Investigation on influence factors of opto-electrostatic hybrid driving torsion actuator based on PLZT ceramic
Source abstract
Abstract
Abstract PLZT (lanthanum-doped lead zirconate titanate) ceramic has obtained widespread applications in the engineering fields. Especially, it has broad application prospects in driving field. In this article, aiming at the proposed opto-electrostatic hybrid driving torsion actuator, the influence of different factors on driving voltage and output deformation is analyzed and verified by a new mathematical model and a variety of experiments. According to the analysis and experimental results, different PLZT ceramics with different sizes can produce different driving voltage and deformation of the actuator. And as the length of the torsion beam increases or the width of the torsion beam decreases, the deformation increases while the driving voltage remains the same. The driving performance is better when the copper foil attached to the right end of the upper electrode. Moreover, when the area of copper foil decreases or the distance between electrodes increases, the driving voltage increases while the change of deformation is determined by driving voltage, area and distance between electrodes. Therefore, the analysis of the influence factors can not only explore their influence on driving performance, but also provide a theoretical basis for the practical application of opto-electrostatic hybrid driving torsion actuator based on PLZT ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical and Optical Resonators · Advanced MEMS and NEMS Technologies · Optical Coherence Tomography Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Displacement measurement with a self-sensing MEMS electrostatic drive10.1109/JMEMS.2014.2314296 ↗
2. A small-gap electrostatic micro-actuator for large deflections10.1038/ncomms10078 ↗
3. Development of copper based miniature electrostatic actuator using WEDM with low actuation voltage10.1007/s00542-014-2360-z ↗
4. Stability analysis and structure optimization of the electrostatic comb-finger micro-actuator
5. Effects of voltage change on the dynamics in a comb-drive finger of an electrostatic actuator10.1016/j.ijnonlinmec.2017.05.008 ↗
6. M. Gaudet, S. Uhlig, M. Stolz, S. Arscott, H. Conrad, S. Langa, B. Kaiser, H. Schenk, Electrostatic bending actuators with a liquid filled nanometer scale gap, IEEE International Conference on Micro Electro Mechanical Systems (2017).10.1109/MEMSYS.2017.7863369 ↗
7. Design of a novel MEMS microgripper with rotatory electrostatic comb-drive actuators for biomedical applications10.3390/s18051664 ↗
8. A new MEMS based variable capacitor using electrostatic vertical comb drive actuator and auxiliary cantilever beams10.1007/s00542-019-04293-7 ↗
9. An optically driven microgripper based on the photostrictive materials
10. Experimental research on the response characteristics of PLZT ceramics10.1088/0964-1726/24/7/075017 ↗
11. Design and analysis of an innovative light tracking device based on opto-thermo-electromechanical actuators10.1016/j.mee.2014.01.019 ↗
12. Transparent lead lanthanum zirconate titanate (PLZT) ceramic fibers for high-frequency ultrasonic transducer applications10.1016/j.ceramint.2016.08.195 ↗
13. Experimental investigation of photostrictive materials for MEMS application
14. Driving characteristics of PLZT/PVDF laminated flexible cantilever beam
15. Size-dependent static bending and free vibration of 0–3 polarized PLZT microcantilevers10.1088/0964-1726/25/8/085025 ↗
16. Size-dependent models of 0–1/0–3 polarized PLZT unimorphs and bimorphs based on a modified couple stress theory10.1016/j.mechrescom.2018.08.015 ↗
17. A new photovoltaic lunar dust removal technique based on the coplanar bipolar electrodes10.1088/1361-665X/ab28da ↗
18. Experiments on dust removal performance of a novel PLZT driven lunar dust mitigation technique10.1016/j.actaastro.2019.08.023 ↗
19. Closed-loop photovoltage control of lead lanthanum zirconate titanate ceramic for photovoltaic-electrostatic-driven servo system10.1177/1045389X17692049 ↗
20. Closed-loop control for deflection of cantilever beam based on hybrid photovoltaic/piezoelectric actuation mechanism10.3233/JAE-160067 ↗
21. The light-controlled actuator driven by the novel opto-electrostatic hybrid driving method based on PLZT ceramic10.3233/JAE-190035 ↗