journal article·2026-01

Fabrication, antioxidant, and optical properties of Poly(ε-caprolactone)/metal oxide fibers by electroblowing

Azra Huner, Esma Sezer

Publisher page

Abstract

The properties of nanofibers (NFs), such as their aspect ratio, tensile strength, porosity, and the ability to combine organic–inorganic materials, make them important in biomedical applications, electronics, and optics. Several methods for the production of these NFs are still being developed, and electroblowing is one such method. This method allows for high yields in very short times, while also saving energy through the use of airflow. By utilizing the advantages of this method, metal oxide nanoparticle ()NFs will have the potential to be used in many applications, stimulating the production of new materials. In this study, poly(ε-caprolactone)(PCL)/MeONP NFs were produced via electroblowing using PCL obtained by deposition, along with copper oxide (CuO), iron oxide (FeOx), and manganese oxide (MnO) NPs. These fibers were characterized by FTIR, UV–Vis spectroscopy, XRD, TGA, DTG, DMA, SEM, and EDS analyses. These PCL/MeONP NFs were observed to have antioxidant properties by the 2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assay, and the highest antioxidant activity of 54.32 μg TE/mg was obtained from PCL/CuO NFs. The estimated optical band gap of these nanofibers was calculated to be 2.41–2.82 eV. PCL and MeONPs are widely used as biomaterials, and the electroblown PCL/MeONP NFs presented for the first time in this study have the potential to be used as biomaterials in many biomedical applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Metal oxides nanoparticles via sol–gel method: a review on synthesis, characterization and applications10.1007/s10854-020-02994-8 ↗
2. Effect of cobalt doping on antimicrobial, antioxidant and photocatalytic activities of CuO nanoparticles10.1016/j.mseb.2022.116258 ↗
3. H. Hayashi, Y. H.- Materials, and undefined 2010, Hydrothermal synthesis of metal oxide nanoparticles in supercritical water, mdpi.comH Hayashi, Y HakutaMaterials, (2010).10.3390/ma3073794 ↗
4. Chemical vapour deposition of gas sensitive metal oxides10.3390/chemosensors4010004 ↗
5. Wet chemical synthesis of metal oxide nanoparticles: a review10.1039/C8CE00487K ↗
6. L. Tsui and G. Zangari, Electrochemical synthesis of metal oxides for energy applications, (2014) 217–239, doi: 10.1007/978-1-4939-0289-7_4.10.1007/978-1-4939-0289-7_4 ↗
7. Utilizing fruit waste-mediated nanoparticles for sustainable food packaging materials to combat food loss and waste10.1016/j.fbio.2024.104151 ↗
8. p-Type and n-type Cu2O semiconductor thin films: Controllable preparation by simple solvothermal method and photoelectrochemical properties10.1016/j.electacta.2010.12.054 ↗
9. Copper(I)-based p-Type Oxides for Photoelectrochemical and Photovoltaic Solar Energy Conversion10.1021/acs.chemmater.6b00926 ↗
10. Recent Developments in p-Type Oxide Semiconductor Materials and Devices10.1002/adma.201503080 ↗
11. Synthesis, characterization, applications, and challenges of iron oxide nanoparticles10.2147/NSA.S99986 ↗
12. A review on iron oxide-based nanoarchitectures for biomedical, energy storage, and environmental applications10.1002/smtd.201800512 ↗
13. Effective removal of methylene blue using nanoscale manganese oxide rods and spheres derived from different precursors of manganese10.1016/j.jpcs.2021.110121 ↗
14. Simple direct fabrication of manganese oxide 3-D electrodes on Ni foam via thermal decomposition of manganese Formate-Amine ink for supercapacitors10.1016/j.mseb.2022.115962 ↗
15. Fabrication of a flexible binder-free lithium manganese oxide cathode for secondary Li - Ion batteries10.1016/j.jpcs.2019.109222 ↗
16. Effective thermoelectric properties with polyselenophene/CuxS composites10.1016/j.jpcs.2024.112207 ↗
17. ROMP-based boron nitride composites10.1002/app.45658 ↗
18. The potential of nanofibers and nanobiocides in water purification10.3109/10408410903397332 ↗
19. Iron oxide – poly(m-anthranilic acid)–poly(ε-caprolactone) electrospun composite nanofibers: fabrication and properties10.1039/D2ME00181K ↗
20. Corrosion performance of electrospinning nanofiber ZnO-NiO-CuO/polycaprolactone coated on mild steel in acid solution
21. A. Muñoz-Escobar, Á. de J. Ruíz-Baltazar, and S. Y. Reyes-López, Novel Route of Synthesis of PCL-CuONPs Composites With Antimicrobial Properties, Dose-Response 17 (2019) 1559325819869502, doi: 10.1177/1559325819869502.10.1177/1559325819869502 ↗
22. Review on functional electrospun nanofibers: Theory, application and fabrication10.1016/j.mseb.2024.117488 ↗
23. Graphene/ZnO/Poly[ε]caprolactone fibre nanocomposites for light and gas sensing applications10.1016/j.mseb.2025.118020 ↗
24. Tailoring of Gelatin-Chitosan Nanofibers Functionalized with Eucalyptus Essential Oil via Electroblowing for potential Food packaging and Wound Dressing applications10.1007/s12221-024-00592-7 ↗
25. Electro-blown spinning: New insight into the effect of electric field and airflow hybridized forces on the production yield and characteristics of nanofiber membranes
26. Novel electroblowing synthesis of tin dioxide and composite tin dioxide/silicon dioxide submicron fibers for cobalt(II) uptake10.1039/D1RA01559A ↗
27. Effect of air blowing on the morphology and nanofiber properties of blowing-assisted electrospun polycarbonates10.1002/app.35599 ↗
28. X. hai Zhou, L. Li, Z. huan Li, L. lan Fan, W. min Kang, and B. wen Cheng, The preparation of continuous CeO2/CuO/Al2O3 ultrafine fibers by electro-blowing spinning (EBS) and its photocatalytic activity, J. Mater. Sci. Mater. Electron. 28 (2017) 12580–12590, doi: 10.1007/S10854-017-7082-4/FIGURES/8.10.1007/s10854-017-7082-4 ↗
29. Performance comparison of PVDF-based unimodal and bimodal electret air filters via solution-blowing and electro-blowing methods10.1002/app.56855 ↗
30. Functional Bio-nanofibers for active packaging: electro-Blown Gelatin/Xanthan Gum with Carbon Dots10.1007/s12668-025-01929-z ↗
31. Innovative electroblown nanofibrous mats incorporating sage essential oil for extending shelf life of spreadable cheese10.1016/j.fbp.2025.02.002 ↗
32. Novel thermoelectric materials: free-standing poly(ε-caprolactone)/poly(m-anthranilic acid)/Fe2O3, Fe3O4 nanofibers10.1007/s11696-025-03962-4 ↗
33. Electrospun composite nanofibers and their multifaceted applications10.1039/c2jm30966a ↗
34. Synthesis of CuO nanoparticles by precipitation method using different precursors10.1016/j.egypro.2013.06.808 ↗
35. Characteristics and magnetic properties of chitosan-coated Fe3O4 nanoparticles prepared by ex-situ co-precipitation method
36. Poly(p-phenylenediamine)/X (X = zinc oxide, cerium oxide, manganese oxide) composites: synthesis, characterization, and electrochemical properties Iran
37. Fabrication of water-soluble polythiophene/poly (sulfonic acid diphenyl aniline)/polyethylene oxide electrospun nanofibers and their antioxidant activities10.1002/slct.202203166 ↗
38. CuO and Co3O4 nanoparticles: Synthesis, characterizations, and raman spectroscopy10.1155/2013/714853 ↗
39. Muntingia calabura leaves mediated green synthesis of CuO nanorods: exploiting phytochemicals for unique morphology10.3390/ma14216379 ↗
41. “Investigation on magnetic properties of α-Fe2O3 nanoparticles synthesized under surfactant-free condition by hydrothermal process10.1016/j.jallcom.2010.03.245 ↗
42. Simple and rapid synthesis of α-Fe2O3 nanowires under ambient conditions10.1007/s12274-009-9036-5 ↗
43. Hydrothermal-induced ɑ-Fe2O3/graphene nanocomposite with ultrahigh capacitance for stabilized and enhanced supercapacitor electrodes10.1007/s11581-019-02859-z ↗
44. Transition metal oxide electrode materials for supercapacitors: a review of recent developments10.3390/nano11051248 ↗
45. Hydrothermal synthesis of Fe2O3 nanoparticles and their electrochemical application10.1007/s10854-024-11971-4 ↗
46. Investigation of raman spectrum, structural, morphological, and optical features of Fe2O3 and Fe2O3/reduced graphene oxide hybrid nanocomposites10.1088/1402-4896/ac9c38 ↗
47. Raman and infrared spectromicroscopy of manganese oxides10.1016/j.jallcom.2008.10.056 ↗
48. Shell model lattice dynamics of transition metal oxides10.1016/S0022-3697(74)80137-X ↗
49. Fabrication, characterization and degradation of electrospun poly (ε-caprolactone) infused with selenium nanoparticles10.11113/mjfas.v17n3.2183 ↗
50. Structural and morphological characterization of micro and nanofibers produced by electrospinning and solution blow spinning: a comparative study10.1155/2013/409572 ↗
51. Experimental study of water-based CuO nanofluid flow in heat pipe solar collector10.1007/s10973-019-08046-6 ↗
52. Mesoporous silica mediated synthesis of α-Fe2O3 porous structures and their application as humidity sensors10.1007/s10854-018-0186-7 ↗
53. Re-examination of characteristic FTIR spectrum of secondary layer in bilayer oleic acid-coated Fe3O4 nanoparticles10.1016/j.apsusc.2009.11.079 ↗
54. Synthesis and characterization of chitosan-coated magnetite nanoparticles and their application in curcumin drug delivery10.1088/2043-6262/7/4/045010 ↗
55. Magnetic iron oxide nanoparticles modified with Moringa seed proteins for recovery of precious metal ions10.4236/jbnb.2019.102008 ↗
56. Synthesis of manganese oxide nanoparticles using co-precipitation method and its antimicrobial activity
57. Antimicrobial and nonlinear optical studies of copper oxide nanoparticles10.1007/s11664-021-08838-3 ↗
58. Light scattering and plasmonic response of Au–Fe3O4 nanoparticles10.1007/s42452-020-03646-6 ↗
59. Synthesis, characterizations of superparamagnetic Fe3O4-Ag hybrid nanoparticles and their application for highly effective bacteria inactivation10.1166/jnn.2016.11029 ↗
60. Systematic investigation of structural, morphological, thermal, optoelectronic, and magnetic properties of high-purity hematite/magnetite nanoparticles for optoelectronics10.3390/nano12101635 ↗
61. Influence of magnetoplasmonic γ-Fe2O3/Au core/shell nanoparticles on low-field nuclear magnetic resonance
62. Optimisation of green synthesis of MnO nanoparticles via utilising response surface methodology10.1049/iet-nbt.2017.0145 ↗
63. M. R. Johan, M. S. M. Suan, N. L. Hawari, and H. A. Ching, Annealing effects on the properties of copper oxide thin films prepared by chemical deposition, Int. J. Electrochem. Sci. 6 (2011) 6094–6104, Dec., doi: 10.1016/S1452-3981(23)19665-9.10.1016/S1452-3981(23)19665-9 ↗
64. Synthesis of ultra small iron oxide and doped iron oxide nanostructures and their antimicrobial activities10.1080/16583655.2019.1565437 ↗
65. The effect of temperature on structural and optical properties of manganese oxide nanoparticles
66. Optical and electrical transport properties of MnO nanoparticles10.1166/mat.2013.1078 ↗
67. Fast-dissolving electroactive drug delivery systems: Gelatin/Poly(sulphonic acid diphenyl aniline) electrospun nanofibers10.1016/j.fbio.2024.104924 ↗
68. Nanofibrillated chitosan/polycaprolactone bionanocomposite scaffold with improved tensile strength and cellular behavior
69. Structural, optical, magnetic and electrical properties of hematite (α-Fe2O3) nanoparticles synthesized by two methods: polyol and precipitation10.1007/s00339-017-1408-1 ↗
70. Lipase NS81006 immobilized on Fe 3 O 4 magnetic nanoparticles for biodiesel production10.1515/auoc-2016-0008 ↗
71. Urchin-like MnO/C microspheres as high-performance lithium-ion battery anode10.1007/s11581-021-03921-5 ↗
72. Synthesis of copper oxide nanoparticles by chemical and biogenic methods: photocatalytic degradation and in vitro antioxidant activity10.1007/s41204-020-00078-w ↗
73. Thermal stability, paramagnetic properties, morphology and antioxidant activity of iron oxide nanoparticles synthesized by chemical and green methods10.1016/j.inoche.2021.108572 ↗
74. Construction and characterization of 5, 6-O-Isopropylidene-L-ascorbic acid-loaded silver and manganese dioxide nanoparticles: cytotoxicity study, antibacterial, and antioxidant activities10.1016/j.matchemphys.2025.130517 ↗
75. In vitro cytotoxicity and antioxidant efficiency of synthesized mixed phase manganese oxide nanomaterial
76. Screening for antioxidant capacity, pollen types and phytochemical profile by GC/MS and UHPLC from propolis
77. Poly (ε‐caprolactone)/poly (m‐anthranilic acid) and poly (ε‐caprolactone)/poly(3, 4‐ethylenedioxythiophene)‐poly(styrenesulfonate) electrospun nanofibers: characterization, antioxidant, and electrochemical properties10.1002/pen.26233 ↗
78. Electrospun poly-ε-caprolactone nanofibers incorporating keratin hydrolysates as innovative antioxidant scaffolds10.3390/ph17081016 ↗