capacitive contributions to electrochemical capacitor electrode behavior10.1149/2.0931803jes ↗
34. Capacitive and diffusive contributions in supercapacitors and batteries: A critique of b-value and the ν–ν1/2 model10.1002/smll.202305059 ↗
35. Sputter deposited chromium nitride thin electrodes for supercapacitor applications10.1016/j.matlet.2018.02.094 ↗
36. Dry synthesis of binder-free ruthenium nitride-coated carbon nanotubes as a flexible supercapacitor electrode10.1021/acsami.1c22276 ↗
37. Nanocasting synthesis of an iron nitride-ordered mesopore carbon composite as a novel electrode material for supercapacitors10.1039/C7RA08704G ↗
38. Surface nitrided and carbon coated TiNb2O7 anode material with excellent performance for lithium-ion batteries10.1016/j.jallcom.2020.155241 ↗
39. Xavier, J.R. and R.B. J, Evaluation of reduced graphene oxide/WO3/WS2 hybrids for high performance supercapacitor electrode. Journal of Alloys and Compounds, 2023. 947: p. 169483.10.1016/j.jallcom.2023.169483 ↗
40. Influence of electrode mass-loading on the properties of spray deposited Mn3O4 thin films for electrochemical supercapacitors10.1016/j.tsf.2016.04.023 ↗
41. LiNi0.5Mn1.5O4 Thin films grown by magnetron sputtering under inert gas flow mixtures as high-voltage cathode materials for lithium-ion batteries10.1002/celc.202201004 ↗
42. Binder-free TiN/graphite based thin film negative electrode for flexible energy storage devices10.1016/j.vacuum.2023.111848 ↗
43. Reactive sputtering of vanadium nitride thin films as pseudo-capacitor electrodes for high areal capacitance and cyclic stability10.1007/s10854-018-9435-z ↗
44. Ray, S.K., et al., Cavity-like hierarchical architecture of WS2/α-NiMoO4 electrodes for supercapacitor application. Ceramics International, 2020. 46(11, Part B): p. 19022-19027.10.1016/j.ceramint.2020.04.232 ↗
45. Synergy of VN and Fe2O3 enables high performance anodes for asymmetric supercapacitors10.1021/acsami.2c22848 ↗
46. Integrated biomonitoring sensing with wearable asymmetric supercapacitors based on Ti3C2 MXene and 1T-phase WS2 nanosheets10.1002/adfm.202003673 ↗
47. Robust flexible WS2/PEDOT:PSS film for use in high-performance miniature supercapacitors10.1016/j.jelechem.2018.07.040 ↗
48. Hierarchical architecture of coupling graphene and 2D WS2 for high-performance supercapacitor10.1016/j.electacta.2018.12.096 ↗
49. Boron nitride/Ti3C2Tx MXene nanosheet/WS2 nanostructure ternary composites for all-solid-state flexible asymmetric supercapacitors10.1021/acsanm.3c01202 ↗
50. Influence of chromium content on microstructural and electrochemical supercapacitive properties of vanadium nitride thin films developed by reactive magnetron co-sputtering process10.1016/j.ceramint.2019.02.170 ↗
51. All nitride asymmetric supercapacitors of niobium titanium nitride-vanadium nitride10.1016/j.jpowsour.2020.228842 ↗
52. Freestanding Co3N thin film for high performance supercapacitors10.1016/j.ceramint.2020.09.166 ↗
53. Tailoring surface chemistry and morphology of titanium nitride electrode for on-chip supercapacitors10.1021/acssuschemeng.0c00977 ↗
54. Porous CrN thin films by selectively etching CrCuN for symmetric supercapacitors10.1016/j.jpowsour.2018.03.023 ↗
55. Aqueous asymmetric supercapacitor based on RuO2-WO3 electrodes10.1016/j.electacta.2019.134879 ↗
56. Three-dimensional hierarchical porous lignin-derived carbon/WO3 for high-performance solid-state planar micro-supercapacitor10.1016/j.ijbiomac.2021.08.183 ↗