journal article·2025-04

Thermophysical properties and Optimization of modified palm Oil-Amine reinforced biocomposites for lightweight and insulating applications

Hakan Şahal, Ercan Aydoğmuş, Hasan Arslanoğlu

Publisher page

Abstract

The aim of this study is to investigate various thermophysical properties of modified palm oil-amine (MPOA) reinforced biocomposites to optimize these materials to meet the requirements of lightness and insulation. The effects of MPOA addition to biocomposites on bulk density, surface hardness, thermal conductivity coefficient, and activation energy have been evaluated. In addition, the structural and physical properties of these biocomposites are aimed to determine their potential use as lightweight and thermal insulation materials. The results show that MPOA incorporation significantly affects the bulk density, Shore A hardness, thermal conductivity, and thermal stability of biocomposites. The addition of MPOA provides significant benefits for lightweight biomaterials by reducing bulk density. However, high MPOA content decreases the surface hardness of the biocomposite, and with zirconium silicate (ZrSiO 4), this drawback is eliminated and the curing time is reduced. Increasing MPOA ratios also improve the insulation properties of biocomposites by reducing the thermal conductivity coefficient. Thermal decomposition experiment results show that higher MPOA content reduces thermal stability. Scanning electron microscopy (SEM) reveals that high levels of MPOA lead to increased surface porosity and irregularities, negatively affecting surface morphology. An optimal MPOA reinforcement level of 5 wt% provides a balance between desirable properties such as reduced density and improved thermal insulation while minimizing adverse morphological effects. Fourier-transform infrared spectroscopy (FTIR) confirms the presence of epoxy resin and the successful chemical modification of palm oil to create bioepoxy feedstock. MPOA reinforcement offers benefits such as reduced bulk density and improved thermal insulation while addressing challenges in surface morphology, mechanical properties, and thermal stability. The study concludes that biocomposites with 5 wt% MPOA provide optimum stability, making them suitable for applications requiring lightweight and thermally insulating materials without significantly compromising structural integrity. This research, the long-term performance of biocomposites, and future investigations into their potential applications will further expand their practical applicability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Properties and characterization of new approach organic nanoparticle-based biocomposite board10.3390/polym12102236 ↗
2. Milling time effects on the thermal degradation, density, and porosity of coconut shell-reinforced epoxy biocomposites
3. Ismail, I.; Aini, Q.; Jalil, Z.; Mursal, M.; Khalil, H.P.S. (2023, August). Utilization of coconut shell nanoparticles for thermal insulation. In AIP Conference Proceedings (Vol. 2858, No. 1). AIP Publishing. DOi: 10.1063/5.0164161.10.1063/5.0164161 ↗
4. Properties enhancement nano coconut shell filled in packaging plastic waste bionanocomposite10.3390/polym14040772 ↗
5. Preparation of palm oil ash nanoparticles: taguchi optimization method by particle size distribution and morphological studies10.3390/app10030985 ↗
6. Study of the properties of thermoset materials derived from epoxidized soybean oil and protein fillers10.1007/s11746-012-2171-2 ↗
7. Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil10.1016/j.matdes.2017.11.031 ↗
8. Processing and characterization of high environmental efficiency composites based on PLA and hazelnut shell flour (HSF) with biobased plasticizers derived from epoxidized linseed oil (ELO)10.1016/j.compositesb.2015.09.063 ↗
9. Plasticization effects of epoxidized vegetable oils on mechanical properties of poly(3-hydroxybutyrate)10.1002/pi.5164 ↗
10. Blending of epoxidised palm oil with epoxy resin: the effect on morphology, thermal and mechanical properties10.1007/s10924-012-0418-5 ↗
11. Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil10.1016/j.indcrop.2017.10.062 ↗
12. A review on effect of nanoparticle addition on thermal behavior of natural fiber–reinforced composites
13. Advancing thermoset polymer composites with nanoclay reinforcement: a comprehensive investigation within composite interfaces
14. Advanced developments in carbon nanotube polymer composites for structural applications
15. Rajak, D. K., Wagh, P. H., & Linul, E. (2021). Manufacturing technologies of carbon/glass fiber-reinforced polymer composites and their properties: A review. Polymers, 13(21), 3721.Hsissou R, Benassaoui H, Benhiba F, et al. J Chem Technol Metall.2017, 52, 431. DOi: 10.3390/polym13213721.10.3390/polym13213721 ↗
16. Mechanical characterization of hybrid nano-filled glass/epoxy composites10.3390/polym14224852 ↗
17. Research progress on enhancement mechanism and mechanical properties of FRP composites reinforced with graphene and carbon nanotubes10.1016/j.aej.2022.09.019 ↗
18. A comprehensive review on fiber-reinforced polymer composites: Raw materials to applications, recycling, and waste management
19. Cherian, R. M., Unnikrishnan, T. G., Cherian, M., Joy, J., Chirayil, C. J., Panneerselvam, K., & Thomas, S. (2024). Epoxy resins: Synthesis, structure, and properties. In Handbook of Thermosetting Foams, Aerogels, and Hydrogels (pp. 251-286). Elsevier. DOi: 10.1016/B978-0-323-99452-1.00004-8.10.1016/B978-0-323-99452-1.00004-8 ↗
20. Lugoloobi, I., Farhadi, B., & Islam, S. R. (2024). Morphology, rheology, properties, and applications of graphene-filled polymer blends. In Nanofillers for Binary Polymer Blends (pp. 243-275). Elsevier. DOi: 10.1016/B978-0-323-88655-0.00002-1.10.1016/B978-0-323-88655-0.00002-1 ↗
21. Synthesis, Properties and Applications of Polymer Nanocomposites-A Review
22. Micro/nano fillers for value‐added polymer composites: A comprehensive review10.1002/vnl.22106 ↗
23. Nagabhooshanam · 2024 · V. K
24. A critical review of polymer support‐based shape‐stabilized phase change materials for thermal energy storage applications10.1002/est2.639 ↗
25. Reinforced Multiscale Polymer Composites, Properties and Applications
26. Review of Fiber-Reinforced Composite Structures with Multifunctional Capabilities through Smart Textiles10.3390/textiles4030023 ↗
27. Li, C., Feng, C., Zhang, L., Zhang, L., & Wang, L. Direct ink writing of polymer‐based materials—A review. Polymer Engineering & Science. DOi: 10.1002/pen.27038.10.1002/pen.27038 ↗
28. Preparation of novel marine antifouling polyurethane coating materials10.1007/s00289-018-2302-5 ↗
29. Effects and mechanism of filler surface coating strategy on thermal conductivity of composites: A case study on epoxy/SiO2-coated BN composites10.1016/j.ijheatmasstransfer.2020.120533 ↗
30. A Study of Reusability Assessment and Thermal Behaviours for Thermoplastic Composite Materials after Melting Process: Polypropylene/Thermoplastic Polyurethane Blends10.1016/j.jclepro.2020.123473 ↗
31. Surface modification engineering on polymer materials toward multilevel insulation properties and subsequent dielectric energy storage10.1016/j.mattod.2024.09.008 ↗
32. Rheological properties and thermal stability of compatibilized polypropylene/untreated silica composites prepared by water injection extrusion process10.1007/s00289-018-2344-8 ↗
33. Development and potential performance of prepolymer in corrosion inhibition for carbon steel in 1.0 M HCl: Outlooks from experimental and computational investigations10.1016/j.jcis.2020.04.022 ↗
34. Rheological behavior of polypropylene/carbon quantum dot nanocomposites: the effects of particles size, particles/matrix interface adhesion, and particles loading10.1007/s00289-018-2611-8 ↗
35. Epoxy pre-polymers as new and effective materials for corrosion inhibition of carbon steel in acidic medium: Computational and experimental studies10.1038/s41598-019-48284-0 ↗
36. Rheological properties of composite polymers and hybrid nanocomposites10.1016/j.heliyon.2020.e04187 ↗
37. Epoxy resins as anticorrosive polymeric materials: A review10.1016/j.reactfunctpolym.2020.104741 ↗
38. Recent advances of thermosetting resin and its application prospect in oil and gas drilling and production engineering
39. Synergistic effect of CNT films impregnated with CNT modified epoxy solution towards boosted interfacial bonding and functional properties of the composites10.1016/j.compositesa.2018.04.011 ↗
40. Degradation of epoxy coatings under gamma irradiation10.1016/j.radphyschem.2012.09.008 ↗
41. Preparation and mechanical properties of flexible prepreg resin with high strength and low creep10.3390/polym16040558 ↗
42. Innovating PVC plasticization: performance and potential of a lauric acid ester-amide plasticizer
43. Hierarchical aerospace epoxy composites of carbon fiber and hyperbranched filler: Toughening behavior from nanocomposites to composites10.1016/j.compstruct.2023.117719 ↗
44. Life-Cycle Environmental Impacts of Additive-Related Chemicals in Polyvinyl Chloride Plastics and the Mitigation Potential10.1021/acs.est.4c00449 ↗
45. Room-temperature, high-voltage solid-state lithium battery with composite solid polymer electrolyte with in-situ thermal safety study10.1016/j.cej.2020.125996 ↗
46. Experimental and numerical study on thermal protection by silica aerogel based phase change composite10.1016/j.egyr.2020.06.026 ↗
47. Study on process and performance of thermal protective coating on polyimide resin matrix composite10.1016/j.ceramint.2020.02.043 ↗
48. Recent developments in different types of flame retardants and effect on fire retardancy of epoxy composite10.1080/03602559.2016.1163607 ↗
49. Characterization and properties of new silicone-containing epoxy resin10.1016/S0032-3861(99)00790-9 ↗
50. Influence of POSS structure on the fire retardant properties of epoxy hybrid networks10.1016/j.polymdegradstab.2009.06.025 ↗
51. Biobased epoxy resin with low electrical permissivity and flame retardancy: from environmental friendly high-throughput synthesis to properties10.1021/acssuschemeng.8b01212 ↗
52. Study on Curing Mechanism of Epoxy Resin/Multi-Walled Carbon Nanotubes Composites Based on 2D Correlation Infrared Spectroscopy
53. Study of Hygrothermal Aging for Basalt Fiber/Epoxy Resin Composites Modified with CeCl310.3390/polym16060819 ↗
54. Study of electrical properties of graphene/epoxy resin composites induced by external electric field10.1007/s10965-024-03882-z ↗
55. Effect of sonication parameters on the mechanical properties of multi-walled carbon nanotube/epoxy composites10.1016/j.matdes.2013.11.013 ↗
56. Thermal, mechanical, and morphological properties of oil palm cellulose nanofibril reinforced green epoxy nanocomposites10.1016/j.ijbiomac.2024.134421 ↗
57. Interactions between inorganic nanoparticles and cellulose nanofibrils10.1007/s10570-012-9656-x ↗
58. Enhancing the bio-epoxy composites with oil palm fibre as reinforcement: assessment of mechanical, physical and thermal properties
59. Synthesis and characterization of EPS reinforced modified castor oil-based epoxy biocomposite
60. Diatomite reinforced modified safflower oil-based epoxy biocomposite production: Optimization with RSM and assessment of outcomes by ANN
61. Determination of thermophysical properties of Ficus elastica leaves reinforced epoxy composite10.5505/fujece.2023.21931 ↗
62. Production and characterization of palm oil based epoxy biocomposite by RSM design10.17350/HJSE19030000241 ↗