journal article·2023-10

Study on preparation and properties of tetragonal BaTiO3/HA porous scaffolds

Hua Jiao, Zhongyu Li, Xuerui Zhou, Kang Zhao, Yufei Tang

Publisher page

Abstract

In this research, Hydroxyapatite (HA) was introduced into tetragonal BaTiO 3 by rotary evaporation, and the optimal molar ratio of BaTiO 3/HA in the composite was 3:1. The effects of different dispersants on the product phase, morphology and properties were discussed. The electroactive component BaTiO 3 was exposed on the surface of BaTiO 3/HA porous microspheres, which were assembled from finer particles similar to cubic. The specific surface area and pore volume of the samples reached the maximum value of 37.756 m 2g −1 and 0.219 cm 3g −1, respectively. All the samples had good ability to induce bone-like apatite formation in simulated body fluid. Moreover, the minimum d33 value was 3.23 pC/N, which was higher than that of human bone 0.7pC/N. In the PVA system, the porosity of the sintered block at 1000 ℃ was 61.03 %, and the corresponding compressive strength was 139.5 MPa, within the range of ideal bone scaffolds. In addition, all the sample had no cytotoxic effect on MSCs cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair10.1016/j.addr.2015.03.013 ↗
2. Advancements and frontiers in nano-based 3D and 4D scaffolds for bone and cartilage tissue engineering10.2147/IJN.S209431 ↗
3. Bone tissue engineering techniques, advances, and scaffolds for treatment of bone defects10.1016/j.cobme.2020.100248 ↗
4. Comparison of bone formation after sinus membrane lifting without graft or using bone substitute “histologic and evaluation”10.1016/j.joms.2020.12.040 ↗
5. Recent approaches towards bone tissue engineering10.1016/j.bone.2021.116256 ↗
6. In situ printing of scaffolds for reconstruction of bone defects10.1016/j.actbio.2021.03.009 ↗
7. Application of selected scaffolds for bone tissue engineering: a systematic review10.1007/s10006-017-0608-3 ↗
8. Immune responses and their regulation by donor bone marrow cells in clinical organ transplantation10.1016/S0966-3274(03)00056-X ↗
9. Materials design for bone-tissue engineering10.1038/s41578-020-0204-2 ↗
10. A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair10.1016/j.actbio.2010.07.012 ↗
11. Piezoelectric heterogeneity in collagen type I fibrils quantitatively characterized by piezoresponse force microscopy10.1021/acsbiomaterials.0c01314 ↗
12. A complementary contribution to piezoelectricity from bone constituents10.1109/TDEI.2012.6259983 ↗
13. Bone-inspired spatially specific piezoelectricity induces bone regeneration10.7150/thno.19748 ↗
14. Inhibition of bone formation during space flight10.1126/science.150643 ↗
15. Smart piezoelectric biomaterials for tissue engineering and regenerative medicine: a review10.1515/bmt-2021-0265 ↗
16. Mussel-inspired polydopamine-assisted hydroxyapatite as the stationary phase for capillary electrochromatography10.1039/C3AN01668D ↗
17. In vitro biocompatibility assessment of nano-hydroxyapatite10.3390/nano11051152 ↗
18. Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction10.3390/cryst11020149 ↗
19. Preparation and morphological investigation on bioactive ion-modified carbonated hydroxyapatite-biopolymer composite ceramics as coatings for orthopaedic implants10.1016/j.ceramint.2021.09.156 ↗
20. Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity10.1016/j.ceramint.2019.07.219 ↗
21. Nanoscale hydroxyapatite particles for bone tissue engineering10.1016/j.actbio.2011.03.019 ↗
22. The effect of hydroxyapatite reinforcement and preparation methods on the structure and mechanical properties of Mg-HA composites10.1515/secm-2015-0006 ↗
23. On the mechanical characteristics of a self-setting calcium phosphate cement10.1016/j.jmbbm.2017.02.017 ↗
24. Bioactive nano-titanic ceramics with biomechanical compatibility prepared by doping with piezoelectric BaTiO310.1016/j.actbio.2009.02.013 ↗
25. Conventionally Sintered Hydroxyapatite-Barium Titanate Piezo-Biocomposites10.1007/s12666-018-1533-3 ↗
26. Novel porous barium titanate/nano-bioactive glass composite with high piezoelectric coefficient for bone regeneration applications10.1007/s11665-020-05016-0 ↗
27. Barium titanate at the nanoscale: controlled synthesis and dielectric and ferroelectric properties10.1039/C8CS00583D ↗
28. Vibration energy harvesting for degradation of dye and bacterial cells using cement-based Ba0.85Ca0.15Zr0.1Ti0.9O3 composites10.1016/j.mtcomm.2020.101592 ↗
29. Animal models for fracture treatment in osteoporosis10.1007/s00198-005-1859-7 ↗
30. Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering10.1016/j.msec.2014.02.022 ↗
31. Improved osteoblasts growth on osteomimetic hydroxyapatite/BaTiO3 composites with aligned lamellar porous structure10.1016/j.msec.2015.12.009 ↗
32. Polarization and biomineralization of hydroxyapatite-barium titanate composites10.1088/1742-6596/2238/1/012007 ↗
33. Zn-doped mesoporous hydroxyapatites and their antimicrobial properties10.1016/j.colsurfb.2020.111471 ↗
34. Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction10.1021/acsabm.1c00949 ↗
35. Measurements of the dynamic piezoelectric properties of bone as a function of temperature and humidity10.1016/0021-9290(76)90066-X ↗
36. Impact of remnant surface polarization on photocatalytic and antibacterial performance of BaTiO310.1016/j.jeurceramsoc.2019.03.029 ↗
37. Synthesis of plate-like single-crystal hydroxyapatite rods with c-axis orientation by biotemplate small intestinal submucosa10.1016/j.ceramint.2017.06.022 ↗