journal article·2024-06

Nanomechanical properties and wear resistance of Palladium diselenide (PdSe2) for flexible electronics

Utku Uzun, Parth Kotak, Mahmudul Alam Shakib, Rabiu Onoruoiza Mamman, Sawsan Daws, Chia-Nung Kuo, Chin Shan Lue, Antonio Politano, Caterina Lamuta

Publisher page

Abstract

Palladium diselenide (PdSe2), a transition-metal dichalcogenide (TMDC), has received interest for its intriguing optical and electrical characteristics. Despite its relevance for flexible electronics, its mechanical properties have been only scarcely investigated. In this work, we examined time-dependent mechanical response, wear, and nanoductility of PdSe2 grown using chemical vapor transport. Specifically, we measured hardness, elastic modulus, creep characteristics, activation volume, strain rate sensitivity, and wear resistance using nanoindentation and nanoscratch experiments. The obtained values of Young's modulus and hardness are promising for flexible electronic applications. Due to its strain hardening and strain-rate sensitivity, PdSe2 is ductile like aluminum and could endure significant deformation without losing structural integrity. The investigation of the creep behavior showed its size-dependent mechanical endurance under steady load, which is important for device dependability. Additionally, activation volume calculations indicate dislocation dynamics and processes during deformation, revealing the material's reaction to different mechanical loading conditions. Our nanoscratch experiments showed resilience to surface wear, confirming its suitability for durable flexible electronic devices. The significant elasticity of PdSe2, facilitating substantial recovery after deformation, renders it well-suited for flexible and wearable electronic devices requiring the maintenance of electrical continuity even under mechanical stress. The results of our mechanical characterization will open the door to the design and manufacturing of next generation PdSe2-based flexible electronic devices. © 2024
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 2D Materials and Applications · MXene and MAX Phase Materials · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Control of light-valley interactions in 2D transition metal dichalcogenides with nanophotonic structures10.1039/D0NR08000D ↗
2. All van der waals integrated nanophotonics with bulk transition metal dichalcogenides10.1021/acsphotonics.0c01964 ↗
3. A new 2D high-pressure phase of PdSe 2 with high-mobility transport anisotropy for photovoltaic applications10.1039/C8TC06050A ↗
4. Low-symmetry PdSe2 for high performance thermoelectric applications
5. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides10.1038/nnano.2012.193 ↗
6. Transition metal dichalcogenide/multi-walled carbon nanotube-based fibers as flexible electrodes for electrocatalytic hydrogen evolution10.1039/D0CC00506A ↗
7. Microstructure Design of Carbonaceous Fibers: a promising strategy toward high-performance Weaveable/Wearable supercapacitors10.1002/smll.202000653 ↗
8. Quantum dots derived from two-dimensional materials and their applications for catalysis and energy10.1039/C5CS00811E ↗
9. Electronic, transport, and optical properties of bulk and mono-layer PdSe210.1063/1.4933302 ↗
10. PdSe2: pentagonal two-dimensional layers with high air stability for electronics10.1021/jacs.7b04865 ↗
11. Highly in-plane Anisotropic 2D PdSe2 for Polarized photodetection with orientation selectivity10.1002/adfm.202006774 ↗
12. Strain-modulated electronic structure and infrared light adsorption in palladium diselenide monolayer
13. High mobility 2D palladium diselenide field-effect transistors with tunable Ambipolar Characteristics Wai10.1002/adma.201602969 ↗
14. Negative poisson’s ratio in monolayer PdSe 210.1016/j.commatsci.2019.01.024 ↗
15. Strain modulated electronic, mechanical, and optical properties of the monolayer PdS2, PdSe2, and PtSe2 for tunable Devices10.1021/acsanm.8b00363 ↗
16. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗
17. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
18. Materials characterization and classification on the basis of materials pile-up surrounding the indentation10.1016/j.msea.2005.07.026 ↗
19. Estimating young’s modulus and poisson’s ratio by instrumented indentation test10.1016/j.msea.2013.03.008 ↗
20. A contact area function for Berkovich nanoindentation: application to hardness determination of a TiHfCN thin film10.1016/j.tsf.2014.02.044 ↗
21. The indentation-induced pop-in phenomenon and fracture behaviors of GaP(100) single-crystal
22. A review of nanoindentation and related cathodoluminescence studies on semiconductor materials10.1007/s10854-022-08995-z ↗
23. The hardness of silicon and germanium10.1016/j.actamat.2007.07.036 ↗
24. Fracture anisotropy in silicon single crystal10.1016/S0921-5093(99)00077-5 ↗
25. Platinum diselenide PtSe2: an ambient-stable material for flexible electronics10.1016/j.mseb.2022.115824 ↗
26. Van der waals direction transformation induced by shear strain in layered PdSe210.1016/j.eml.2021.101231 ↗
27. Berkovich nanoindentation study of monocrystalline tungsten: a crystal plasticity study of surface pile-up deformation10.1080/14786435.2017.1299237 ↗
28. Extraction of plastic properties of aluminum single crystal using Berkovich indentation10.2320/matertrans.M2010132 ↗
29. Mechanical deformation of single-crystal ZnO10.1063/1.1448175 ↗
30. Fisher-Cripps · 2011
31. Effects of loading strain rate and stacking fault energy on nanoindentation creep behaviors of nanocrystalline Cu, Ni-20 wt.%Fe and Ni10.1016/j.jallcom.2015.06.094 ↗
32. Indentation power-law creep of high-purity indium10.1007/s11661-999-0051-7 ↗
33. Size effects of nanoindentation creep10.1557/jmr.2004.19.2.513 ↗
34. Nonlocal superelastic model of size-dependent hardening and dissipation in single crystal Cu-Al-Ni shape memory alloys
35. Combined numerical simulation and nanoindentation for determining mechanical properties of single crystal copper at mesoscale10.1016/j.jmps.2005.07.003 ↗
36. In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal10.1038/nmat2370 ↗
37. Size dependent mechanical properties of single crystalline nickel nanowires10.1063/1.3698625 ↗
38. Nanoindentation creep behavior of single-crystal Bi2Se3 topological insulator
39. Nanoindentation study of size effect on shear transformation zone size in a ni-nb metallic glass10.1016/j.msea.2015.01.001 ↗
40. Revealing nanoindentation size-dependent creep behavior in a la-based metallic glassy film10.3390/nano9121712 ↗
41. Nanoindentation creep behavior of Cu–Zr metallic glass films10.1080/21663831.2017.1383946 ↗
42. On the thin-section size dependent creep strength of a single crystal nickel-base superalloy10.1007/BF00369679 ↗
43. Increased strain rate sensitivity due to stress-coupled grain growth in nanocrystalline al10.1016/j.scriptamat.2006.06.002 ↗
44. Investigation of stress exponent in the power-lawcreep of pb-sb alloys10.1016/j.msea.2004.05.078 ↗
45. Identifiying creep mechanisms at low stresses10.1016/S0921-5093(00)00624-9 ↗
46. Activation volume and density of Mobile dislocations in plastically deforming Zr-1pctSn-1pctNb-0.1pctFe alloy10.1007/s11661-015-3153-4 ↗
47. Nanoindentation creep behavior and its relation to activation volume and strain rate sensitivity of nanocrystalline Cu10.1016/j.msea.2019.02.027 ↗
48. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
49. Competing regimes of rate dependent plastic flow in ultrafine grained metals10.1016/j.msea.2012.09.072 ↗
50. Friction and wear characteristics of bismuth selenide topological insulator10.1016/j.matlet.2023.134402 ↗
51. Nano-scale wear: a review10.1007/s12541-012-0224-y ↗
52. Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique10.1016/j.actamat.2018.01.014 ↗
53. Estimations of work hardening exponents of engineering metals using residual indentation profiles of nano-indentation10.1007/s12206-009-1115-8 ↗
54. Tribological characteristics of ZnO nanowires investigated by atomic force microscope10.1007/s00339-008-4528-9 ↗