journal article·2019-04Open access

The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics

Branimir N. Grgur, Marija Janačković, Branimir Z. Jugović, Milica M. Gvozdenović

Abstract

The electrochemically synthesized polypyrrole (PPy) is investigated as a possible active material of the low-cost aqueous based secondary power sources in combination with zinc, lead oxide, and lead sulfate. The discharge capacity of the polypyrrole in the chloride-based electrolyte (for the Zn|PPy cell) is in the range 110 mAh g −1 of PPy, while in the sulfate-based electrolyte ∼150 mAh g −1 of PPy (for the PbSO 4 |PPy and PPy|PbO 2 cells), which is close to the theoretically calculated values. Electrochemical and electrical parameters, reactions in the cells, specific capacity, specific capacitance, energy, and power, for the Zn|PPy, PPy|PbO 2 and PbSO 4 |PPy cells are determined. In addition, the energy efficiency, for the considered systems is estimated. Obtained values of the specific power and energy, could classified investigated systems as a battery type hybrid superacapacitors or “supercapattery”. © 2019 Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Electrochemical chains using protolytic organic semiconductors10.1016/0013-4686(68)80071-4 ↗
2. Electrochemically active polymers for rechargeable batteries10.1021/cr941181o ↗
3. Intrinsically conducting polymers in electrochemical energy technology: trends and progress10.1016/j.electacta.2013.08.100 ↗
4. Conducting-polymer-based supercapacitor devices and electrodes10.1016/j.jpowsour.2010.06.084 ↗
5. Conducting polymers-based electrochemical supercapacitors-progress and prospects10.1016/j.electacta.2012.09.116 ↗
6. Flexible cellulose based polypyrrole–multiwalled carbon nanotube films for bio-compatible zinc batteries activated by simulated body fluids10.1039/c3ta13137h ↗
7. One-step synthesis of graphene/polypyrrole nanofiber composites as cathode material for a biocompatible zinc/polymer battery10.1021/am503572w ↗
8. Polypyrrole as cathode materials for Zn-polymer battery with various biocompatible aqueous electrolytes10.1016/j.electacta.2013.02.055 ↗
9. Ultrafast all-polymer paper-based batteries10.1021/nl901852h ↗
10. Electrode materials for aqueous rechargeable lithium batteries10.1007/s10008-010-1117-6 ↗
11. An aqueous electrochemical energy storage system based on doping and intercalation: Ppy/LiMn2O410.1002/cphc.200800424 ↗
12. An aqueous rechargeable lithium battery based on doping and intercalation mechanisms10.1007/s10008-009-0869-3 ↗
13. An aqueous rechargeable lithium battery of excellent rate capability based on a nanocomposite of MoO3 coated with PPy and LiMn2O410.1039/c2ee21294c ↗
14. A hybrid of V2O5 nanowires and MWCNTs coated with polypyrrole as an anode material for aqueous rechargeable lithium batteries with excellent cycling performance10.1039/c2jm34563c ↗
15. Polypyrrole-coated LiV3O8-nanocomposites with good electrochemical performance as anode material for aqueous rechargeable lithium batteries10.1016/j.jpowsour.2012.09.100 ↗
16. Inherently conducting polymers via electropolymerization for energy conversion and storage
17. Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries10.1016/j.electacta.2008.01.056 ↗
18. Metal | polypyrrole battery with the air regenerated positive electrode10.1016/j.jpowsour.2014.09.033 ↗
19. Battery type hybrid supercapacitor based on polypyrrole and lead-lead sulfate10.1016/j.jpowsour.2016.02.081 ↗
20. Hybrid energy storage: the merging of battery and supercapacitor chemistries10.1039/C4CS00266K ↗
21. Electrochemical characteristics of rechargeable polyaniline/lead dioxide cell10.1016/j.jpowsour.2012.06.025 ↗
22. Conducting polymer films of cross-linked structure and their QCM analysis10.1016/S0013-4686(00)00466-7 ↗
23. Spectroelectrochemical study of polypyrrole films10.1016/S0022-0728(83)80561-0 ↗
24. Polypyrrole: a conducting polymer; its synthesis, properties, and applications10.1070/RC1997v066n05ABEH000261 ↗
25. Formation of polypyrrole coatings on stainless steel in aqueous benzene sulfonate solution10.1016/S0013-4686(97)00012-1 ↗
26. Comparison of surface and bulk doping levels in chemical polypyrroles of low, medium and high conductivity10.1002/sia.2457 ↗
27. Kinetics of the electrochemical degradation of polypyrrole10.1016/S0141-3910(01)00226-9 ↗
28. Electrochemical overoxidation of conducting polypyrrole nitrate film in aqueous solutions10.1016/S0013-4686(99)00392-8 ↗
29. On the question of electrochemical activity of differently formed lead dioxides10.1016/S0378-7753(00)00460-2 ↗
30. EQCM study of the ion exchange behaviour of polypyrrole with different counter ions in different electrolytes10.1016/j.electacta.2004.10.032 ↗
31. Coulombic efficiency of lead/acid batteries, particularly in remote-area power-supply (RAPS) systems10.1016/0378-7753(91)80055-3 ↗
32. 2001
33. Lithium rocking chair batteries: an old concept?10.1149/1.2068978 ↗
34. Electrochemical capacitors: technical challenges and prognosis for future markets10.1016/j.electacta.2012.03.059 ↗
35. Hybridization of rechargeable batteries and electrochemical capacitors: principles and limits10.1016/j.electacta.2012.03.151 ↗
36. The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices10.1039/c0nr00594k ↗
37. Redox electrode materials for supercapatteries10.1016/j.jpowsour.2016.04.095 ↗
38. High energy supercapattery with an ionic liquid solution of LiClO410.1039/C5FD00232J ↗