journal article·2026-02

Enhanced lithium storage of LiTi(HPO3)2 anode probed by in-situ X-ray diffraction and ex-situ X-ray photoelectron spectroscopy

Ikrame Taoufik, M'hamed Oubla, Wissal Tout, Abdelfettah Lallaoui, Mickael Mateos, Junxian Zhang, Fouzia Cherkaoui El Moursli, Zineb Edfouf

Publisher page

Abstract

In this study, the electrochemical behavior of LiTi(HPO3)2 is investigated through in situ XRD and ex-situ XPS. The results indicate that, in the first lithiation, LiTi(HPO3)2 undergoes an irreversible amorphization accompanied by a partial conversion reaction, with Ti3+/Ti2+ and P3+ as active redox centers. Besides, to enhance its performance, LiTi(HPO3)2 material was coated by rGO via a simple two-step hydrothermal method. Electrochemical evaluation revealed a notable improvement in capacity, cycling stability, and rate capability, with the optimized material delivering a reversible capacity of 450 mAh/g at 0.2C. This constitutes a pioneering advancement in the understanding of lithium storage mechanisms in lithium titanium phosphite-based anode materials, offering valuable insights into their electrochemical behavior and structural evolution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Synthesis and electrochemical properties of α-LiVOPO4 as cathode material for lithium-ion batteries10.1016/j.ceramint.2018.02.151 ↗
2. Mechanisms for Lithium insertion in carbonaceous materials10.1126/science.270.5236.590 ↗
3. G.-N. Zhu, H.-J. Liu, J.-H. Zhuang, C.-X. Wang, Y.-G. Wang, Y.-Y. Xia, Carbon-coated nano-sized Li4Ti5O12 nanoporous micro-sphere as anode material for high-rate lithium-ion batteries, Energy Environ. Sci., 2011, vol. 4, no 10, p. 4016–4022.DOIdoi:https://doi.org/10.1039/C1EE01680F DOIdoi:https://doi.org/10.1039/C1EE01680F.10.1039/c1ee01680f ↗
4. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
5. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
6. A square channel vanadium phosphite framework as a high voltage cathode for Li- and Na-ion batteries10.1039/D0MA00029A ↗
7. Optimization of LiFePO4 cathode material based on phosphorus doped graphite network structure for lithium ion batteries10.1007/s11581-018-2744-7 ↗
8. Li1+xAlxTi2−x (PO4)3, NASICON-type solid electrolyte fabrication with different methods10.1016/j.matpr.2019.12.279 ↗
9. Electrolyte additives for bulk-type all-oxide solid-state lithium-ion batteries10.1016/j.est.2024.114592 ↗
10. Mesoporous LiTi2(PO4)3/C composite with trace amount of carbon as high-performance electrode materials for lithium ion batteries10.1016/j.jallcom.2018.03.333 ↗
11. In-situ one-step hydrothermal synthesis of LiTi2(PO4)3@rGO anode for high performance Lithium-ion batteries10.3390/ma18061329 ↗
12. Mn(HPO3): a new manganese (II) phosphite with a condensed structure10.1016/j.jssc.2005.06.038 ↗
13. Phosphite as polyanion-based cathode for Li-ion battery: Synthesis, structure, and electrochemistry of LiFe(HPO3)210.1021/acs.inorgchem.5b00900 ↗
14. A. Lallaoui, New Titanium (III) Phosphite Structure and its Application as Anode for lithium Ion Batteries, (n.d.).
15. Unraveling the energy storage mechanism in nanostructured SnHPO3 anode through advanced operando and ex-situ characterizations10.1016/j.est.2025.115502 ↗
16. Novel lithium titanium phosphite LiTi(HPO3)2 as low voltage anode material for lithium-ion batteries
17. Lithium batteries and cathode materials10.1021/cr020731c ↗
18. Effect of carbon coating on the structure and electrochemical properties of β-LiVOPO4 cathode material for lithium-ion batteries10.1016/j.ceramint.2024.11.244 ↗
19. Enhancing the performances of Li-ion batteries by carbon-coating: present and future10.1039/C1CC14764A ↗
20. Construction of TiP2O7 nanosheets/rGO hierarchical flower-like heterostructures for superfast and ultralong lithiation/delithiation process10.1016/j.apsusc.2020.145854 ↗
21. A. Lallaoui, Z. Edfouf, O. Benabdallah, S. Idrissi, M. Abd-Lefdil, F.C. El, Novel High-Performance Ti2(HPO3)3/Reduced Graphene Oxide Anode Composite Prepared by One-Step Hydrothermal Route, (n.d.).
22. Preparation of graphitic oxide10.1021/ja01539a017 ↗
23. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
24. An electrochemical cell for operando study of Lithium batteries using synchrotron radiation10.1149/1.3355977 ↗
25. Is small particle size more important than carbon coating? An example study on LiFePO4 cathodes10.1016/j.elecom.2007.09.020 ↗
26. Li1.43 [FeII4.43 FeIII0.57 (HPO3)6]·1.5H2O: A phosphite oxoanion-based compound with lithium exchange capability and spin-glass magnetic behavior10.1021/cm201337g ↗
27. Li2HPO3, H2O: crystal structure and IR spectrum10.1007/s10870-010-9690-1 ↗
28. Phosphite as polyanion-based cathode for Li-ion battery: Synthesis, structure, and electrochemistry of LiFe(HPO3)210.1021/acs.inorgchem.5b00900 ↗
29. Influence of graphene microstructures on electrochemical performance for supercapacitors10.1016/j.pnsc.2015.10.004 ↗
30. Low cost and green approach in the reduction of graphene oxide (GO) using palm oil leaves extract for potential in industrial applications10.1016/j.rinp.2020.102954 ↗
31. L. Sun, Y. Cai, K. Haider, D. Miyagi, C. Zhu, I.S. Kim, Structural design and optimization of metal-organic framework-derived FeO x @C/rGO anode materials for constructing high-performance hybrid supercapacitors, (n.d.).
32. The effect of graphene wrapping on the performance of LiFePO4 for a lithium ion battery10.1016/j.carbon.2013.01.070 ↗
33. Improved Li-ion diffusion process in TiO2/rGO anode for lithium-ion battery10.1016/j.jallcom.2017.08.121 ↗
34. Bubble-template-assisted synthesis of hollow fullerene-like MoS 2 nanocages as a lithium ion battery anode material10.1039/C5TA06869J ↗
35. Fe and co methylene diphosphonates as conversion materials for Li-ion batteries10.1016/j.jpowsour.2016.12.090 ↗
36. Phosphorus anionic redox activity revealed by operando P K-edge X-ray absorption spectroscopy on diphosphonate-based conversion materials in Li-ion batteries10.1039/C8CC01350K ↗
37. NASICON-type Mg0.5Ti2 (PO4)3 negative electrode material exhibits different electrochemical energy storage mechanisms in Na-ion and Li-ion batteries10.1021/acsami.6b14196 ↗
38. X-ray photoelectron spectroscopy investigations of carbon-coated Lix FePO4 materials10.1021/cm801995p ↗
39. Preparation and characterization of Li1+xAlyScx−yTi2−x(PO4)3 (x=0.3, y=0.1, 0.15, 0.2) ceramics10.1016/j.ssi.2010.11.029 ↗
40. Synthesis and characterization of Phosphated mesoporous titanium dioxide with high photocatalytic activity10.1021/cm0340781 ↗
41. XPS study of duplex stainless steel as a possible current collector in a Li-ion battery10.1016/j.electacta.2012.06.057 ↗
42. XPS and UPS studies on electronic structure of Li2O10.1016/S0022-3115(00)00251-8 ↗