journal article·2018-12

Carbon nanotubes functionalized with maleic anhydride chelated silver nanoparticles as conductive additives for polyanion-based lithium-ion batteries

Chih-Lien Chiang, Cheng-Chien Wang, Chuh-Yung Chen

Publisher page

Abstract

Abstract Silver nanoparticles on the surface of carbon nanotubes functionalized with maleic anhydride through plasma-induced grafting process, named CNTs-MA-Ag, were synthesized. Effects of CNTs-MA-Ag as conductive additives on the performance of LiFePO4 polyanion-based lithium-ion batteries was studied. X-ray diffraction analysis, transmission electron microscopy, and UV-vis spectroscopy were used to characterize Ag nanoparticles on the surface of CNTs-MA-Ag. Morphology of LiFePO4/CNTs-MA-Ag electrode was observed via scanning electronic microscopy. Electrochemical impedance spectroscopy analysis was conducted to acquire the charge transfer resistance of composite cathode. The specific capacity, cyclic stability and rate performance of LiFePO4/CNTs-MA-Ag coin cells were evaluated through galvanostatic charge/discharge process. LiFePO4/CNTs-MA-Ag (5 wt%) coin cells have specific capacity of 148 mAhg−1 at 0.1C with a capacity retention ratio of 98.6% after 100 cycles, and rate capacity of 113.6 and 77.8 mAhg−1 at 1C and 2C, respectively. Taken together, CNTs-MA-Ag can serve as excellent conductive additives to improve performance of polyanion-based LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
2. Coating effect of LiFePO4 and Al2O3 on Li1.2Mn0.54Ni0.13Co0.13O2 cathode surface for lithium ion batteries10.1016/j.jpowsour.2017.04.008 ↗
3. Enhanced electrochemical performances of Na-doped cathode material LiNi1/3Co1/3Mn1/3O2 for lithium-ion batteries10.1007/s10853-017-1449-z ↗
4. Nano-Y2O3-coated LiNi0.5Co0.2Mn0.3O2 cathodes with enhanced electrochemical stability under high cut-off voltage and high temperature10.1016/j.ceramint.2017.06.028 ↗
5. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
6. High, energy density polyanion electrode material: LiVPO4O1−xFx (x ≈0.25) with Tavorite Structure10.1021/acs.chemmater.7b00124 ↗
7. Stabilization of lithium transition metal silicates in the olivine structure10.1021/acs.inorgchem.7b01453 ↗
8. Mechanical milling assisted synthesis and electrochemical performance of high capacity LiFeBO3 for lithium batteries10.1021/acsami.5b10747 ↗
9. The effect of polymorphism on the lithium storage performance of Li2MnSiO410.1016/j.jpowsour.2015.12.033 ↗
10. Effect of Fe doping followed by C+SiO2 hybrid layer coating on Li3V2(PO4)3 cathode material for lithium-ion batteries10.1016/j.ceramint.2016.07.075 ↗
11. Insight into Fe incorporation in Li3V2(PO4)3 cathode material10.1149/2.001210jes ↗
12. Synthesis and characterization of carbon-coated Li3V2(PO4)3 cathode materials with different carbon sources10.1016/j.electacta.2009.01.011 ↗
13. A review on integrating nano-carbons into polyanion phosphates and silicates for rechargeable lithium batteries10.1016/j.carbon.2015.02.047 ↗
14. Carbon nanotube (CNT)-based composites as electrode material for rechargeable Li-ion batteries: a review10.1016/j.compscitech.2011.11.019 ↗
15. Carbon nanotubes – the route toward applications10.1126/science.1060928 ↗
16. Functionalizing carbon nanotubes by plasma modification for the preparation of covalent-integrated epoxy composites10.1021/cm062277p ↗
17. Growth of Ag nanoparticles using plasma-modified multi-walled carbon nanotubes10.1088/0957-4484/19/03/035606 ↗
18. Effects of Al interlayer coating and thermal treatment on electron emission characteristics of carbon nanotubes deposited by electrophoretic method10.1186/1556-276X-9-236 ↗
19. Sonochemical deposition of silver nanoparticles on silica spheres10.1021/la0155552 ↗
20. Green, approach to decorate multi-walled carbon nanotubes by metal/metal oxide nanoparticles
21. Biosynthesis and characterization of silver nanoparticles using panchakavya, an indian traditional farming formulating agent10.2147/IJN.S58932 ↗
22. Hierarchically porous LiFePO4/nitrogen-doped carbon nanotubes composite as a cathode for lithium ion batteries10.1039/c2jm30380a ↗
23. Design and electrochemical investigation of a novel graphene oxide-silver joint conductive agent on LiFePO4 cathodes in rechargeable lithium-ion batteries10.1016/j.jiec.2016.01.037 ↗
24. Effect of silver and carbon double coating on the electrochemical performance of LiFePO4 cathode material for lithium ion batteries10.1016/j.ijhydene.2016.03.074 ↗