journal article·2020-02

Experimental data and modeling of electrical conductivity for polymer carbon nanotubes nanobiosensor during degradation in neutral phosphate-buffered saline (PBS)

Yasser Zare, Kyong Yop Rhee

Publisher page

Abstract

Abstract This paper studies the conductivity of poly (lactic acid) (PLA)/poly (ethylene oxide) (PEO)/carbon nanotubes (CNT) nanocomposites during degradation in neutral phosphate-buffered saline (PBS) solution by experimental and modeling results. PLA/PEO/CNT nanocomposites are prepared and the conductivity of samples is measured before and during degradation. This system can be applied as a degradation nanobiosensor, because the variation of conductivity expresses the extent of degradation. A simple model is developed to predict the variation of conductivity during hydrolytic degradation. The degradation of polymers improves the effectiveness of CNT networks in the samples growing the conductivity. The proper agreement between experimental and theoretical results approves the validity of the developed model. A longer degradation time destroys more polymer chains shortening the tunneling space between CNT. The percolation threshold increases during degradation, due to the degradation of interphase zones between polymer and CNT. The calculations demonstrate that the fraction of networked CNT decreases during degradation, because PBS solution attacks the CNT networks. These reasonable predictions validate the developed equations representing the variations of conductivity, tunneling distance, percolation threshold and the fraction of networked CNT in the samples during degradation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. PLA and montmorilonite nanocomposites: properties, biodegradation and potential toxicity10.1007/s10924-013-0577-z ↗
2. The role of shear and stabilizer on PLA degradation10.1016/j.polymertesting.2016.03.005 ↗
3. Biodegradation behavior and modelling of soil burial effect on degradation rate of PLA blended with starch and wood flour10.1016/j.colsurfb.2017.08.056 ↗
4. Hydrolytic degradation behavior of poly (l-lactide)/carbon nanotubes nanocomposites10.1016/j.polymdegradstab.2012.10.009 ↗
5. Preparation and degradation of PLA/chitosan composite materials10.1002/app.12954 ↗
6. Nanoclay and crystallinity effects on the hydrolytic degradation of polylactides10.1016/j.polymdegradstab.2008.05.014 ↗
7. Effect of TiO2 nanoparticles on the long-term hydrolytic degradation behavior of PLA10.1016/j.polymdegradstab.2012.02.011 ↗
8. Synthesis, characterization, and hydrolytic degradation of polylactide/poly (ethylene glycol)/nano-silica composite films10.1080/10601325.2012.662077 ↗
9. Biodegradable poly (L-lactide)/polyhedral oligomeric silsesquioxanes nanocomposites: enhanced crystallization, mechanical properties, and hydrolytic degradation10.1021/ma9023685 ↗
10. Expression of normal stress difference and relaxation modulus for ternary nanocomposites containing biodegradable polymers and carbon nanotubes by storage and loss modulus data
11. Prediction of complex modulus in phase-separated poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites10.1016/j.polymertesting.2018.01.031 ↗
12. Modeling of viscosity and complex modulus for poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites assuming yield stress and network breaking time10.1016/j.compositesb.2018.08.058 ↗
13. Analysis of complex viscosity and shear thinning behavior in poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes biosensor based on Carreau-Yasuda model10.1016/j.rinp.2019.102245 ↗
14. Micromechanical modeling of thermal conducting behavior of general carbon nanotube-polymer nanocomposites10.1016/j.mseb.2017.12.039 ↗
15. Materials and processing of polymer-based electrochromic devices10.1016/j.mseb.2017.11.016 ↗
16. Effect of MWCNTs on piezoelectric and ferroelectric properties of KNN composites10.1016/j.mseb.2018.09.001 ↗
17. Synthesis and study of hydrolyzed polyacrylamide grafted polyvinyl pyrrolidone (Hyd. PVP-g-PAM) as flocculant for removal of nanoparticles from aqueous system10.1016/j.mseb.2018.11.020 ↗
18. Electromagnetic interference shielding behavior of hybrid carbon nanotube/exfoliated graphite nanoplatelet coated glass fiber composites10.1016/j.mseb.2019.114403 ↗
19. Ternary photocatalyst based on conducting polymer doped functionalized multiwall carbon nanotubes decorated with nanorods of metal oxide10.1016/j.mseb.2019.04.002 ↗
20. Hybridization of silver nanoparticles and reduced graphene nanosheets into a nanocomposite for highly sensitive L-phenylalanine biosensing10.1016/S1452-3981(23)06765-2 ↗
21. Electroanalytical validation of a novel nanobiosensing strategy and direct electrochemistry of phenylalanine dehydrogenase for clinical diagnostic applications10.1016/S1452-3981(23)07928-2 ↗
22. Sandwich-structured nanoparticles-grafted functionalized graphene based 3D nanocomposites for high-performance biosensors to detect ascorbic acid biomolecule10.1038/s41598-018-37573-9 ↗
23. A novel approach to facile synthesis and biosensing of the protein-regulated graphene10.20964/2018.01.73 ↗
24. A new mathematical approach to predict the actual drug release from hydrogels10.1016/j.ejps.2017.09.038 ↗
25. Generation of the pores on graphene surface and their reinforcement effects on the thermal and mechanical properties of chitosan-based composites10.1016/j.compositesb.2017.02.018 ↗
26. Poly (lactic acid)/carbon nanotube nanocomposites with integrated degradation sensing10.1016/j.polymer.2013.10.035 ↗
27. Simplification and development of McLachlan model for electrical conductivity of polymer carbon nanotubes nanocomposites assuming the networking of interphase regions10.1016/j.compositesb.2018.08.056 ↗
28. Variations of tunneling properties in poly (lactic acid)(PLA)/poly (ethylene oxide)(PEO)/carbon nanotubes (CNT) nanocomposites during hydrolytic degradation10.1016/j.sna.2018.03.004 ↗
29. Modeling the roles of carbon nanotubes and interphase dimensions in the conductivity of nanocomposites10.1016/j.rinp.2019.102562 ↗
30. The deformation behavior of conductivity in composites where charge carrier transport is by tunneling: theoretical modeling and experimental results10.1016/j.synthmet.2004.09.028 ↗
31. Effects of inter-tube distance and alignment on tunnelling resistance and strain sensitivity of nanotube/polymer composite films10.1088/0957-4484/23/5/055703 ↗
32. A multistep methodology for effective conductivity of carbon nanotubes reinforced nanocomposites10.1016/j.jallcom.2019.04.070 ↗
33. R. Razavi, Y. Zare, K.Y. Rhee, The roles of interphase and filler dimensions in the properties of tunneling spaces between CNT in polymer nanocomposites, Polym. Compos.
34. Dominant role of tunneling resistance in the electrical conductivity of carbon nanotube–based composites10.1063/1.2819690 ↗
35. Simulation of interphase percolation and gradients in polymer nanocomposites10.1016/j.compscitech.2008.11.022 ↗
36. A simple model for constant storage modulus of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites at low frequencies assuming the properties of interphase regions and networks10.1016/j.jmbbm.2018.01.037 ↗
37. Tensile strength prediction of carbon nanotube reinforced composites by expansion of cross-orthogonal skeleton structure10.1016/j.compositesb.2019.01.001 ↗
38. Evaluation of the tensile strength in carbon nanotube-reinforced nanocomposites using the expanded Takayanagi model
39. Effects of interphase regions and filler networks on the viscosity of PLA/PEO/carbon nanotubes biosensor10.1002/pc.25274 ↗
40. Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites10.1016/j.polymer.2011.06.046 ↗
41. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites10.1016/j.compositesa.2012.12.008 ↗
42. An analytical model of effective electrical conductivity of carbon nanotube composites10.1063/1.2857468 ↗
43. Effects of matrix viscosity, mixing method and annealing on the electrical conductivity of injection molded polycarbonate/MWCNT nanocomposites10.1016/j.polymer.2016.01.051 ↗
44. Y. Zare, K.Y. Rhee, Significances of interphase conductivity and tunneling resistance on the conductivity of carbon nanotubes nanocomposites, Polym. Compos.
45. Evaluation and development of expanded equations based on takayanagi model for tensile modulus of polymer nanocomposites assuming the formation of percolating networks10.1134/S1029959918040094 ↗
46. Modeling percolation in high-aspect-ratio fiber systems. I. Soft-core versus hard-core models
47. Influence of carbon nanotube waviness on the stiffness reduction of CNT/polymer composites10.1016/j.compstruct.2012.10.028 ↗
48. A developed equation for electrical conductivity of polymer carbon nanotubes (CNT) nanocomposites based on Halpin-Tsai model
49. Tensile modulus of polymer nanocomposites10.1002/pen.11007 ↗
50. Following the morphological and thermal properties of PLA/PEO blends containing carbon nanotubes (CNTs) during hydrolytic degradation10.1016/j.compositesb.2019.107132 ↗
51. Simple model for hydrolytic degradation of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanobiosensor in neutral phosphate-buffered saline solution10.1002/jbm.a.36774 ↗
52. Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes10.1002/adfm.200700065 ↗
53. Effect of interphase percolation on mechanical behavior of nanoparticle-reinforced polymer nanocomposite with filler agglomeration: A multiscale approach10.1016/j.cplett.2015.06.054 ↗