journal article·2024-05

Yttria containing silicon carbide fibers with high temperature and oxidation resistance

Hongli Liu, Weiqiang Xie, Qi Zhao, Ying Sui, Zhongxian Liu, Tiangang Zhang, Zhiqiang Zhang, Shuang Sun, Jianwei Jia

Publisher page

Abstract

SiC fibers have excellent properties such as high-temperature resistance, oxidation resistance, and high strength, and it is an ideal material for high-temperature structures. However, with the continuous development of technology, the application conditions of the material are becoming more and more stringent. Therefore, the properties of SiC fibers need to be further improved to adapt to the ultra-high temperature environment. In this work, yttrium was introduced into the precursor solution using the precursor transformation method, and yttrium-containing SiC fibers were prepared by electrospinning. The microstructure, chemical composition, oxidation resistance, and mechanical properties of the specimens were tested. The results showed that the samples have good thermal stability after ceramization at 1400 °C, and the Y 2SiO 5 produced in the fiber matrix further improves the antioxidant properties of the fibers. Additionally, the yttrium-containing SiC fibers maintained excellent flexibility, and the high-temperature resistance of SiC fibers was significantly enhanced.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Synthesis pyrolysis of a novel liquid SiBCN ceramic precursor and its application in ceramic matrix composites10.1016/j.jeurceramsoc.2016.11.009 ↗
2. Thermal and oxidation protection of carbon fiber by continuous liquid phase pre-ceramic coatings for high temperature application10.1007/s12221-016-5689-3 ↗
3. In Situ gas–solid reaction and oxidation resistance of silicon carbide coating on carbon fibers10.1111/jace.14179 ↗
4. Significant improvement of the self-protection capability of ultra-high temperature ceramic matrix composites10.1016/j.corsci.2021.109575 ↗
5. Mechanical properties of A356 matrix composites reinforced with nano-SiC particles10.1007/s11223-012-9423-0 ↗
6. A review of dielectric polymer composites with high thermal conductivity10.1109/MEI.2011.5954064 ↗
7. Fabrication of nearly stoichiometric polycrystalline SiC fibers with excellent high-temperature stability up to 1900°C10.1111/jace.15366 ↗
8. A Thermo-damage strength model for the SiC-depleted layer of ultra-high-temperature ceramics on high temperature oxidation10.1142/S1758825113500269 ↗
9. Composition - microstructure - property relationships in ceramic monofilaments resulting from the pyrolysis of a polycarbosilane precursor at 800 to 1400 °C
10. A study on the electron irradiation curing mechanism of polycarbosilane fibres by solid-state 29Si high-resolution nuclear magnetic resonance spectroscopy
11. Effect of SiCxOy Decomposition on Densification of SiCO(Al) Fibers during Sintering Process10.15541/jim20160066 ↗
12. Degradation mechanisms of silicon carbide fibers10.1111/j.1151-2916.1988.tb05033.x ↗
13. Preparation and phase composition optimization of yttrium silicates/SiC multilayer coating coated carbon/carbon composites
14. Fabrication of low thermal conductivity yttrium silicate ceramic flat membrane for membrane distillation10.1016/j.jeurceramsoc.2018.09.028 ↗
15. Evolution of microstructure and thermal conductivity of multifunctional environmental barrier coating systems10.1016/j.mtphys.2020.100304 ↗
16. Mechanical properties and damage tolerance of Y2SiO510.1016/j.jeurceramsoc.2008.04.029 ↗
17. Microstructure and properties of highly porous Y2SiO5 ceramics produced by a new water-based freeze casting10.1016/j.matdes.2012.11.020 ↗
18. Porous Y2SiO5 Ceramic with Low Thermal Conductivity10.1016/S1005-0302(12)60133-9 ↗
19. Yttrium Silicate Coatings for Oxidation Protection of Carbon-Silicon Carbide Composites10.1111/j.1151-2916.2000.tb01392.x ↗
20. Preparation, cross-linking and ceramization of AHPCS/Cp2ZrCl2 hybrid precursors for SiC/ZrC/C composites10.1016/j.jeurceramsoc.2011.12.015 ↗
21. Fabrication and Characterization of Boron Supported YBCO Superconductive Nanofibers by Electrospinning10.2174/157341310791658946 ↗
22. Surface chemical studies on SiC suspension in the presence of chitosan10.1016/j.ceramint.2005.04.023 ↗
23. Flexible, controllable, and high-strength near-infrared reflective Y2O3 nanofiber membrane by electrospinning a polyacetylacetone-yttrium precursor10.1016/j.matdes.2018.10.017 ↗
24. Condensation of Organoyttriumoxanalumoxanes with Chromium Acetylacetonate10.1007/s10904-021-02026-w ↗
25. Yttrium tris-propionate monohydrate: Synthesis, crystal structure, and thermal stability10.1134/S1070328414080077 ↗
26. Preparation, mechanical properties, and diffuse reflectance of YAG continuous fibers and nanofibers10.1016/j.ceramint.2019.07.102 ↗
27. Electrospinning of antibacterial cellulose acetate nanofibers
28. GUZMAN MENDOZA, JOSE. Optical and structural characteristics of Y2O3 thin films synthesized from yttrium acetylacetonate, J. Mater. Sci. https://doi.org/10.1007/s10853-008-2566-5.10.1007/s10853-008-2566-5 ↗
29. Microstructural instability and the resultant strength of Si-C-O (Nicalon) and Si-N-C-O (HPZ) fibers10.1016/0955-2219(95)00178-6 ↗
30. C.Q. Fang, X. Yang, L.y. Chai, Z. Zhang, Y. Q. Weng, L. Zheng, X. Luo, X.X. Zhang, Q.Z. Huang, Ablation property and oxide scale evolution of Y2O3 modified C/C-SiC composites fabricating via precursor infiltration and pyrolysis method, J. Eur. Ceram. Soc. https://doi.org/10.1016/j.jeurceramsoc.2022.10.015.10.1016/j.jeurceramsoc.2022.10.015 ↗
31. Souchard S Gault C, Oxidation of nicalon SiC fibers10.1007/BF00609170 ↗
32. Oxidation behavior of silicon carbide - a review