Spectroelectrochemical properties and electrochemical stabilities of 3-layered 1-(2-aminophenyl) pyrrole derivative films
Source abstract
Abstract
The aim of this study was to determine the spectroelectrochemical properties and electrochemical stability of 3-layer polypyrrole containing films. Within the scope of the study, polypyrrole (PPy) was produced on ITO-coated PET via electrochemical synthesis, and a three-layer composite material was developed with 1-(2-aminophenyl) pyrrole (AP). In the first layer, PPy was synthesized on ITO-coated PET in the potential range of −1.0 and + 1.0 V at a scan rate of 100 mV/s in 1 M NaClO4/ACN supporting electrolyte solution. For the second layer, PPy-AP was produced from AP on the PPy film via electrochemical reaction. In the third layer, PPy was synthesized on this film (PPy-AP) by the same method, resulting in a PPy-AP-PPy film. Optical electronic transitions of these polymer films were determined by using UV–Vis spectroscopy. TEM analysis was performed for investigation their surface morphological properties. According to TEM analysis, PPy-AP and PPy-AP-PPy contained the spherical structures, with diameters of the spherical structures being higher in the PPy-AP-PPy. The primary objective in producing these polymer films was to investigate their spectroelectrochemical behaviors and electrochemical stabilities. According to the reached experimental studies, it was observed that the absorbance value increased depending on the applied potential range. This demonstrated that the 3-layered films were successfully synthesized via electrochemical polymerization on the ITO-coated PET surface. According to their current-time cyclic voltammograms, the coloring times of the PPy and PPy-AP-PPy films were found as 3 s. The absorbance change values (∆A) for the PPy, PPy-AP and PPy-AP-PPy films were calculated as 0.0812, 0.0021 and 0.0023, respectively. As a result, the produced films could be used as components in electronic devices with their absorbance changes depending on the potential, their response times to this change, and their electrochemical stability against potential/current depending on time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Electrochemical sensors and biosensors · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Organic mixed ionic electronic conductors10.1038/s41563-019-0435-z ↗
2. Mixed ionic-electronic transport in polymers10.1146/annurev-matsci-080619-101319 ↗
3. Conducting polymers for pseudocapacitive energy storage10.1021/acs.chemmater.6b01762 ↗
4. Solution processed PEDOT analogues in electrochemical supercapacitors10.1021/acsami.6b02434 ↗
5. Side-chain engineering for high-performance conjugated polymer batteries
6. Enhancing the ionic conductivity of poly(3,4-propylenedioxythiophenes) with oligoether side chains for use as conductive cathode binders in lithium-ion batteries10.1021/acs.chemmater.1c03971 ↗
7. PEDOT:PSS based bioelectronic devices for recording and modulation of electrophysiological and biochemical cell signals10.1002/adhm.202100061 ↗
8. A biohybrid synapse with neurotransmittermediated plasticity10.1038/s41563-020-0703-y ↗
9. Intrinsically stretchable electrode array enabled in vivo electrophysiological mapping of atrial fibrillation at cellular resolution10.1073/pnas.2000207117 ↗
10. Emerging electrochromic materials and devices for future displays10.1021/acs.chemrev.1c01055 ↗
11. Fusing electrochromic technology with other advanced technologies: a new roadmap for future development10.1016/j.mser.2019.100524 ↗
12. Recent advances in electrochromic materials and devices for camouflage applications10.1039/D3QM00121K ↗
13. Density of states engineering of n-doped conjugated polymers for high charge transport performances
14. Cross-linked polyaniline for production of long life aqueous iron|| organic batteries with electrochromic properties10.1038/s41467-023-38890-y ↗
15. Flatband λ-Ti3O5 towards extraordinary solar steam generation10.1038/s41586-023-06509-3 ↗
16. A new perspective to develop regiorandom polymer acceptors with high active layer ductility, excellent device stability, and high efficiency approaching 17%10.1002/cey2.267 ↗
17. Electrically driven organic laser using integrated OLED pumping10.1038/s41586-023-06488-5 ↗
18. Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cell10.1126/science.abo2757 ↗
19. Smart current collector for high-energy-density and high-contrast electrochromic supercapacitors toward intelligent and wearable power application10.1016/j.ensm.2022.10.042 ↗
20. Transiently delocalized states enhance hole mobility in organic molecular semiconductors10.1038/s41563-023-01664-4 ↗
21. A high-performance electrochromic polymer based on narrow-band-gap conducting (quasi)-metallic polypyrrole derivatives10.1016/j.xcrp.2025.102675 ↗
22. High-stability conducting polymer-based conformal electrodes for bio−/iono-electronics10.1016/j.mattod.2021.12.002 ↗
23. A high-performance electrochromic polymer based on narrow-band-gap conducting (quasi)-metallic polypyrrole derivatives, cell reports physical
24. Response surface modeling andoptimization of accelerated solvent extraction of four lignans fromfructus schisandrae10.3390/molecules17043618 ↗
25. Disruptive electrochromic materials: carbazole-based conjugated polymers10.1021/acsapm.4c03585 ↗
26. Developing electrochromic materials and devices for next-generation display technologies: a review10.1002/pat.70233 ↗
27. Mechano-tribo-electrochromic device: polypyrrole/poly (ethylene oxide)/2D-manganese oxide nanosheet hybrid nanofiber-based triboelectric nanogenerator and self-powered electrochromic device10.1021/acsaem.4c02789 ↗
28. Structure and electrochromic properties of polypyrrole films synthesized by AC electrochemical impedance spectroscopy under different amplitude
29. A complementary electrochromic device based on polyaniline-tethered polyhedral oligomeric silsesquioxane and tungsten oxide10.1016/j.solmat.2008.12.021 ↗
30. A highly transparent and stretchable electrolyte with photoetching patterning function for electrochromic energy storage application10.1016/j.jpowsour.2025.237143 ↗
31. Electrochemical polymer synthesis using thiophene and pyrrole/carbazole: their electrochemical behaviours and capacitor performance10.1016/j.jelechem.2024.118486 ↗
32. Breaking the controversy of the electropolymerization of pyrrole mechanisms by the effective screening medium quantum charged model interface
33. The mechanisms of pyrrole electropolymerization10.1039/a807124a ↗
34. Mechanism of electropolymerization of pyrrole in acidic aqueous solutions
35. The electrodeposition of polypyrrole films from aqueous solutions10.1016/0022-0728(84)80225-9 ↗
36. Electrochemically initiated chain polymerization of pyrrole in aqueous media10.1002/pola.1992.080300709 ↗
37. Diaz · 1982 · 3 · 417
38. Electrochemically prepared polypyrroles from aqueous solutions10.1295/polymj.19.157 ↗
39. The effects of electrolyte on electrical conductivity of electrochemically prepared polypyrrole and polythiophene films10.1016/0022-0728(89)87163-3 ↗
40. Polypyrrole conducting electroactive polymers: synthesis and stability studies
41. Synthesis and factor affecting on the conductivity of polypyrrole: a short review10.1002/pat.5201 ↗
42. Electropolymerization of pyrrole and electrochemical study of polypyrrole: 110.1016/S0013-4686(98)00293-X ↗
43. Efficiency of pyrrole electropolymerization under various conditions10.1134/S1023193518130190 ↗
44. Electrochemical polymerization of pyrrole in the presence of sulfoacid polyelectrolytes10.1134/S1023193519110065 ↗
45. Starter kit for electrochemical sensors based on polythiophene thin films—synthesis of high-quality films and protocol for fast and gentle electrode regeneration
46. Electrochemical copolymerization of aniline and o-aminophenol10.1016/j.synthmet.2003.12.008 ↗
47. Electrochemical synthesis of polypyrrole in ionic liquids10.1016/j.polymer.2004.01.006 ↗
48. The mechanism of lithium intercalation in graphite film electrodes in aprotic media. Part 1. High resolution slow scan rate cyclic voltammetric studies and modeling10.1016/S0022-0728(96)04832-2 ↗
49. Fast scan rate cyclic voltammetry for conducting polymers electropolymerized on ultramicroelectrodes10.1016/0022-0728(91)85211-7 ↗
50. Dependence of the estimated diffusion coefficient of LixWO3 films on the scan rate of cyclic voltammetry experiments10.1016/j.ssi.2006.12.019 ↗
51. Soluble narrow band gap and blue propylenedioxythiophene-cyanovinylene polymers as multifunctional materials for photovoltaic and electrochromic applications10.1021/ja061274a ↗
52. Development and optimization of UV-vis spectroscopy-a review
53. Spectroscopic diagnosis of excited-state aromaticity: capturing electronic structures and conformations upon aromaticity reversal10.1021/acs.accounts.7b00629 ↗
54. Recent advances in spectroelectrochemistry10.1039/C7NR07803J ↗
55. In situ UV–vis spectroelectrochemical study of dye doped nanostructure polypyrrole as electrochromic film10.1016/j.jelechem.2014.03.022 ↗
56. Band energies of nanoparticle semiconductor electrodes determined by spectroelectrochemical measurements of free electrons10.1039/C5CP01714A ↗
57. Pankove · 1975
58. Nb-doped colloidal TiO2 nanocrystals with tunable infrared absorption10.1021/cm402396c ↗
59. A UV-vis spectroelectrochemical study of redox reactions of solution species at a polyaniline electrode in the conducting and the reduced state10.1016/S0022-0728(98)00319-2 ↗
60. Long-term stability of nanostructured polypyrrole electrochromic devices by using deep eutectic solvents10.1016/j.jelechem.2017.11.026 ↗
61. Sizing ultracapacitors for hybrid electric vehicles
62. Handbook of clean energy systems
63. Electrochemical formation of Sn films on copper by overpotential and underpotential electrodeposition in deep eutectic solvents10.1016/j.jelechem.2023.117637 ↗
64. Growth process of atomically flat anodic films on titanium under potentiostatical electrochemical treatment in H2SO4 solution10.1016/j.susc.2007.04.211 ↗
65. Electrochromic properties of tetrabutylammonium perchlorate-doped polypyrrole/nanocellulose composite films10.1016/j.tsf.2025.140606 ↗
66. Four shades of brown: tuning of electrochromic polymer blends toward high-contrast eyewear10.1021/am507063d ↗
67. Preparation, characterization, and electrochromic properties of nanocellulose-based polyaniline nanocomposite films10.1021/acsami.7b02794 ↗
68. Limitations of dual and complementary inorganic–organic electrochromic device for smart window application and its colorimetric analysis10.1016/j.synthmet.2011.03.028 ↗
69. Both p- and n-type dopable polymer toward electrochromic applications10.1016/j.orgel.2008.02.009 ↗
70. Multi-colored electrochromic polymer with enhanced optical contrast10.1016/j.eurpolymj.2010.08.002 ↗
71. Fabrication of fast switching electrochromic window based on poly(3,4-(2,2- dimethylpropylenedioxy)thiophene) thin film10.1007/s10854-016-4527-0 ↗
72. Microstructured electrode materials in UV-visible spectroelectrochemistry10.1016/0022-0728(95)03824-Z ↗
73. Electrochemical synthesis and electrochromic application of a novel polymer based on carbazole10.1016/j.orgel.2015.06.004 ↗
74. Study on the electrochromic properties of polypyrrole layers doped with different dye molecules10.1016/j.jelechem.2021.115113 ↗
75. Fast switching ITO free electrochromic devices10.1002/adfm.201302320 ↗
76. Enhancing electrochromic properties of polypyrrole by silsesquioxane nanocages10.1016/j.polymer.2008.03.023 ↗
77. Morphological and electrochemical properties of PPy, PAni bilayer films and enhanced stability of their electrochromic devices (PPy/PAni–PEDOT, PAni/PPy–PEDOT)10.1016/j.electacta.2013.02.120 ↗
78. Electrochemical and optical properties of new electrochromic and fluorescent nitrobenzoyl polypyrrole derivatives10.1016/j.electacta.2014.01.070 ↗
79. Long-term stability of nanostructured polypyrrole electrochromic devices by using deep eutectic solvents10.1016/j.jelechem.2017.11.026 ↗
80. Synthesis of PPy/silica nanocomposites with cratered surfaces and their application in heavy metal extraction10.1016/j.jiec.2011.11.115 ↗
81. Preparation of hierarchical porous polypyrrole nanoclusters and their application for removal of Cr (VI) ions in aqueous solution10.1039/c1py00311a ↗
82. New approach to prepare cytocompatible 3D scaffolds via the combination of sodium hyaluronate and colloidal particles of conductive polymers10.1038/s41598-022-11678-8 ↗
83. Tuning the conductivity, morphology, and capacitance with enhanced antibacterial properties of polypyrrole by acriflavine hydrochloride10.1021/acsapm.1c00775 ↗
84. Preparation and characterization of conductive nanostructured particles based on polyaniline and cellulose nanofibers10.1016/j.ultsonch.2014.03.012 ↗
85. Polymerization model for hydrogen peroxide initiated synthesis of polypyrrole nanoparticles10.1021/la201962a ↗
86. Enzyme mediated synthesis of polypyrrole in the presence of chondroitin sulfate and redox mediators of natural origin10.1016/j.msec.2016.03.042 ↗
87. Enzymatic synthesis of biocompatible polypyrrole with enhanced electrochemical properties for supercapacitors10.1016/j.jpowsour.2024.234599 ↗