Effect of Zn 2 P 2 O 7 additive on the electrical breakdown strength and energy storage properties of (Ba 0.6 Sr 0.4 ) 0.85 Bi 0.1 TiO 3 ceramics
Source abstract
Abstract
Abstract (Ba0.6Sr0.4)0.85Bi0.1TiO3 (abbreviated as BSBT) ceramics doped with x wt% Zn2P2O7 (x = 0, 1, 5, 10, 15) were synthesized. The influence of Zn2P2O7 on microstructures and electrical properties of BSBT ceramics were studied. Microstructural observation indicated that Zn2P2O7 doping could inhibit the growth of grain and improve the microstructure homogeneity of BSBT ceramics. Dielectric measurements exhibited a relaxor-like characteristic for all samples. Breakdown strength measurements indicated that undoped BSBT ceramics owned a breakdown strength of 122 kV/cm. However, with increasing Zn2P2O7 content, the breakdown strength enhanced monotonously, and the maximum breakdown strength reached 326 kV/cm at x = 15. Meanwhile, the energy storage efficiency was improved greatly by Zn2P2O7 addition. The results suggest that BSBT ceramics doped with Zn2P2O7 could be taken for a candidate for energy storage applications. In addition, the correlation between energy storage efficiency and interface polarization was qualitatively discussed by complex impedance spectra.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. High-energy density capacitors utilizing 0.7BaTiO3-0.3BiScO3 ceramics10.1111/j.1551-2916.2009.03104.x ↗
2. High energy density, high temperature capacitors utilizing Mn-doped 0.8CaTiO3-0.2CaHfO3 ceramics10.1111/j.1551-2916.2011.04962.x ↗
3. Dielectric responses of glass-added Ba0.95Ca0.05Zr0.3Ti0.7O3 ceramics for energy storage capacitors10.1016/j.physb.2014.01.025 ↗
4. High energy density in silver niobate ceramics10.1039/C6TA06353E ↗
5. Preparation and dielectric properties of Sr(Ti0.95Zr0.05)O3 ceramics doped with CaO-TiO2-SiO2 (CTS)10.1016/j.mseb.2006.06.011 ↗
6. Influence of Sr/Ba ratio on the energy storage properties and dielectric relaxation behaviors of strontium barium titanate ceramics
7. Effect of grain size on the energy storage properties of (Ba0.4Sr0.6)TiO3 paraelectric ceramics10.1016/j.jeurceramsoc.2013.11.039 ↗
8. Ba0.4Sr0.6TiO3/MgO composites with enhanced energy storage density and low dielectric loss for solid-state pulse forming line10.1111/j.1744-7402.2009.02456.x ↗
9. Dielectric relaxation behavior and energy storage properties in SrTiO3 ceramcis with trace amounts of ZrO2 additives10.1016/j.ceramint.2014.05.147 ↗
10. Dielectric properties and energy storage density in ZnO-doped Ba0.3Sr0.7TiO3 ceramics10.1016/j.ceramint.2008.11.003 ↗
11. Effect of SiO2 additive on dielectric response and energy storage performance of Ba0.4Sr0.6TiO3 ceramics10.1016/j.ceramint.2016.04.169 ↗
12. Improved energy storage density in barium strontium titanate by addition of BaO-SiO2-B2O3 glass10.1111/j.1551-2916.2009.03109.x ↗
13. Property optimization of BST-based composite glass ceramics for energy-storage applications10.1016/j.ceramint.2013.07.145 ↗
14. Dielectric tunable properties of high dielectric breakdown Ba0.5Sr0.5TiO3-Zn2P2O7 composite ceramics10.1016/j.ceramint.2011.04.048 ↗
15. Enhanced energy storage density of Ba0.4Sr0.6TiO3-MgO composite prepared by spark plasma sintering10.1016/j.jeurceramsoc.2014.11.022 ↗
16. Relaxor ferroelectric BaTiO3-Bi(Mg2/3Nb1/3)O3 ceramics for energy storage application10.1111/jace.13325 ↗
17. Dielectric porperties of bismuth doped Ba1−xSrxTiO3 ceramics10.1016/S0955-2219(00)00239-9 ↗
18. Microwave dielectric properties of A2P2O7 (A = Ca, Sr, Ba, Mg, Zn, Mn)10.1143/JJAP.43.3521 ↗
19. Revised effective ionic radii and systematic studies of interatomic distance in halides and chalcogenides10.1107/S0567739476001551 ↗
20. Thermally stable BaTiO3-Bi(Mg2/3Nb1/3)O3 solid solution with high relative permittivity in a broad temperature usage range10.1111/jace.13357 ↗
21. Dielectric breakdown of porous ceramics10.1063/1.1735030 ↗
22. Effect of liquid-phase sintering on the breakdown strength of barium titanate10.1111/j.1551-2916.2007.01637.x ↗
23. Correlation between dielectric breakdown strength and interface polarization in barium strontium titanate glass ceramics10.1063/1.3293456 ↗
24. Dielectric strength of fine grained barium titanate ceramics10.1007/BF00275336 ↗
25. Proposed universal relationship between dielectric breakdown and dielectric constant10.1109/IEDM.2002.1175919 ↗
26. The contribution of electrical conductivity, dielectric permittivity and domain switching in ferroelectric hysteresis loops10.1142/S2010135X11000148 ↗
27. Influence of sintering temperature on energy storage properties of BaTiO3–(Sr1−1.5xBix) TiO3 ceramics10.1016/j.ceramint.2012.02.064 ↗
28. Dielectric properties of (1−x)Sr0.84Pb0.16TiO3−xBi2O3·3TiO2 ceramics for high voltage capacitor application10.1080/00150193.2016.1242054 ↗
29. Correlation of energy conversion efficiency and interface polarization in niobate glass-ceramic for energy-storage applications10.1063/1.4919004 ↗
30. Oxygen-vacancy-related low frequency dielectric relaxation and electrical conduction in Bi:SrTiO310.1103/PhysRevB.62.228 ↗
31. Glass additive in barium titanate ceramics and its influence on electrical breakdown strength in relation with energy storage properties10.1016/j.jeurceramsoc.2011.09.024 ↗