journal article·2026-05Open access

Effects of pin-to-plate plasma on the TENG properties of electrospun PCL-Ag/PA6,6 core-sheath yarns

Ryan Walden, Syamini Jayadevan, Akshaya Kumar Aliyana, Irthasa Aazem, Tatiana Perova, Steven Hinder, George K. Stylios, Suresh C. Pillai

Abstract

As the demand for self-powered wearable electronics and smart textiles accelerates, the development of high-performance, flexible, lightweight, energy harvesting materials with optimized electroactive surface properties has become a critical focus. Electrospun nanofibrous yarns became a promising candidate for such applications due to their high surface area-to-volume ratio and inherent flexibility. However, their surface chemistry and morphology often limit charge generation and transfer efficiency. For more efficient and responsive energy harvesting materials, surface modification of electrospun fibers is critical. Plasma treatment offers a solvent-free, tuneable, and scalable approach to modifying surface functionalities with nanoscale precision without compromising the bulk integrity of the fibers. In this study, we present a novel TENG architecture based on electrospun polycaprolactone (PCL)-Ag/polyamide 6,6 (PA6,6) core-sheath yarns, with property enhanced through a pin-to-plate plasma (PTP) surface treatment applied for the first time to this material system. A modified funnel-based electrospinning technique (NanoTwist Spinning) was employed to fabricate core-sheath yarns, in which a conductive Ag/PA6,6 core was encapsulated within a dielectric sheath of PCL fibers. These yarns were subsequently plasma-treated systematically investigate the TENG performance varying voltage parameters and treatment time. Comprehensive surface characterisation via FE-SEM, Raman, ATR-FTIR, and XPS revealed increased surface roughness, oxidation, and polymer crystallinity with longer plasma exposure. This nanoscale modifications directly translated to improved TENG performance, with the PTP-15 sample achieving a peak output of 113.6 V at a force of frequency of 10 Hz and a force of 20 N, a substantial enhancement over untreated samples (65.9 V). Plasma treatments can also have a noticeable impact on current measurements depending on treatment times. The findings demonstrate the effectiveness of plasma treatment in optimising the electrospun nanofiber materials for next-generation energy harvesting fabrics demonstrated by the lighting of LEDs. Beyond TENG applications, this approach opens new avenues for scalable, flexible, and eco-friendly power sources in wearable electronics and smart textile systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Flame-retardant textile based triboelectric nanogenerators for energy harvesting and high-temperature sensing10.1016/j.nanoen.2024.110210 ↗
2. High-performance all-textile triboelectric nanogenerator toward intelligent sports sensing and biomechanical energy harvesting10.1021/acsami.3c18558 ↗
3. Strong, flexible and robust aramid nanofibers-based textile-triboelectric nanogenerators for high temperature escape monitoring and multifunctional applications10.1016/j.nanoen.2024.109359 ↗
4. Recent Progress of functional Fiber and textile triboelectric nanogenerators: towards electricity power generation and intelligent sensing10.1007/s42765-021-00077-9 ↗
5. Recent advances in fabricating high-performance triboelectric nanogenerators via modulating surface charge density
6. Triboelectric nanogenerator/supercapacitor in-one self-powered textile based on PTFE yarn wrapped PDMS/MnO2NW hybrid elastomer10.1016/j.nanoen.2021.105918 ↗
7. Extraordinary-durable cylindrical rotary triboelectric nanogenerator based on CB/Fe3O4/PDMS microarrays for energy harvester10.1016/j.nanoen.2024.109609 ↗
8. PEDOT-molecular bridging foam-hydrogel based wearable triboelectric nanogenerator for energy harvesting and sensing10.1016/j.nanoen.2024.110572 ↗
9. All-textile 3D triboelectric nanogenerator derived from bidirectional cross-weaving binary-yarns for bio-motion energy harvesting and sensing10.1016/j.cej.2024.158871 ↗
10. High-performance triboelectric nanogenerator based on biocompatible electrospun polycaprolactone nanofiber and counter convex PDMS for low-frequency mechanical energy harvesting10.1007/s00396-024-05307-1 ↗
11. Solid–liquid contact TENG using a melting near-field direct writing PCL nano-fiber structure10.1080/19475411.2023.2168782 ↗
12. All-hydrogel yarn-based supercapacitor wrapped with multifunctional cotton fiber for energy storage and sensing10.1016/j.nanoen.2024.110142 ↗
13. Integrating all-yarn-based triboelectric nanogenerator/supercapacitor for energy harvesting, storage and sensing10.1016/j.cej.2024.154358 ↗
14. Hybrid tribo/piezoelectric nanogenerator textile derived from 3D interlocked parallel-arranged yarns for bio-motion energy harvesting and tactile sensing10.1016/j.cej.2023.145866 ↗
15. Multiple textile triboelectric nanogenerators based on UV-protective, radiative cooling, and antibacterial composite yarns10.1016/j.cej.2023.143800 ↗
16. Nonthermal plasma technologies for advanced functional material processing and current applications: opportunities and challenges10.1016/j.jece.2024.113541 ↗
17. Chemically surface-engineered polydimethylsiloxane layer via plasma treatment for advancing textile-based triboelectric nanogenerators10.1016/j.nanoen.2018.12.051 ↗
18. Cold atmospheric pressure plasma treatment for adhesion improvement on polypropylene surfaces10.1016/j.surfcoat.2020.126389 ↗
19. Surface modification of electrospun polycaprolactone microfibers by air plasma treatment: effect of plasma power and treatment time10.1016/j.eurpolymj.2016.09.060 ↗
20. Barrier discharges in science and technology since 2003: a tribute and update10.1007/s11090-023-10364-5 ↗
21. A review on the Progress in Core-spun yarns (CSYs) based textile TENGs for real-time energy generation, capture and sensing10.1002/advs.202304232 ↗
22. Continuous fabrication of a highly integrated, user-friendly, and low-cost triboelectric yarn/fabric for diverse sensing applications10.1021/acssuschemeng.3c03309 ↗
23. Continuous fabrication of core-sheath fiber for strain sensing and self-powered application10.1016/j.nanoen.2023.108950 ↗
24. Electro–centrifugal spinning of core–sheath composite yarns with micro/nano structures for self–powered sensing10.1016/j.coco.2024.102141 ↗
25. Scalable core–spun coating yarn-based triboelectric nanogenerators with hierarchical structure for wearable energy harvesting and sensing via continuous manufacturing10.1016/j.nanoen.2021.106672 ↗
26. Scalable fabrication of core–sheath nanofiber yarns via NanoTwist spinning for high-performance energy-harvesting E-nanofiber fabrics10.1021/acsami.5c04482 ↗
27. Electroactive phase dependent triboelectric nanogenerator performance of PVDF–TiO 2 composites. Energy
28. Raman structural analysis of L-lactide/ε-caprolactone copolymers and poly(L-lactide)/poly(ε-caprolactone) blends10.1016/j.saa.2025.126018 ↗
29. Antimicrobial electrospun poly(ε-caprolactone) scaffolds for gingival fibroblast growth10.1039/C6RA02486F ↗
30. The application of Fourier transform Raman spectroscopy to the identification and characterisation of polyamides—II. Double-number nylons10.1016/0584-8539(91)80223-6 ↗
31. FTIR study of polycaprolactone chain organization at interfaces10.1016/j.jcis.2004.02.001 ↗
32. Functionalization of PET and PA6.6 woven fabrics10.1016/j.apsusc.2011.04.002 ↗
33. Local contact formation during sliding on soft adhesive surfaces with complex microstructuring10.1016/j.triboint.2021.107180 ↗
34. Visualization and standardized quantification of surface charge density for triboelectric materials10.1038/s41467-024-49660-9 ↗
35. Kim, J.; Yoo, J.; Seo, H.; Avila, R.; Chung, G.; Shin, G.; Gwak, S.; Han, Y.; Lee, J.-H.; Yoon, H.-J.; et al. Magnetically driven triboelectric nanogenerator for a wireless, versatile energy transfer system. Sci. Adv. 11 (17), eadu5919. DOI:https://doi.org/10.1126/sciadv.adu5919.10.1126/sciadv.adu5919 ↗
36. Influence of relative humidity and temperature on the performance of knitted textile triboelectric nanogenerator10.1021/acsaelm.3c01442 ↗
37. Enhancement of output charge density of TENG in high humidity by water molecules induced self-polarization effect on dielectric polymers10.1016/j.nanoen.2022.107916 ↗
38. Humidity-resistant triboelectric energy harvester using electrospun PVDF/PU nanofibers for flexibility and air permeability10.1088/1361-6528/ab0cd5 ↗