Investigation of optimized poly(lactic acid)/hydroxyapatite/doxycycline coatings on titanium alloy surfaces
Source abstract
Abstract
The main goal of this research was the preparation and optimization of porous coatings based on poly(lactic acid) (PLA) and poly(lactic acid)-hydroxyapatite (PLA_HA) containing doxycycline (Doxy), to achieve control and sustained Doxy release. The prepared coatings were investigated by different techniques (i.e., SEM-EDX, TG/DTG, contact angle, electrochemical and spectrophotometric methods). The optimization of the coatings prepared by the dip-coating technique focused on the parameters influencing the change in the average pore size and film thickness of the coatings. The results shows that the concentration of the polymer solution had the predominant effect. An increase in immersion time resulted in a decrease in coating thickness. The electrochemical investigation methods showed that the film porosity plays an important role in evaluating the corrosion resistance, as large pores favoured corrosion processes. Moreover, Doxy proved to be a potent inhibitor, both for PLA_D and PLA_HA_D coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Surface modification techniques of titanium and its alloys to functionally optimize their biomedical properties: Thematic review10.3389/fbioe.2020.603072 ↗
2. Investigating the corrosion performance of Ti-6Al-4V biomaterial alloy with hydroxyapatite coating by artificial neural network10.1016/j.mseb.2022.115644 ↗
3. Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants10.1016/j.actbio.2009.11.011 ↗
4. Biomedical alloys and physical surface modifications: A mini-review
5. Characterisation of titanium oxide film grown in 0.9% NaCl at different sweep rates10.1016/j.electacta.2005.05.051 ↗
6. Aseptic loosening of femoral components-Materials engineering and design considerations10.1016/j.matdes.2012.07.066 ↗
7. A. Rashidy Ahmady, A. Ekhlasi, A. Nouri, M. Haghbin Nazarpak, P. Gong, A. Solouk, High entropy alloy coatings for biomedical applications: A review, Smart Materials in Manufacturing, 1, 2023, 100009, https://doi.org/10.1016/j.smmf.2022.100009.10.1016/j.smmf.2022.100009 ↗
8. Recent advancements in materials and coatings for biomedical implants10.3390/gels8050323 ↗
9. Surface modification of Ti-based alloy by selective laser melting of Ni-based superalloy powder10.1016/j.jmrt.2020.06.016 ↗
10. Preparation, characterization, and biocompatibility of different metal oxide/PEG-based hybrid coating synthesized by sol-gel dip coating method for surface modification of titanium10.1016/j.porgcoat.2019.02.007 ↗
11. Surface modification of metallic bone implants-polymer and polymer-assisted coating for bone in-growth in fundamental biomaterials: Metals
12. Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy10.1016/j.colsurfa.2012.12.009 ↗
13. Biointerface coatings with structural and biochemical properties modifications of biomaterials
14. Dipcoating of poly (ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion protection10.1016/j.surfcoat.2014.02.048 ↗
15. Fly ash-, foundry sand-, clay-, and pumice-based metal oxide nanocomposites as green photocatalysts10.1039/D1RA05647F ↗
16. Highly ordered porous PLA films prepared by breath figure method10.55713/jmmm.v29i4.536 ↗
17. Hydroxyapatite-based coating on biomedical implant in Hydroxyapatite - advances in composite nanomaterials, biomedical applications and its technological facets, J. Thirumalai, Ed
18. Polymer coating technology for high performance applications: Fundamentals and advances10.1080/10601325.2018.1453266 ↗
19. Fabrication of porous polylactic acid films assisted by dip-coating and template leaching techniques10.1002/app.35277 ↗
20. Advances in multifunctional bioactive coatings for metallic bone implants10.3390/ma16010183 ↗
21. A simple approach to design fluorapatite glass-ceramic coatings on the surface modified Ti6Al4V substrates for biomedical applications10.1007/s41779-021-00574-5 ↗
22. A multifunctional zinc oxide/poly(Lactic Acid) nanocomposite layer coated on magnesium alloys for controlled degradation and antibacterial function10.1021/acsbiomaterials.8b00277 ↗
23. S. Mohammadzadeh, M. Ganjali, M. Alizadeh, M. Shahlaei, A. Sohrabi Jam, Synthesis and characterization of nHA-PLA composite coating on stainless steel 316Lby dip-coating process for biomedical applications, JITL, 2, 57-64, 2018, doi: 10.22051_JITF.2018.19010.1021.
24. Biodegradable polylactic acid and polylactic acid/hydroxyapatite coated iron foams for bone replacement materials10.20964/2017.12.53 ↗
25. Performance improvement and application of degradable poly-l-lactide and yttrium-doped zinc oxide hybrid films for energy harvesting10.1021/acsami.4c05807 ↗
26. Corrosion and mechanical behaviour of biodegradable PLA-cellulose nanocomposite coating on AZ31 magnesium alloy10.1080/02670844.2020.1776093 ↗
27. Effect of ZrO2on morphological and adhesion properties of hydroxyapatite reinforced poly- (lactic) acid matrix hybrid coatings on Mg substrates
28. Cellulose acetate/hydroxyapatite/chitosan coatings for improved corrosion resistance and bioactivity10.1016/j.msec.2015.01.020 ↗
29. Drug eluting titanium implants for localised drug delivery10.1557/s43578-022-00609-y ↗
30. Integration of 3% silver-doped hydroxyapatite coated on alumina using radio frequency magnetron sputtering for superior bioactivity, mechanical and electrical properties, and wear resistance10.1021/acsbiomaterials.4c02471 ↗
31. Improvement in bioactivity, hardness and friction resistance of 3 % manganese-doped hydroxyapatite coated on alumina using radio frequency magnetron sputtering
32. A review of techniques for the application of bioactive coatings on metal-based implants to achieve controlled release of active ingredients10.1016/j.matdes.2022.110653 ↗
33. Multilayered porous hydroxyapatite coating on Ti6Al4V implant with enhanced drug delivery and antimicrobial properties
34. Antibiotic containing poly lactic acid/hydroxyapatite biocomposite coatings for dental implant applications in key engineering materials
35. Development of antimicrobial composite coatings for drug release in dental, orthopaedic and neural prostheses applications10.1007/s42452-018-0064-1 ↗
36. Vancomycin–chitosan composite deposited on post porous hydroxyapatite coated Ti6Al4V implant for drug controlled release10.1016/j.msec.2013.01.038 ↗
37. Approaches based on passive and active antibacterial coating on titanium to achieve antibacterial activity10.1002/jbm.a.36413 ↗
38. MMPs-responsive release of DNA from electrospun nanofibrous matrix for local gene therapy: In vitro and in vivo evaluation10.1016/j.jconrel.2010.03.006 ↗
39. Nanofiber as a novel vehicle for transdermal delivery of therapeutic agents: challenges and opportunities
40. Biocompatibility, biodegradation and biomedical applications of poly(lactic acid)/poly(lactic-co-glycolic acid) micro and nanoparticles10.1007/s40005-019-00439-x ↗
41. Personalised 3D printed medicines: Which techniques and polymers are more successful?10.3390/bioengineering4040079 ↗
42. Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review10.1016/j.addr.2016.06.012 ↗
43. Degradable controlled-release polymers and polymeric nanoparticles: Mechanisms of controlling drug release10.1021/acs.chemrev.5b00346 ↗
44. Comparative study between two different morphological structures based on polylactic acid, nanocellulose and magnetite for co-delivery of flurouracil and curcumin10.1016/j.ijbiomac.2023.123315 ↗
45. Synthesis and evaluation of BSA-loaded PLGA-chitosan composite nanoparticles for the protein-based drug delivery system10.1021/acsomega.3c00738 ↗
46. Preparation and characterization of Doxycycline-loaded electrospun PLA/HAP nanofibers as a drug delivery system10.3390/ma15062105 ↗
47. Estradiol loaded PLGA nanoparticles for oral administration: Effect of polymer molecular weight and copolymer composition on release behavior in vitro and in vivo10.1016/j.jconrel.2007.01.016 ↗
48. R. Barabás, N.-I. Farkas, Cs. L. Nagy, O. Cadar, C. Moisa, L. Bizo, Adsorption and desorption behavior of natural and synthetic active compounds on hydroxyapatite-based nanocomposites, Ceramics International, 47, 6, 2021, 8584-8592, doi: 10.1016/j.ceramint.2020.11.226.10.1016/j.ceramint.2020.11.226 ↗
49. In vitro bioactivity of titanium implants coated with bicomponent hybrid biodegradable polymers10.1007/s10971-012-2912-6 ↗
50. A. Abdal-Hay, M. Dewidar, J. Lim, and J. K. Lim, Enhanced biocorrosion resistance of surface modified magnesium alloys using inorganic/organic composite layer for biomedical applications, Ceram. Int., 40, 1 Part B, 2237–2247, 2014, doi: 10.1016/j.ceramint.2013.07.142.10.1016/j.ceramint.2013.07.142 ↗
51. Optimization of process variables and corrosion properties of a multi layer silica sol gel coating on AZ91D using the Box-Behnken design10.1007/s10971-011-2539-z ↗
52. Box-Behnken design: An alternative for the optimization of analytical methods10.1016/j.aca.2007.07.011 ↗
53. Comparison of biodegradable poly(glycolide-ɛ-caprolactone) and poly(glycolide-ɛ-caprolactone-D,L-lactide) coatings enriched with ciprofloxacin formed on Ti6Al4V alloy10.1016/j.polymdegradstab.2018.07.013 ↗
54. Poly lactic acid (PLA) fibres: Different solvent systems and their effect on fibre morphology and diameter
55. Optimization and prediction of AZ91D stellite-6 coated magnesium alloy using Box Behnken design and hybrid deep belief network10.1016/j.jmrt.2021.09.069 ↗
56. 2018
57. Spontaneous formation of microporous poly(lactic acid) coatings10.1016/j.porgcoat.2018.09.016 ↗
58. Biodegradable Bi-layered coating on polymeric orthopaedic implants for controlled release of drugs10.1016/j.matlet.2014.06.070 ↗
59. Biodegradable hydrophilic film of crosslinked PVA/silk sericin for seed coating: The effect of crosslinker loading and polymer concentration10.1007/s10924-020-01867-9 ↗
60. The paracrine effect of cancer-associated fibroblast-induced interleukin-33 regulates the invasiveness of head and neck squamous cell carcinoma: CAF-induced IL-33 regulates HNSCC invasiveness10.1002/path.4226 ↗
61. Multi-objective optimization for alumina laser sintering process10.1007/s40516-016-0029-4 ↗
62. S. Buapool, N. Thavarungkul, N. Srisukhumbowornchai, and P. Termsuksawad, Modeling and analysis of the effect of dip-spin coating process parameters on coating thickness using factorial design method, Adv. Mater. Sci. Eng., 96393062017, doi: 10.1155/2017/9639306.10.1155/2017/9639306 ↗
63. Application of Box-Behnken design in the preparation, optimization, and in-vivo pharmacokinetic evaluation of oral tadalafil-loaded niosomal film10.3390/pharmaceutics15010173 ↗
64. Box-Behnken experimental design for the process optimization of catfish bones derived hydroxyapatite: A pedagogical approach10.1016/j.matchemphys.2021.124916 ↗
65. Box-behnken design to enhance the corrosion resistance of plasma sprayed Fe-based amorphous coating10.1016/j.rinp.2019.102708 ↗
66. Empirical model to predict the hydroxyapatite thickness on the surface of 316L stainless steel by the dip coating method10.13168/cs.2021.0041 ↗
67. Thin films of cross-linked polylactic acid as tailored platforms for controlled drug release10.1016/j.surfcoat.2021.127402 ↗
68. Dip coating assisted polylactic acid deposition on steel surface: Film thickness affected by drag force and gravity10.1016/j.matlet.2008.04.046 ↗
69. Improvement of ocular efficacy of levofloxacin by bioadhesive Chitosan coated PLGA nanoparticles: Box-behnken design, in-vitro characterization, antibacterial evaluation and scintigraphy study
70. Unique uniformity of calcium phosphate nanoparticle distribution in polymer substrates for additive manufacturing10.1016/j.compositesa.2023.107670 ↗
71. Removal of antibiotics from water by polymer of intrinsic microporosity: isotherms, kinetics, thermodynamics, and adsorption mechanism10.1038/s41598-020-57616-4 ↗
72. Viscoelastic and thermal properties of doxycycline hyclate-loaded bleached shellac in situ-forming gel and –microparticle10.1016/j.jddst.2018.01.021 ↗
73. Investigating the thermal behavior of doxycycline and meclocycline10.1007/s10973-022-11596-x ↗
74. Thermal degradation of poly(caprolactone), poly(lactic acid), and poly(hydroxybutyrate) studied by TGA/FTIR and other analytical techniques10.1007/s00289-017-2260-3 ↗
75. Characterization of poly(lactic acid)/hydroxyapatite prepared by a solvent-blending technique: Viscoelasticity and in vitro hydrolytic degradation10.1177/0095244314557973 ↗
76. Impact modified PLA-hydroxyapatite composites–Thermo-mechanical properties10.1016/j.compositesa.2018.01.017 ↗
77. Effects of inorganic fillers on the thermal and mechanical properties of poly(lactic acid)10.1155/2014/827028 ↗
78. Study on thermal Behavior of some Biocompatible and Biodegradable Materials based on Plasticized PLA, Chitosan, and Rosemary Ethanolic Extract10.1155/2020/4269792 ↗
79. Synthesis and characterization of PLA-micro-structured hydroxyapatite composite films10.3390/ma13020274 ↗
80. Hydroxyapatite-doped poly(lactic acid) porous film coating for enhanced bioactivity and corrosion behavior of AZ31 Mg alloy for orthopedic applications10.1016/j.ceramint.2012.06.008 ↗
81. Alkali treatment facilitates functional nano-hydroxyapatite coating of 3D printed polylactic acid scaffolds10.1016/j.msec.2020.111686 ↗
82. Spin coating method improved the performance characteristics of films obtained from poly(lactic acid) and cellulose nanocrystals
83. Fabrication and characterization of hydrophobic microarc oxidation/poly-lactic acid duplex coating on biodegradable Mg-Ca alloy for corrosion protection10.1016/j.vacuum.2015.12.022 ↗
84. Melt-compounded polylactic acid composite hybrids with hydroxyapatite nanorods and silver nanoparticles: Biodegradation, antibacterial ability, bioactivity and cytotoxicity10.1039/C5RA14155A ↗
85. Fabrication and characterization of antibacterial suture yarns containing PLA/tetracycline hydrochloride-PVA/chitosan nanofibers10.1007/s12221-022-4685-z ↗
86. In vitro bioactivity, bio-corrosion resistance and antibacterial property of laser cladded HA coatings with different content of ZnO on Ti-6Al-4V substrate10.1590/1980-5373-mr-2018-0744 ↗
87. Surface modification of 316L stainless steel by laser-treated HA-PLA nanocomposite films toward enhanced biocompatibility and corrosion-resistance in vitro10.1016/j.surfcoat.2019.02.052 ↗
88. Synthesis and evaluation of protective poly(lactic acid) and fluorine-doped hydroxyapatite–based composite coatings on AZ31 magnesium alloy10.1557/jmr.2019.317 ↗
89. Investigation of halloysite nanotube effect in poly– (lactic acid)/hydroxyapatite coatings on Ti–6Al–4V biomedical alloy10.1007/s10924-023-02926-7 ↗
90. Strengthened corrosion control of poly (lactic acid) (PLA) and poly (ε-caprolactone) (PCL) polymer-coated magnesium by imbedded hydrophobic stearic acid (SA) thin layer10.1016/j.corsci.2016.07.027 ↗
91. Characterization and biocompatibility study of hydroxyapatite coating on the surface of titanium alloy10.1016/j.surfcoat.2019.07.067 ↗
92. Hydroxyapatite –Al2O3 reinforced poly- (lactic acid) hybrid coatings on magnesium: Characterization, mechanical and in-vitro bioactivity properties
93. Hydrothermal synthesis of nanocrystalline hydroxyapatite–graphene nanosheet on Ti-6Al-7Nb: mechanical and in vitro corrosion performance10.1007/s10856-021-06514-w ↗
94. Composite PCL/HA/simvastatin electrospun nanofiber coating on biodegradable Mg alloy for orthopedic implant application10.1007/s11998-018-0126-8 ↗
95. A. M. El-Shamy and S. M. Mouneir, Medicinal materials as eco-friendly corrosion inhibitors for industrial applications: A review, J. Bio- Tribo-Corros., 9, 1, 3, 2023, doi: 10.1007/s40735-022-00714-9.10.1007/s40735-022-00714-9 ↗
96. The inhibition of carbon-steel corrosion in seawater by streptomycin and tetracycline antibiotics: an experimental and theoretical study10.1016/j.desal.2016.09.007 ↗
97. The effects of pharmaceutically active compound doxycycline on the corrosion of mild steel in hydrochloric acid solution10.1016/j.corsci.2009.09.017 ↗
98. Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: the influence of porosity10.1016/j.jallcom.2016.11.146 ↗
99. Sol-gel synthesis, characterization and properties of TiO2 and Ag-TiO2 coatings on titanium substrate10.1016/j.surfcoat.2016.09.082 ↗
100. Corrosion behaviour of plasma sprayed graphene nanoplatelets reinforced hydroxyapatite composite coatings in simulated body fluid10.1016/j.ceramint.2020.02.139 ↗