Tailoring the luminescent and structural behaviors of pH-driven PPy/gC3N4/ZrO2 nanocomposite as an emissive layer material for OLED application
Source abstract
Abstract
The polymeric nanocomposites were synthesized via an in-situ polymerization method, optimized through pH adjustment of zirconium oxide rather than concentration variation. X-ray powder diffraction analysis revealed phase transitions and average crystallite sizes ranging from approximately 6.52–9.16 nm, depending on the pH levels. Field Emission Scanning Electron Microscopy tool is used to analyze the granular nanosheets and nanoparticles like the microstructure of polypyrrole, graphitic carbon nitride and zirconium oxide at a high resolution. UV–visible spectroscopy determined an optical bandgap energy of about 2.44 eV, a refractive index of 2.17, and an optical conductivity of 3.15 × 10 10 S/cm 2. Forster resonance energy transfer between Zirconium dioxide and graphitic carbon nitride significantly enhanced photoluminescence emission. PL emission and color purity (45 %) of the optimized sample were examined using photoluminescence data. Electrical conductivity of ∼15.9 × 10 −4 S/cm and dielectric constant of ∼14.77 were obtained from I to V and LCR meter measurements. These properties indicate that the pH-driven nanocomposite exhibits optimized electron-hole recombination rates, electrical conductivity, and suitable bandgap energy, making its potential impact as an emissive layer material for OLED applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Organic electroluminescent diodes10.1063/1.98799 ↗
2. Improvement of electroluminescence performance of organic light-emitting diodes with a liquid-emitting layer by the introduction of electrolyte and a hole-blocking layer10.1002/adma.201003505 ↗
3. Recent advances in efficient emissive materials-based OLED applications: a review10.1007/s10853-021-06503-y ↗
4. The application of charge transfer host-based exciplex and thermally activated delayed fluorescence materials in organic light-emitting diodes10.1016/j.orgel.2018.12.039 ↗
5. Save energy on OLED lighting by a simple yet powerful technique10.1039/C4RA10434J ↗
6. Low-temperature atomic layer deposition of Al2O3/alucone nanolaminates for OLED encapsulation10.1039/C9RA02111F ↗
7. J. Singh, Organic Light Emitting Devices, 2012. https://doi.org/10.5772/2589.10.5772/2589 ↗
8. Tailoring the properties of 2-D rGO-PPy-ZnS nanocomposite as an emissive layer for OLEDs
9. Investigation of structural, optical and thermal properties of TiO2 reinforced g-C3N4 nanocomposite for emissive layer application
10. Mixed morphology, inflated e − - h + recombination rate and augmented optical absorbance capacity of PANI/PPY/CdS nanocomposite as electron transport layer for OLED application10.1007/s10904-018-1015-4 ↗
11. Composition and excitation wavelength dependent photoluminescence color tuning in the nanocomposite of PMMA and ZnO nanorods for PLED10.1016/j.jallcom.2021.160450 ↗
12. FRET mechanism to enhance the quantum yield of the PCz/gC3N4 nanocomposite, an emissive material for OLED applications10.1039/D3CP02637J ↗
13. Exceptional class of thermally activated delayed fluorescent emitters that display pure blue, near-IR, circularly polarized luminescence, and multifunctional behavior for highly efficient and stable OLEDs10.1039/D1TC05906H ↗
14. Enhancement of Structural and Optical Properties of CMC/PAA Blend by Addition of Zirconium Carbide Nanoparticles for Optics and Photonics Applications, East Eur
15. Structural and optical properties of (biopolymer blend-metal oxide) bionanocomposites for humidity sensors10.1166/jbns.2018.1578 ↗
16. Hashim, Ahmed, Alaa J. Kadham Algidsawi, Hind Ahmed, Aseel Hadi, and Majeed Ali Habeeb. “Structural, dielectric, and optical properties for (PVA/PVP/CuO) nanocomposites for pressure sensors.” Nanosistemi, Nanomateriali, Nanotehnologii 19, no. 1 (2021): 91-102. 19 (2021). https://doi.org/10.15407/nnn.19.01.091.10.15407/nnn.19.01.091 ↗
17. rGO–Y 2 O 3 intercalated PANI matrix (PANI–rGO–Y 2 O 3) based polymeric nanohybrid material as an electron transport layer for OLED application10.1007/s11164-019-03819-y ↗
18. Influence of MnO2 nanoparticles on the optical properties of polypyrrole matrix10.1016/j.mssp.2021.106322 ↗
19. Influence of ZnS on the structural, morphological, optical and thermal properties of Polyindole for an emissive layer10.1016/j.inoche.2022.109824 ↗
20. Fabrication and evaluation of optical characteristics of (PVA-MnO2–ZrO2) nanocomposites for nanodevices in optics and photonics10.15407/ujpe67.10.757 ↗
21. Tailoring the structural and optical features of (PEO–PVA)/(SrTiO3–CoO) polymeric nanocomposites for optical and biological applications10.1007/s00289-023-04676-x ↗
22. M. Negahdary, A. Habibi-tamijani, A. Asadi, S. Ayati, Synthesis of Zirconia Nanoparticles and Their Ameliorative Roles as Additives Concrete Structures, 2013 (2013).10.1155/2013/314862 ↗
23. MoS2 decorated with graphene and polyaniline nanocomposite as an electron transport layer for OLED applications10.1007/s10854-019-02643-9 ↗
24. Augmented optical and electrical properties of PMMA-ZnS nanocomposites as an emissive layer for OLED applications10.1016/j.optmat.2019.03.040 ↗
25. Theoretical prediction of the electronic structure, optical properties and photocatalytic performance of type-I SiS/GeC and type-II SiS/ZnO heterostructures10.1039/D3RA01061A ↗
26. Influence of pH on the structural, spectral, optical, morphological and photocatalytic properties of ZrO2 nanoparticles synthesized by sol-gel technique10.1007/s10854-020-04134-8 ↗
27. Synthesis, crystallography, microstructure, crystal defects, and morphology of Bi x Zn 1–x O nanoparticles prepared by sol-gel technique10.1039/C7CE02173A ↗
28. Intensive comparative study using X-Ray diffraction for investigating microstructural parameters and crystal defects of the novel nanostructural ZnGa2S4 thin films10.1016/j.spmi.2020.106544 ↗
29. Effect of pH on the crystallization of nanocrystalline zirconia in a microwave-hydrothermal process10.1007/s11595-016-1332-9 ↗
30. Synthesis of nitrogen vacancies g-C3N4 with increased crystallinity under the controlling of oxalyl dihydrazide: Visible-light-driven photocatalytic activity10.1016/j.apsusc.2019.144576 ↗
31. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles10.1186/2251-7235-6-6 ↗
32. Controlled synthesis of ZrO2 nanoparticles with tailored size, morphology and crystal phases via organic/inorganic hybrid films10.1038/s41598-018-22088-0 ↗
33. An extensive comparative study for microstructural properties and crystal imperfections of Novel sprayed Cu3SbSe3 Nanoparticle-thin films of different thicknesses
34. Comparative microstructural studies using different methods: effect of Cd-addition on crystallography, microstructural properties, and crystal imperfections of annealed nanostructural thin CdxZn1-xSe films10.1016/j.physb.2021.413267 ↗
35. Emerging chemical functionalization of g-C3N4: Covalent/noncovalent modifications and applications10.1021/acsnano.0c06116 ↗
36. Preparation and characterization of mesoporous g-C3N4/SiO2 material with enhanced photocatalytic activity10.1557/jmr.2019.113 ↗
37. S.B.A., . D.M., . E.K., . V.V., Synthesis and Characterization of ZrO2 Nanoparticles using microwave-assisted method and its antimicrobial activity, J. Nanosci. Technol. 5 (2019) 642–644. https://doi.org/10.30799/jnst.216.19050117.10.30799/jnst.216.19050117 ↗
38. Efficacy of photoluminescence and photocatalytic properties of Mn-doped ZrO2 nanoparticles by facile precipitation method10.1007/s10854-018-9940-0 ↗
39. Investigation of pulse-electropolymerization of conductive polypyrrole nanostructures10.1016/S1452-3981(23)12935-X ↗
40. Electrochemical deposition of polypyrrole/sulfonated graphene composite films10.1021/jp108826e ↗
41. Highly selective molecularly imprinted overoxidized polypyrrole colloids: one-step preparation technique10.2116/analsci.18.41 ↗
42. Graphitic carbon nitride, a saturable absorber material for the visible waveband10.1364/PRJ.6.000307 ↗
43. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
44. C. Xps, How to Compare Samples, (2008) 1–7.
45. Noble-metal-free g-C 3 N 4 /Ni(dmgH) 2 composite for efficient photocatalytic hydrogen evolution under visible light irradiation10.1016/j.apsusc.2014.04.094 ↗
46. ZrO2/g-C3N4 with enhanced photocatalytic degradation of methylene blue under visible light irradiation10.1557/jmr.2014.276 ↗
47. A. Manuscript, R. Society, A. Manuscripts, T.A. Manuscript, A. Manuscripts, R. Society, A. Manuscript, RSC Advances, (n.d.).
48. Optical properties and optoelectrical parameters of the quaternary chalcogenide amorphous Ge15SnxS35-xTe50 films10.1016/j.jnoncrysol.2022.121673 ↗
49. Optical characteristics of thermally evaporated thin a-(Cu 2 ZnGe) 50–x Se 50+x films10.1149/2162-8777/ac627b ↗
50. Thermal and electronic states of exfoliated gC3N4-based nanocomposite with ZrO2 nanoparticles as a robust emissive layer10.1016/j.mssp.2022.107205 ↗
51. Tuning the optical properties of high quantum-yield g-C3N4 with the inclusion of ZnS via FRET for high electron-hole recombination10.1016/j.saa.2022.122162 ↗
52. FRET Mechanism of SnO2 integrated luminescent g-C3N4 nanocomposite and its robust chemical, optical and thermal states for emissive layer application10.1007/s10904-022-02524-5 ↗
53. Fabrication of visible-active ZnO-gC3N4 nanocomposites for photodegradation and cytotoxicity of methyl orange and antibacterial activity towards drug resistance pathogens10.1016/j.optmat.2022.113392 ↗
54. Photocatalytic activity of TiO2/g-C3N4 nanocomposites for removal of monochlorophenols from water10.3390/nano12162852 ↗
55. Fabrication and characterization of ZnO@CdS core-shell nanostructure using acetate precursors: XRD, FESEM, DRS, FTIR studies and effects of cadmium ion concentration on band gap10.1016/j.saa.2014.04.110 ↗
56. Use of diffuse reflectance spectroscopy for optical characterization of un-supported nanostructures
57. Optimum chemical states and localized electronic states of SnO2 integrated PTh– SnO2 nanocomposites as excelling emissive layer (EML)10.1016/j.optmat.2022.112736 ↗
58. Effects of fluorine doping on structural, optical and electrical properties of spray deposited CdO thin films10.1016/j.spmi.2016.09.004 ↗
59. Optical characterization and dispersion discussions of the Novel thermally evaporated thin a-S50-xGe10CdxTe40 films10.1007/s00339-022-06127-2 ↗
60. S. Biswas, Hydrothermally and MOCVD grown nanostructured TiO 2 Thin Films and their performances IN, (2021).
61. Optical and dispersion studies of thin S35-xGe15SnxTe50 films: assessment of some physical parameters of samples10.1088/1402-4896/acc2f9 ↗
62. A. Fakhri, S. Behrouz, I. Tyagi, S. Agarwal, V. Kumar, Synthesis and characterization of ZrO 2 and carbon-doped ZrO 2 nanoparticles for photocatalytic application, 216 (2016) 342–346. https://doi.org/10.1016/j.molliq.2016.01.046.10.1016/j.molliq.2016.01.046 ↗
63. High-performance dual cavity-interferometric volatile gas sensor utilizing Graphene/PMMA nanocomposite10.1016/j.snb.2020.127921 ↗
64. Room-temperature low-voltage electroluminescence in amorphous carbon nitride thin films10.1063/1.1581000 ↗
65. In-situ synthesis of direct solid-state Z-scheme V2O5/g-C3N4 heterojunctions with enhanced visible light efficiency in photocatalytic degradation of pollutants10.1016/j.apcatb.2015.06.057 ↗
66. Intensive linear and nonlinear optical studies of thermally evaporated amorphous thin Cu-Ge-Se-Te films10.1016/j.jnoncrysol.2022.121563 ↗
67. Optical properties of Tm3+/Yb3+ co-doped XAl2O4 (X = Mg, Ca, Sr, and Ba) phosphors: Effect of co-doping of alkaline earths on the radiative as well as non-radiative behaviors10.1016/j.jallcom.2021.161128 ↗
68. Structural analysis and enhanced optoelectronic properties of PIn/CdS nanocomposite, 3Rd Int10.1063/5.0001135 ↗
69. Polypyrrole/metal sulfide hybrid nanocomposites: Synthesis, characterization, and room temperature gas sensing properties10.1590/1980-5373-MR-2015-0502 ↗
70. Co-doped ZrO2 nanoparticles: An efficient visible light-triggered photocatalyst with enhanced structural, optical and dielectric characteristics10.1016/j.ceramint.2020.07.065 ↗