journal article·2026-09

A ZrO2-PSU composite membrane reactor for simultaneous Cl2 and H2/NaOH production via chlor-alkali electrolysis

Tao Zhang, Yugang Zhou, Wei Fang

Publisher page

Abstract

The chlor-alkali process is a vital industrial route for the production of chlorine (Cl2), hydrogen (H2), and sodium hydroxide (NaOH). However, conventional ion-exchange membrane-based technologies face challenges related to high cost, limited durability, and susceptibility to fouling and degradation under harsh operating conditions. Here, we report a zirconium dioxide-polysulfone (ZrO2-PSU) composite membrane reactor that enables simultaneous and efficient Cl2 and H2/NaOH production via chlor-alkali electrolysis. The composite membrane, fabricated via phase inversion tape casting, integrates ZrO2 nanoparticles into a porous PSU matrix, achieving a well-defined asymmetric structure with a dense top layer and a finger-like porous bottom layer. The optimized composite membrane (Z-PSU-70) exhibits lowest area resistance, enhanced hydrophilicity, and effective gas barrier properties. In an H-type electrolysis cell using a nickel mesh cathode and a RuO2@carbon paper anode, the reactor delivers stable cell voltages and high Faradaic efficiencies (>96% for H2 and >98% for Cl2) with minimal gas crossover. Furthermore, a zero-gap flow cell configuration achieves a low cell voltage of approximately 3.33 V at 100 mA cm-2, with stable performance over 20 hours. Post-electrolysis characterizations confirm the structural and chemical stability of both the membrane and electrodes. This work presents a cost-effective and high-performance membrane reactor design, offering a promising pathway toward more sustainable and efficient chlor-alkali electrolysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Direct electrosynthesis of sodium hydroxide and hydrochloric acid from brine streams10.1038/s41929-018-0218-y ↗
2. A clean and membrane-free chlor-alkali process with decoupled Cl2 and H2/NaOH production10.1038/s41467-018-02877-x ↗
3. Sodium hydroxide production from sodium carbonate and bicarbonate solutions using membrane electrolysis: a feasibility study10.1016/j.seppur.2014.02.020 ↗
4. Simultaneous sodium hydroxide production by membrane electrolysis and carbon dioxide capture10.1002/ceat.201700151 ↗
5. Membrane distillation and membrane electrolysis of coal seam gas reverse osmosis brine for clean water extraction and NaOH production10.1016/j.desal.2016.06.024 ↗
6. Sodium hydroxide production from seawater desalination brine: process design and energy efficiency10.1021/acs.est.8b01195 ↗
7. Comparative analysis of hydrogen generation performance using different membrane types in a chlor-alkali electrolyzer10.1016/j.ijhydene.2026.154444 ↗
8. Non-asbestos diaphragm in chlorine-alkali electrolysis10.1002/1521-4125(200202)25:2<167::AID-CEAT167>3.0.CO;2-0 ↗
9. The chlor-alkali process: work in Progress10.1007/s10098-013-0630-6 ↗
10. Beyond conventional chlor-alkali: the anion-exchange membrane breakthrough10.1002/aic.70037 ↗
11. A systematic performance history analysis of a Chlor-alkali membrane Electrolyser under industrial operating conditions10.3390/app9020284 ↗
12. Ultra-bubble-repellent sodium perfluorosulfonic acid membrane with a mussel-inspired intermediate layer for high-efficiency chlor-alkali electrolysis10.1016/j.memsci.2021.120181 ↗
13. A critical review of produced water management using the Chlor-alkali process: challenges and future prospects10.1002/wer.70124 ↗
14. The chlor-alkali process: a review of history and pollution10.1080/15275922.2016.1177755 ↗
15. SWRO brine reuse by diaphragm-type chlor-alkali electrolysis to produce alkali-activated slag10.1016/j.desal.2017.02.019 ↗
16. Separators and membranes for advanced alkaline water electrolysis10.1021/acs.chemrev.3c00694 ↗
17. Environmental challenges of the chlor-alkali production: seeking answers from a life cycle approach10.1016/j.scitotenv.2016.10.202 ↗
18. A porous skeleton-supported organic/inorganic composite membrane for high-efficiency alkaline water electrolysis10.1002/adfm.202309871 ↗
19. LDH-blended ZrO2/Polysulfone composite membrane for alkaline water electrolysis10.1021/acssuschemeng.5c00182 ↗
20. High-performance composite membranes: embedding Yttria-stabilized zirconia in Polyphenylene sulfide fabric for enhanced alkaline water electrolysis efficiency
21. Composite polymers development and application for polymer electrolyte membrane technologies-a review10.3390/molecules25071712 ↗
22. Synergistic membrane-electrode engineering for high-performance alkaline water electrolysis10.1016/j.ces.2025.121889 ↗
23. Pt modified Ni-PES membrane for simultaneous hydrogen production and separation via alkaline water electrolysis10.1016/j.memsci.2026.125169 ↗
24. Atomically dispersed dinuclear iridium active sites for efficient and stable electrocatalytic chlorine evolution reaction10.1039/D4SC01220H ↗
25. Highly concentrated HCl and NaOH from brines using electrodialysis with bipolar membranes
26. Polysulfone and zirconia composite separators for alkaline water electrolysis10.1007/s11705-013-1331-8 ↗
27. The synthesis of a Zirfon-type porous separator with reduced gas crossover for alkaline electrolyzer10.1002/er.5038 ↗