journal article·2026-02

Nanostructured boron-aluminum-silicon (BAlSi) thin films: Synthesis via sol-gel and evaluation of antimicrobial efficacy

Gökhan Gurur Gökmen, Yogendra Kumar Mishra, Tamer Akan, Duygu Kışla

Publisher page

Abstract

In this study, boron oxide–aluminum oxide–silicon (BAlSi) nanoparticles (NPs) and thin films were synthesized via the sol–gel method and spin coating technique. The thin films (S1 and S2) were fabricated using two approaches: coating with the sol form of boron oxide–aluminum oxide–silicon precursors (BAlSi-1 NPs) and applying a 1% (w/v) solution of BAlSi nano powder dispersed in 70% (v/v) ethanol (BAlSi-2 NPs). The physicochemical properties of the synthesized BAlSi NPs and thin films were characterized using various characterization techniques. The antimicrobial activity of the NPs and thin films was assessed against Staphylococcus aureus ATCC6538P, Escherichia coli DSM1103, Pseudomonas sp. and Exiguobacterium sp. using 96-well microplate broth dilution method, direct contact test and modified Kirby–Bauer test. X-ray diffraction (XRD) analysis confirmed that the synthesized BAlSi NPs exhibited crystalline structures, corresponding to the (111), (012), (110), and (−223) crystallographic planes, with respective crystallite sizes of 13.4 nm, 40.4 nm, and 39.0 nm. In contrast, both S1 and S2 thin films were found to be amorphous. Scanning electron microscopy (SEM) imaging revealed that the BAlSi NPs possessed a spherical morphology, while the thin films exhibited a uniform nanoscale structure. Water contact angle (WCA) measurements indicated that the S1 and S2 films exhibited hydrophilic properties, with values of 25.46° and 11.32°, respectively. Antimicrobial efficacy testing demonstrated that the BAlSi-1 sol samples exhibited MIC and MBC values in the range of 0.78–3.13% (v/v), while BAlSi-2 nano powder suspensions showed MIC/MBC values between 12.5 and 50 mg/mL against the tested strains. The inhibition zones for the thin films ranged between 1.50 mm and 2.50 mm, while both films exhibited over 90% microbial inhibition in direct contact tests following a two-hour exposure period.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Boron and Carbon Nanomaterials Research · Silicon Nanostructures and Photoluminescence · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Environmental impact of nanoparticles' application as an emerging technology: A review10.3390/ma14010166 ↗
2. Sputtering physical vapour deposition (PVD) coatings: A critical review on process improvement and market trend demands10.3390/coatings8110402 ↗
3. Antimicrobial nanoparticles: applications and mechanisms of action10.4038/sljid.v8i1.8167 ↗
4. Synthesis of inorganic nanomaterials using carbohydrates
5. A review on antimicrobial properties of metal nanoparticles10.1166/jnn.2020.17677 ↗
6. Advances in emerging technologies for the decontamination of the food contact surfaces10.1016/j.foodres.2021.110865 ↗
7. Antibiotic resistome in the livestock and aquaculture industries: status and solutions10.1080/10643389.2020.1777815 ↗
8. Global trends in antimicrobial use in food animals10.1073/pnas.1503141112 ↗
9. Global trends in antimicrobial use in food animals from 2017 to 203010.3390/antibiotics9120918 ↗
10. Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure-activity relationship, and membrane-active mode of action10.1021/am507482y ↗
11. Integrated antimicrobial and antifouling ultrafiltration membrane by surface grafting PEO and N-chloramine functional groups10.1016/j.jcis.2017.04.028 ↗
12. Antimicrobial surfaces10.1007/12_2010_101 ↗
13. Nanoporous anodic alumina reduces Staphylococcus biofilm formation10.1111/lam.13201 ↗
14. Bacterial attachment and biofilm formation on surfaces are reduced by small-diameter nanoscale pores: how small is small enough?10.1038/npjbiofilms.2015.22 ↗
15. Alumina surfaces with nanoscale topography reduce attachment and biofilm formation by Escherichia coli and Listeria spp10.1080/08927014.2014.976561 ↗
16. Antibacterial coatings: challenges, perspectives, and opportunities10.1016/j.tibtech.2015.09.002 ↗
17. Natural bactericidal surfaces: mechanical rupture of Pseudomonas aeruginosa cells by Cicada wings10.1002/smll.201200528 ↗
18. A review of the biomaterials technologies for infection-resistant surfaces10.1016/j.biomaterials.2013.07.089 ↗
19. The antimicrobial activity of nanoparticles: present situation and prospects for the future10.2147/IJN.S121956 ↗
20. Antifungal mechanisms supporting boric acid therapy of Candida vaginitis10.1093/jac/dkn486 ↗
21. Inhibitory effect of boron against Botrytis cinerea on table grapes and its possible mechanisms of action10.1016/j.ijfoodmicro.2009.12.018 ↗
22. Effects of hexagonal boron nitride nanoparticles on antimicrobial and antibiofilm activities, cell viability10.1016/j.msec.2018.05.028 ↗
23. Antibacterial activity of boron compounds against biofilm-forming pathogens10.1007/s12011-023-03768-z ↗
24. Effects of hafnium and boron on antibacterial and mechanical properties of polyvinylpyrrolidone-based nanofibrous composites10.1007/s00289-021-03627-8 ↗
25. An “all in one” strategy to boost antibacterial phototherapy via porphyrin and boron dipyrromethenes based covalent organic framework10.1016/j.cej.2022.141017 ↗
26. Stimulatory effect of hexagonal boron nitrides in wound healing10.1021/acsabm.9b00669 ↗
27. Boron in wound healing: a comprehensive investigation of its diverse mechanisms10.3389/fbioe.2024.1475584 ↗
28. Antimicrobial sensitivity of Escherichia coli to alumina nanoparticles10.1016/j.nano.2009.01.002 ↗
29. Interactions of aluminum nanoparticles with human epidermal keratinocytes10.1002/jat.1494 ↗
30. Assessment of the cytotoxicity of aluminium oxide nanoparticles on selected mammalian cells10.1016/j.tiv.2011.07.010 ↗
31. Ordered arrays of 〈100〉-oriented silicon nanorods by CMOS-compatible block copolymer lithography10.1021/nl070275d ↗
32. Silicon nanowires: a review on aspects of their growth and their electrical properties10.1002/adma.200803754 ↗
33. Ultrafine titanium dioxide particles in the absence of photoactivation can induce oxidative damage to human bronchial epithelial cells10.1016/j.tox.2005.05.007 ↗
34. Cytotoxicity and oxidative DNA damage by nanoparticles in human intestinal Caco-2 cells10.3109/17435390903276933 ↗
35. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
36. Zimmer · CLSI · 2024 · M07
37. Surface antimicrobial activity and biocompatibility of incorporated polyethylenimine nanoparticles10.1016/j.biomaterials.2008.07.003 ↗
38. The effect of aluminum on the microstructure and phase composition of boron carbide infiltrated with silicon10.1016/j.matchemphys.2009.08.023 ↗
39. Al-B-Si (Aluminum-Boron-Silicon)10.1007/s11669-007-9172-0 ↗
40. Synthesis of Al2O3-0.5B2O3-SiO2 fillers by sol-gel method for dental resin composites10.1016/j.jnoncrysol.2016.12.007 ↗
41. Comparative evaluation of dental resin composites based on micron- and submicron-sized monomodal glass filler particles10.1016/j.dental.2013.09.006 ↗
42. Synthesis and study of properties of dental resin composites with different nanosilica particles size10.1016/j.dental.2011.04.008 ↗
43. Effect of viscosity on the production of alumina borate nanofibers via electrospinning
44. Characterization and photoluminescence properties of aluminum borate nanorods doped with Eu10.1063/1.2234240 ↗
45. Coating aluminum borate (Al18B4O33) nanowire webs with BN10.1021/jp067393u ↗
46. Characterization of Al18B4O33 ceramic synthesized by the sol-gel, precipitation, and combustion methods10.1111/ijac.13479 ↗
47. FTIR coupled with machine learning to unveil spectroscopic benchmarks in the Italian EVOO10.1111/ijfs.15735 ↗
48. Carpathian journal of food science and technology synthesis and characterization of graft copolymers of native and phthalated cassava (Manihot esculenta) starches with acrylonitrile as a grafting agent, Carpathian
49. Coordination chemistry of Ca2+ sites in CaX zeolite: FTIR evidence of three coordination vacancies per cation10.1016/j.micromeso.2023.112768 ↗
50. Fabrication of a low-cost humidity sensor using polypyrrole composites containing Li2O and ZnO nanoparticles10.1007/s11696-023-03240-1 ↗
51. The influence of alkali metal ions in the chemisorption of CO and CO2on supported palladium catalysts: a Fourier transform infrared spectroscopic study10.1006/jcat.1996.0388 ↗
52. Comparative study of the optical and textural properties of tetrapyrrole macrocycles trapped within ZrO2, TiO2, and SiO2 translucent xerogels10.3390/molecules201019463 ↗
53. J.C. Steinbach, M. Schneider, O. Hauler, G. Lorenz, K. Rebner, A. Kandelbauer, A Process analytical concept for in-line FTIR monitoring of polysiloxane formation, Polymers12 (2020) 2473. doi:https://doi.org/10.3390/POLYM12112473.10.3390/polym12112473 ↗
54. Structural characterization of silica and amino-silica nanoparticles by Fourier transform infrared (FTIR) and Raman spectroscopy10.1080/00032719.2022.2083144 ↗
55. FTIR and XPS studies of bioactive silica based glasses10.1016/j.jnoncrysol.2003.09.013 ↗
56. FTIR spectroscopy study of the structure changes of palygorskite under heating10.1016/j.saa.2012.07.085 ↗
57. Comparing amorphous silica, short-range-ordered silicates and silicic acid species by FTIR10.1038/s41598-022-15882-4 ↗
58. IR spectral similarity studies of geothermal silica-bentonite based geopolymer10.1063/1.5003498 ↗
59. FTIR as a tool to study high-temperature phase formation in sol–gel aluminium titanate10.1006/jssc.1997.7371 ↗
60. Chemistry and fundamentals of the sol–gel process
61. Fabrication of high-performance silicon anode materials for lithium-ion batteries by the impurity compensation doping method10.1007/s10008-023-05401-4 ↗
62. Incorporating quantum-sized boron dots into 3D cross-linked rGO skeleton to enable the activity of boron anode for favorable lithium storage10.1016/j.cej.2021.130659 ↗
63. Thermal stability of ultra thin Zr-B-N films as diffusion barrier between Cu and Si10.1016/j.apsusc.2020.146810 ↗
64. Green synthesis of boron-doped carbon dots from Chinese herbal residues for Fe3+ sensing, anti-counterfeiting, and photodegradation applications10.1016/j.jclepro.2023.138577 ↗
65. Efficient charge transfer in aluminum-cobalt layered double hydroxide derived from co-ZIF for enhanced catalytic degradation of tetracycline through peroxymonosulfate activation10.1016/j.cej.2019.122802 ↗
66. The chemisorption and reaction of BCl3 with Si(111)10.1063/1.352057 ↗
67. Doping and characterization of boron atoms in nanocrystalline silicon particles10.1063/1.3120768 ↗
68. Reaction of BCl3 with H- and cl-terminated Si(100) as a pathway for selective, monolayer doping through wet chemistry10.1016/j.apsusc.2020.146907 ↗
69. Facile and mild method to fabricate a flexible cellulose-based electrode with reduced graphene and amorphous cobalt–iron–boron alloy for wearable electronics10.1007/s10570-020-03269-5 ↗
70. Thermally conditioned aerospace-grade carbon fiber reinforced polyether ketone ketone composites: structure, impact response, and thermomechanical performance10.1002/pc.27261 ↗
71. XPS and two-dimensional FTIR correlation analysis on the binding characteristics of humic acid onto kaolinite surface10.1016/j.scitotenv.2020.138154 ↗
72. Starting from a fixed geometry: real-time XPS investigation of a surface reaction with controlled molecular configurations10.1021/acs.jpcc.0c07743 ↗
73. Synthetic fungal melanin nanoparticles with excellent antioxidative property10.1016/j.giant.2022.100120 ↗
74. Innovative multiwall carbon nanotubes synthesis on 3D nickel surface: a comparative study, fullerenes10.1080/1536383X.2024.2328239 ↗
75. Multifunctional urea in modification of SnO2 interface for high efficiency planar perovskite solar cells
76. Comprehensive studies of activity of Ni in inorganic sodium borosilicate glasses doped with nickel oxide10.1016/j.apsusc.2021.149891 ↗
77. X-ray photoelectron spectroscopy, structural, and radiation shielding properties for transparent borosilicate glasses10.1016/j.optmat.2024.115488 ↗
78. Constructing an orderly electron transport channel on boron regulated biomass carbon fiber for selective ROS generation and water decontamination10.1016/j.jhazmat.2023.132987 ↗
79. Beneficial role of the continuous powder oxide film in establishing chemical bonding at cold sprayed Al coating/PEEK substrate interface10.1016/j.apsusc.2022.154234 ↗
80. pH-dependent behavior of quartz surfaces: insights from XPS, DRIFT, and potentiometric titrations10.1021/acs.jpcb.5c04451 ↗
81. A methodology to reduce error sources in the determination of thin film chemical composition by EDAX10.1016/j.tsf.2003.10.073 ↗
82. SEM, EDX, AFM, and XPS analysis of surface microstructure and chemical composition of nanograting patterns on silicon substrates10.1007/s11082-025-08106-2 ↗
83. Tissue response to implanted polymers: the significance of sample shape10.1002/jbm.820100308 ↗
84. Designing photocatalytic nanostructured antibacterial surfaces: why is black silica better than black silicon?10.1021/acsami.0c02854 ↗
85. Mitigating ROS signalling pathway-mediated defence mechanism: a novel approach to counteract bacterial resistance using natural antioxidant-based antibiotics
86. BPEI-stabilized photocatalytic au/Titania nanoclusters with enhanced antimicrobial activity for wound healing applications10.2147/IJN.S520784 ↗
87. Antibacterial behavior of organosilicon composite with nano aluminum oxide without influencing animal cells10.1016/j.reactfunctpolym.2021.105143 ↗
88. Antimicrobial sol–gel coating: a review10.1007/s11998-024-01014-2 ↗
89. Reviewing and exploring boron oxide's role in bioactive glasses: a synthesis of modeling and applications10.1007/s41779-024-01103-w ↗
90. Aluminum induces neurodegeneration and its toxicity arises from increased iron accumulation and reactive oxygen species (ROS) production
91. Ion release, hydroxyapatite conversion, and cytotoxicity of boron-containing bioactive glass scaffolds10.1111/ijag.12206 ↗
92. Enhancing the antibacterial efficacy of aluminum foil by nanostructuring its surface using hot water treatment10.1088/1361-6528/abfd59 ↗
93. Functionalized boron nanoparticles as potential promising antimalarial agents10.1021/acsomega.1c05888 ↗
94. Uptake and molecular impact of aluminum-containing nanomaterials on human intestinal caco-2 cells10.1080/17435390.2018.1504999 ↗
95. Assessment of the cytotoxicity of cerium, tin, aluminum, and zinc oxide nanoparticles on human cells10.1007/s11051-020-05102-3 ↗
96. In vitro toxicity of silica nanoparticles in human lung cancer cells10.1016/j.taap.2006.10.004 ↗
97. Size-dependent cytotoxicity of monodisperse silica nanoparticles in human endothelial cells10.1002/smll.200800461 ↗
98. EU · 2020
99. WHO, Guidelines for drinking-water quality, 4th edition, incorporating the 1st addendum. Geneva, Switzerland, World Health Organization (2017). https://www.who.int/publications/i/item/9789241549950 (accessed October 17, 2025).
100. EPA · 2010