journal article·2020-04

The effects of pulverization treatment for the mechanical properties of polyamide 6 fiber filled with carbon nanotubes

Toshihira Irisawa, Daisuke Shimamoto, Kazunari Takeshige, Genta Doi, Yasuhiro Tanabe, Yuji Hotta

Publisher page

Abstract

Abstract An advanced and latest method for pulverizing the aggregates of carbon nanotubes (CNTs) by wet-jet milling process has been adopted for reinforcement of polyamide 6 (PA6) fibers. Unpulverized and pulverized CNTs were added to PA6 fibers by using general type kneading and spinning apparatus. Although the tensile modulus of PA6 fibers 6% increased by adding CNTs, regardless of the pulverization treatment, the tensile strength 10% increased only by adding pulverized CNTs. The improvements in the mechanical properties were attributed to the mechanical properties of CNTs themselves because CNTs have little effect on the crystallization and interaction with polymer chains of PA6. On the other hand, the aggregates were observed in PA6 fibers with unpulverized CNTs while CNTs were highly dispersed in PA6 fibers with pulverized CNTs. Therefore, it is revealed that the pulverization of CNTs is a significant factor for improving tensile strength of PA6 fibers. Applying pulverization technique to PA6 fibers aids a feasibility of wide range of applications such as tennis racket strings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Tribology and Wear Analysis · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Preparation of high-modulus nylon 6 fibers by vibrating hot drawing and zone annealing10.1002/(SICI)1097-4628(19980321)67:12<1993::AID-APP5>3.0.CO;2-I ↗
2. Wear Resistance and Tensile Properties of Filler-added Polyamide 6 Fibers10.2115/fiber.67.109 ↗
3. Polymer composite fibers with carbon nanofiber10.2115/fiber.63.P_195 ↗
4. Strength and breaking mechanism of multiwalled carbon nanotube under tensile load10.1126/science.287.5453.637 ↗
5. B. G. Demczyk, Y. M. Wang, J. Cumings, M. Hetman, W. Han, A. Zettl, Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotube.
6. Frictional properties of carbon nanofiber reinforced polymer matrix composites
7. Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite films10.1016/S0008-6223(03)00387-7 ↗
8. High performance nanotube-reinforced plastics: understanding the mechanism of strength increase10.1002/adfm.200305200 ↗
9. Significant improvement of mechanical properties observed in highly aligned carbon-nanotube-reinforced nanofibers10.1021/jp8077198 ↗
10. A comparative study of fracture behavior between carbon black/poly(ethylene terephthalate) and multiwalled carbon nanotube/poly(ethylene terephthalate) composite films10.1002/app.26685 ↗
11. Synthesis, structure, and properties of PBO/SWNT composites10.1021/ma0205055 ↗
12. Morphology and properties of melt-spun polycarbonate fibers containing single- and multi-wall carbon nanotubes10.1016/j.polymer.2006.01.003 ↗
13. Processing and properties of poly (methyl methacrylate)/carbon nano fiber composites
14. Effect of wet jet milling of carbon nanotube on electrical properties of polymer nanocomposites10.1016/j.matchemphys.2014.09.044 ↗
15. A. Almowarai, Y. Ueno, Y. Show, Fabrication of CNT dispersion fluid by wet-jet milling method for coating on bipolar plate of fuel cell, Journal of Nanomaterials 2015 (2015), Article ID 315017 7 pages.10.1155/2015/315017 ↗
16. Polymorphism of nylon-6 in multiwalled carbon nanotubes/nylon-6 composites10.1002/polb.20808 ↗
17. Crystallization behavior of nylon 6 nanocomposites10.1016/S0032-3861(03)00344-6 ↗
18. Structure variations of high tenacity Nylon 6 fiber on cyclic temperature changes10.4188/jte.52.107 ↗
19. Analysis of defects in polymeric fibers10.2115/fiber.60.346 ↗
20. On the estimation of the tensile strength of carbon fibres at short lengths