journal article·2017-11

Improved structural stability and electrochemical performance of 8YSZ electrolyte by MxOy doping for low temperature solid oxide fuel cells (LT-SOFCs)

Hazem Bouhamed

Publisher page

Abstract

Abstract The role of nanosized metallic oxides (MxOy) in phase stability, thermal behavior and electrical conductivity of 8 mol% yttria stabilized zirconia (8YSZ) has been investigated. 8YSZ co-doped with 4 mol% MxOy (YSZ-MxOy) powders have been elaborated by solid state reaction at 1500 °C during 12 h. The ionic conductivity of 8YSZ has been improved by adding CeO2, ZnO or their mixture CeO2-ZnO as nanosized stabilizers for ZrO2 matrix in the temperature field from 400 °C to 600 °C. Finally, the performance evaluation of 200 μm thick film YSZ-MxOy as electrolyte for Solid Oxide Fuel Cells (SOFCs) has been discussed. The open circuit voltage has been 1.03 V and the maximum power density has been 440 mW·cm−2 at 600 °C, in the presence of 3.5 mol% CeO2, 0.5 mol% ZnO and 8 mol% Y2O3 co-doped zirconia.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Characterization of thin films of ceria-based electrolytes for intermediate temperature – solid oxide fuel cells (IT-SOFC)10.1007/BF02376531 ↗
2. Fabrication of ceramic electrolytic films by the method of solution aerosol thermolysis (SAT) for solid oxide fuel cells (SOFC)10.1007/s11581-009-0313-9 ↗
3. Transport properties of solid oxide electrolyte ceramics: a brief review10.1016/j.ssi.2004.06.015 ↗
4. Microstructure-property modifications in plasma sprayed 20 wt.% yttria stabilized zirconia electrolyte by spark plasma sintering (SPS) technique10.1016/j.msea.2003.08.119 ↗
5. High-performance ultra-thin film solid oxide fuel cell using anodized-aluminum-oxide supporting structure10.1016/j.elecom.2014.07.008 ↗
6. Solid oxide fuel cells: fundamental aspects and prospects10.1016/S0013-4686(00)00330-3 ↗
7. Bismuth oxide-coated (La, Sr) MnO3 cathodes for intermediate temperature solid oxide fuel cells with yttria-stabilized zirconia electrolytes10.1016/j.electacta.2008.11.067 ↗
8. Solid oxide fuel cell with corrugated thin film electrolyte10.1021/nl800977z ↗
9. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells10.1021/cm070913t ↗
10. High-performance ultrathin solid oxide fuel cells for low-temperature operation10.1149/1.2372592 ↗
11. Nanoscale membrane electrolyte array for solid oxide fuel cells10.1016/j.elecom.2011.12.002 ↗
12. Improved solid oxide fuel cell performance with nanostructured electrolytes10.1021/nn201354p ↗
13. Study on zirconia solid electrolytes doped by complex additives10.1016/j.msea.2006.12.072 ↗
14. Oxygen exchange and diffusion in the near surface of pure and modified yttria stabilized zirconia10.1016/S0167-2738(02)00759-2 ↗
15. Investigation of Scandia yttria zirconia systems as an electrolyte material for intermediate temperature fuel cells: influence of yttria content in (Y2O3)x(Sc2O3)11-x(ZrO2)8910.1016/j.ssi.2004.02.007 ↗
16. Furnace cyclic oxidation behavior of multi-component low conductivity thermal barrier coatings10.1007/s11666-004-0053-3 ↗
17. Experimental study of the thermal conductivity of metal oxide co-doped Yttria stabilized zirconia10.1016/j.mseb.2007.12.010 ↗
18. Defect clustering and nano-phase structure characterization of multicomponent rare-earth oxide doped zirconia-yttria thermal barrier coatings10.1002/9780470294802.ch75 ↗
19. Elaboration and characterization of bioceramic based on tricalcium phosphate and zirconia
20. Sintering and mechanical properties of the alumina-tricalcium phosphate-titania composites10.1016/j.msec.2014.03.036 ↗
21. International Center for Diffraction Data, PCPDFWIN-JCPDS-ICDD, 1995.
22. Nanoporous silver cathodes surface treated by atomic layer deposition of Y: ZrO2 for high performance low temperature solid oxide fuel cells10.1016/j.jpowsour.2015.06.136 ↗
23. Composite cathode based on yttria stabilized bismuth oxide for low temperature solid oxide fuel cells10.1063/1.1542933 ↗
24. Preparation and conductivity of Yb2O3-Y2O3 and Gd2O3-Y2O3 co-doped zirconia ceramics10.1016/j.ssi.2008.03.003 ↗
25. Phase stability, sintering and thermal conductivity of plasma-sprayed ZrO2-Gd2O3 compositions for potential thermal barrier coating applications10.1016/j.actamat.2005.11.033 ↗
26. Quantitative phase analysis in tetragonal-rich tetragonal/monoclinic two phase zirconia by Raman spectroscopy10.1023/A:1018587821260 ↗
27. Zone center phonon frequencies in tetragonal zirconia: lattice dynamical study and new assignment proposition10.1016/S0022-3697(00)00243-2 ↗
28. Ionic conductivity and its temperature dependence of atmospheric plasma-sprayed yttria stabilized zirconia electrolyte10.1016/j.mseb.2006.10.005 ↗
29. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
30. Effects of TiO2 addition on the sintering of ZrO2-TiO2 compositions and on the retention of the tetragonal phase of zirconia at room temperature10.1007/BF01143229 ↗
31. Effect of TiO2 addition on microstructure of zirconia / alumina sintered ceramics10.1016/j.ceramint.2017.05.074 ↗
32. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
33. Evaluation of commercial zirconia powders for solid oxide fuel cells10.1016/0167-2738(94)90263-1 ↗
34. Electrical conductivity of the ZrO2–Ln2O3 (Ln=lanthanides) system10.1016/S0167-2738(98)00540-2 ↗
35. Processing and characterization of ultra-thin yttria stabilized zirconia (YSZ) electrolytic films for SOFC10.1016/j.ssi.2005.10.010 ↗
36. Solid oxide fuel cells with electrolytes prepared via spray pyrolysis10.1016/j.ssi.2003.11.011 ↗