journal article·2024-07Open access

Research on N-type silicon crystal processing by liquid-immersion wire electrical discharge machining

Mingbo Qiu, Zongxiu Yao, Rong Wan, Entao Wu, Yimiao Zhang, Jingtao Li

Abstract

Passivation at the input end of N-type silicon crystals leads to a decrease in the efficiency of wire electrical discharge machining (WEDM). In response to this problem, this paper proposes a method for the liquid-immersion WEDM of N-type silicon crystals. An equivalent circuit model for the WEDM of N-type silicon crystals was established, the volt-ampere characteristics of N-type silicon crystals immersed in different liquids at the incoming end were studied, and an experimental platform for the liquid-immersion WEDM of N-type silicon crystals was established. The experimental results demonstrate that immersion in deionized water can effectively suppress the passivation phenomenon at the input end of N-type silicon crystals, thus improving the chip removal conditions between electrodes. Compared to open-loop control machining, the machining efficiency was found to increase by 42.7 % and the surface roughness was decreased by 32.8 %. After continuous machining for 1 h, the current in the machining circuit did not significantly decrease, and the machining efficiency remained unchanged.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Nanowire Synthesis and Applications · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon
2. Subsurface nanocracking in monocrystalline Si (001) induced by nanoscratching10.1016/j.engfracmech.2014.02.016 ↗
3. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
4. Adjustment of resistivity for phosphorus-doped n-type multicrystalline silicon
5. Electron mobility in n-type compensated czochralski silicon crystal
6. The 300 mm silicon wafer — a cost and technology challenge10.1016/S0167-9317(00)00499-8 ↗
7. Development of a resinoid diamond wire containing metal powder for slicing a slicing ingot10.1016/S0007-8506(07)63182-5 ↗
8. Developed diamond wire sawing technique with high slicing ability for multicrystalline silicon wafers10.1080/10426914.2020.1802037 ↗
9. Process on ethanol assisted laser ablation dicing of silicon wafer
10. Investigation on slicing behavior of sSingle crystal silicon wafer in AWJM and influence of micro dimple textured surface for solar applications10.1007/s12633-020-00766-x ↗
11. Experimental research on semiconductor shaping by abrasive-spark hybrid machining10.1007/s00170-017-1013-7 ↗
12. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers10.1081/AMP-120029960 ↗
13. Recent advances in machining of silicon wafers for semiconductor applications10.1007/s001700170185 ↗
14. Discharge cutting technology for specific crystallographic planes of monocrystalline silicon10.1016/j.mssp.2014.07.042 ↗
15. Investigation of silicon wafering by wire EDM10.1007/BF01119742 ↗
16. Micro electrical discharge machining techniques of Semiconducting silicon material
17. Research on micro-EDM for semiconductor silicon
18. Study of electrical discharge machining technology for slicing silicon ingots10.1016/S0924-0136(03)00718-0 ↗
19. Effect of contact materials and pressure on contact resistance in discharge machining of semiconductors
20. Qiu · 2010
21. Analysis of the influence of liquid supply method on inter-electrode flow field in WEDM
22. The experimental research on immersion fluid HSWEDM process
23. Jiao · 2019
24. Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts10.1088/0960-1317/15/2/001 ↗
25. Improvement of EDM efficiency of silicon single crystal through ohmic contact10.1016/S0141-6359(99)00041-0 ↗
26. Study of unidirectional conductivity on the electrical discharge machining of semiconductor crystals10.1016/j.precisioneng.2013.05.009 ↗
27. Hu · 2010