journal article·2024-11

A low-pollution surface modification system for improving the adhesion of polycarbonate

Xinwei Li, Wenxia Zhao, Wei Zhao, Yifan Song, Huaijun Chen, Xin Liu, Dongping Li, Jiaxin Li

Publisher page

Abstract

In the present study, the surface adhesion capacity of polycarbonate (PC) has been improved by using a low-pollution surface modification system that includes alkaline potassium ferrate (K 2FeO 4). The effects of environmentally friendly swelling conditions, NaOH and K 2FeO 4 contents, and other modification conditions on the PC surface topography, hydrophilicity, and surface roughness were then primarily studied. The modification resulted in an improvement of the hydrophilic property of the PC surface. There was a significant reduction in the surface contact angle from 97.6° to 34.1°. A considerable increase in the PC surface’s average surface roughness ( Ra) was also observed, which increased from 2 nm to 209 nm. Meanwhile, after chemical copper plating, the maximum peel strength between the PC resin and copper layer reached 1.13 kN/m. Furthermore, infrared absorption spectroscopy (FT–IR) and X–ray photoelectron spectroscopy (XPS) was used in the analyses of the surface chemical structure of the PC substrate, both prior to and after surface treatments. The results indicated that the modification of the surface led to increased hydrophilic groups on the PC surface, which was advantageous for the subsequent PC treatments (involving chemical copper plating). In short, the PC surface modification increased surface roughness and surface hydrophilicity, which improved the bonding between the chemically plated copper layer and the PC substrate.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Polymer crystallization and properties · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Tensile Properties of ultrathin Bisphenol-A polycarbonate films10.1021/acs.macromol.9b00835 ↗
2. Fully Recyclable polycarbonates from simple, bio-derived building blocks10.1021/acsapm.0c01028 ↗
3. Corona Discharge-induced functional surfaces of polycarbonate and cyclic olefins substrates10.1016/j.surfcoat.2019.01.073 ↗
4. A comparative study of the structural, optical and morphological properties of different types of Makrofol polycarbonate10.1007/s00289-021-04011-2 ↗
5. Synergistic coating strategy combining photodynamic and photothermal properties along with reinforcing corrosion protection fabricated on magnesium alloys
6. Mechanically robust anti-fingerprint coating on polycarbonate substrate10.1016/j.apsusc.2022.153706 ↗
7. Ultrastable and durable silicone coating on polycarbonate surface realized by nanoscale interfacial engineering10.1021/acsami.9b22877 ↗
8. Preparation and evaluation of high-transparent scratch-resistant thin films on plasma treated polycarbonate substrate10.1016/j.arabjc.2023.104667 ↗
9. Laccase driven biocatalytic oxidation to reduce polymeric surface hydrophobicity: An effective pre-treatment strategy to enhance biofilm mediated degradation of polyethylene and polycarbonate plastics10.1016/j.scitotenv.2023.166721 ↗
10. Scanning electrochemical microscopy and electrochemical impedance spectroscopy-based characterization of perforated polycarbonate membrane modified by carbon-nanomaterials and glucose oxidase10.1016/j.colsurfa.2021.126822 ↗
11. Polycarbonate surface modification via Aqueous SI-PET-RAFT10.1021/acs.macromol.2c00714 ↗
12. Hydrophilic modification of polycarbonate using p-phenylenediamine10.1080/25740881.2023.2233169 ↗
13. Hydrophilic modification of polycarbonate surface with surface alkoxylation pretreatment for efficient separation of polycarbonate and polystyrene by froth flotation10.1016/j.wasman.2020.09.006 ↗
14. Surface modification of polycarbonate urethane by grafting polyethylene glycol and bivalirudin drug for improving hemocompatibility10.1002/pat.5903 ↗
15. The effects of multicharged ion irradiation on a polycarbonate surface10.1080/10420150.2018.1552958 ↗
16. Surface plasma treatment (Ar/CF4) decreases biofouling on polycarbonate surfaces10.1680/jsuin.20.00026 ↗
17. Preparation and evaluation of high-transparent scratch-resistant thin films on plasma treated polycarbonate substrate10.1016/j.arabjc.2023.104667 ↗
18. Low-pressure plasma treated polycarbonate and polymethyl methacrylate (PMMA) sheets with different surface patterns to change their surface properties
19. Surface Modification of polycarbonate by an atmospheric pressure argon microwave plasma sheet10.3390/ma12152418 ↗
20. Plasma etching of polycarbonate surfaces for improved adhesion of Cr coatings10.1016/j.apsusc.2023.157903 ↗
21. UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process10.3139/217.3509 ↗
22. The effect of gamma-ray irradiation on polycarbonate sheets10.1016/j.radphyschem.2022.110100 ↗
23. Superhydrophobic-antibacterial polycarbonate fabrication using excimer laser treatment10.1016/j.ijleo.2022.169377 ↗
24. Femtosecond laser pulse inducing hydrophilicty and hydrophobicity on polycarbonate surfaces10.2351/1.5096074 ↗
25. Investigation on polycarbonate surface wetting property with femtosecond laser irradiation and ultrasonic treatment10.1016/j.optlastec.2019.02.032 ↗
26. Acid- and base-catalyzed hydrolyses of aliphatic polycarbonates and polyesters10.1016/j.cattod.2006.02.060 ↗
27. Swelling-Activated, Soft Mechanochemistry in polymer materials10.1021/acs.langmuir.2c02801 ↗
28. Organic solvent assisted laser processing of transparent polymer films based on the swelling and penetration behavior10.1016/j.optlastec.2022.107937 ↗
29. Fighting corrosion with stimuli-responsive polymer conjugates10.1039/D0CC03061A ↗
30. Surface modification of epoxy resin by MnO2–H2SO4–H2O–Na4P2O7 for enhanced adhesion to electroless copper10.1016/j.ijadhadh.2023.103611 ↗
31. Study of surface etching of polycarbonate by environmentally friendly alkaline potassium permanganate system10.1016/j.mseb.2023.116876 ↗
32. Solvent-Induced Pathway Complexity of Supramolecular polymerization unveiled using the hansen solubility parameters10.1021/jacs.3c05547 ↗
33. A study of the environmentally friendly polycarbonate surface etching system containing H2SO4–MnO2 colloid10.1080/01694243.2012.745052 ↗
34. Selective flotation separation of polycarbonate from plastic mixtures based on Fenton treatment combined with ultrasonic10.1007/s10163-022-01367-z ↗
35. Surface treatment with Fenton for separation of acrylonitrile-butadiene-styrene and polyvinylchloride waste plastics by flotation10.1016/j.wasman.2017.05.009 ↗
36. Application of froth flotation in the separation of polyvinyl chloride and polycarbonate for recycling of waste plastic based on a novel surface modification10.1016/j.wasman.2020.05.009 ↗
37. X-ray photoelectron spectroscopy: Towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
38. Effects of polycarbonate crystals, π-π interactions, and chemical bonds at an interface on the interfacial adhesion between polycarbonate and reinforcing fibers
39. Novel succinimide-based ionic liquids as efficient and sustainable media for methanolysis of polycarbonate to recover bisphenol A (BPA) under mild conditions10.1016/j.polymdegradstab.2019.108996 ↗
40. In Vivo Degradation mechanisms of aliphatic polycarbonates and functionalized aliphatic polycarbonates10.1002/mabi.202100085 ↗
41. Photodegradation of bisphenol A polycarbonate10.1016/j.polymdegradstab.2006.12.003 ↗