Slow-Scan anodization of copper in alkaline Solution: Synthesis, performance Evolution, and theoretical analysis of Cu(OH)2 nanowires for High-Performance supercapacitors
Source abstract
Abstract
In this work, a binder-free Cu/Cu(OH) 2 NwBs electrode was fabricated using a simple potentiodynamic anodization method. The effect of anodization scan rates of 3, 0.5, and 0.1 mV/s on the structural, morphological, and supercapacitive properties was thoroughly investigated. An areal capacitance of 22.5 mF/cm 2 at 1 mA/cm 2 was achieved at scan rate of anodization 0.1 mV/s. The Cu/Cu(OH) 2 electrode demonstrates excellent retention cyclic stability of 120 % after 10,000 cycles. Post-cycling analysis revealed a phase transformation from Cu(OH) 2 to CuO, accompanied by significant morphological changes. A theoretical model based on Fick’s law was employed, which aligned well with the experimental data. The diffusion coefficient values were calculated from charge/discharge data, and the results indicated that higher diffusion coefficients corresponded to higher specific capacitance, demonstrating improved supercapacitor performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Nanoporous metals and alloys · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Pyridine 3,5-dicarboxylate-based metal–organic frameworks as an active electrode material for battery-supercapacitor hybrid energy storage devices10.1039/D3RA07104A ↗
2. Recent advances in Ru/Ir-based electrocatalysts for acidic oxygen evolution reaction10.1016/j.apcatb.2023.123584 ↗
3. In Situ Phase Transformation to form MoO3- MoS2 Heterostructure with Enhanced Printable Sodium Ion Storage10.1002/adfm.202470159 ↗
4. Elucidating the redox activity of cobalt-1,2,3,4-cyclopentane-tetracarboxylic acid and 1,2,4,5-benzene-tetracarboxylic acid-based metal–organic frameworks for a hybrid supercapacitor10.1039/D3RA05820D ↗
5. Innovating the future: Synergistic integration of binary metal sulfides and carbon nanotubes for flexible supercapacitors and hydrogen evolution10.1016/j.est.2023.109434 ↗
6. Microflowers of Sn-Co-S derived from ultra-thin nanosheets for supercapacitor applications10.1016/j.est.2022.104084 ↗
7. Gadolinium doped zinc ferrite nanoarchitecture reinforced with a carbonaceous matrix: a novel hybrid material for next-generation flexible capacitors10.1039/D3RA05290G ↗
8. Supercapacitors for renewable energy applications: A review10.1016/j.mne.2023.100229 ↗
9. Advanced strategies in electrode engineering and nanomaterial modifications for supercapacitor performance enhancement: A comprehensive review10.1016/j.est.2023.110152 ↗
10. Exploring the electrochemical performance of 1, 3, 5-benzenetricarboxylic acid as an organic ligand on various metals for hybrid supercapacitors10.1016/j.matchemphys.2023.127948 ↗
11. Morphological nanoflowers of Ni-doped SnS for high-performance electrode materials for supercapacitors10.1016/j.est.2023.107717 ↗
12. Nanocomposite Supercapacitor Electrode from Sulfonated Graphene Oxide and Poly(pyrrole-(biphenyldisulfonic acid)-pyrrole)10.1021/acsaem.0c00874 ↗
13. Redox-active supercapacitor electrode from two-monomer-connected precursor (Pyrrole: Anthraquinonedisulfonic acid: Pyrrole) and sulfonated multi-walled carbon nanotube10.1016/j.electacta.2022.140243 ↗
14. Porous CuCo2O4 microtubes as a promising battery-type electrode material for high-performance hybrid supercapacitors10.1016/j.jmat.2021.03.011 ↗
15. Metal oxide-based supercapacitors: progress and prospectives10.1039/C9NA00543A ↗
16. Transition Metal Oxide Electrode Materials for Supercapacitors: A Review of Recent Developments10.3390/nano11051248 ↗
17. A comprehensive review on the progress of transition metal oxides materials as a supercapacitor electrode10.1016/j.mseb.2024.117544 ↗
18. Tailoring the dielectric and electrochemical properties of ZnO–CoO with Fe doping for energy storage devices10.1007/s10854-024-12449-z ↗
19. Supercapacitor and magnetic properties of NiO and manganese-doped NiO nanoparticles synthesized by chemical precipitation method
20. Flower-like ZnCo2O4 microstructures with large specific surface area serve as battery-type cathode for high-performance supercapacitors10.1016/j.est.2023.108502 ↗
21. High-performance asymmetric supercapacitors assembled with novel disc-like MnCo2O4 microstructures as advanced cathode material10.1016/j.jcis.2024.04.087 ↗
22. Advanced hybrid supercapacitors assembled with CoNi LDH nanoflowers and nanosheets as high-performance cathode materials10.1016/j.est.2024.110535 ↗
23. Porous MgCo2O4 nanoflakes serve as electrode materials for hybrid supercapacitors with excellent performance10.1016/j.jcis.2022.06.098 ↗
24. Copper oxide-based high-performance symmetric flexible supercapacitor: potentiodynamic deposition10.1007/s10854-023-10738-7 ↗
25. Preparation of high-performance supercapacitor electrode with nanocomposite of CuO/NCNO flower-like10.1038/s41598-023-43430-1 ↗
26. Needle-like Cu(OH)2 in situ grown on nanoporous copper ribbon via anodizing route for supercapacitors10.1016/j.matchemphys.2022.126046 ↗
27. Tuning the composition of CuO/Cu2O composite powders via solution combustion method for supercapacitor application10.1016/j.mseb.2024.117479 ↗
28. Electronic modulation induced by oxygen vacancy creating in copper oxides toward accelerated hydrogenation kinetics of nitroaromatics10.1016/j.apcatb.2023.123575 ↗
29. Recent advancements of copper oxide based nanomaterials for supercapacitor applications10.1016/j.est.2020.101995 ↗
30. Optimizing Pt-Based Alloy Electrocatalysts for Improved Hydrogen Evolution Performance in Alkaline Electrolytes: A Comprehensive Review
31. D. E. Guitoume et al., “Synthesis of CuO nanosheets on Cu foil via one-step wet chemical process at different reaction temperatures and their photoelectrochemical performance,” Polyhedron, p. 117156, Jul. 2024, doi: 10.1016/j.poly.2024.117156.10.1016/j.poly.2024.117156 ↗
32. Three-Dimensional Porous Network Electrodes with Cu(OH) 2 Nanosheet/Ni 3 S 2 Nanowire 2D/1D Heterostructures for Remarkably Cycle-Stable Supercapacitors10.1021/acsomega.1c03507 ↗
33. Design and Construction of Cu(OH)2/Ni3S2 Composite Electrode on Cu Foam by Two-Step Electrodeposition10.3390/mi13020237 ↗
34. Room-temperature growth of Co(OH)2 nanosheets on nanobelt-like Cu(OH)2 arrays for a binder-free high-performance all-solid-state supercapacitor10.1021/acsaem.1c02398 ↗
35. Synthesis and characterization of Cu(OH)2-NWs-PVA-AC Nano-composite and its use as an efficient adsorbent for removal of methylene blue10.1038/s41598-021-84797-3 ↗
36. Morphology control of copper hydroxide based nanostructures in liquid phase synthesis10.1016/j.jcrysgro.2021.126225 ↗
37. Effect of deposition potential and annealing on performance of electrodeposited copper oxide thin films for supercapacitor application10.1016/j.solidstatesciences.2021.106780 ↗
38. Ultrafast Growth of a Cu(OH) 2 –CuO Nanoneedle Array on Cu Foil for Methanol Oxidation Electrocatalysis10.1021/acsami.0c08979 ↗
39. Low-voltage anodizing of copper in sodium bicarbonate solutions10.1016/j.electacta.2023.141918 ↗
40. Investigations of copper in aqueous alkaline solutions by cyclic voltammetry10.1016/S0022-0728(73)80344-4 ↗
41. Cyclic voltammetric and spectroelectrochemical studies of copper in alkaline solution10.1016/0013-4686(92)80005-7 ↗
42. Formation of oxides on copper in alkaline solution and their photoelectrochemical properties10.1134/S2070205111020080 ↗
43. Electrochemical Study of Bulk and Monolayer Copper in Alkaline Solution10.1149/2.0071605jes ↗
44. Y. Cao et al., “Better Charge Separation in CuO Nanowire Array Photocathodes: Micro-/Nanostructure Regulation for Photoelectrochemical Reaction,” ACS Appl. Energy Mater., vol. 3, no. 7, Art. no. 7, Jul. 2020, doi: 10.1021/acsaem.0c00554.10.1021/acsaem.0c00554 ↗
45. Copper oxide nanosheets and nanowires grown by one-step linear sweep voltammetry for supercapacitor application10.1016/j.est.2020.101631 ↗
46. Mesocrystalline materials and the involvement of oriented attachment – a review10.1039/C4CE00882K ↗
47. Bard · 2001
48. Biosynthesis Of Colloidal Copper Hydroxide Nanowires Using Pistachio Leaf Extract10.5185/amlett.2015.5630 ↗
49. Role of porosity and diffusion coefficient in porous electrode used in supercapacitors – Correlating theoretical and experimental studies10.1002/elsa.202100159 ↗
50. Comparative supercapacitance performance of CuO nanostructures for energy storage device applications10.1039/C5RA00035A ↗
51. Facile and scalable fabrication of three-dimensional Cu(OH) 2 nanoporous nanorods for solid-state supercapacitors10.1039/C5TA04164C ↗
52. Co-MOF/polyaniline-based electrode material for high performance supercapattery devices10.1016/j.electacta.2020.136039 ↗
53. Supercapacitors Performance Evaluation10.1002/aenm.201401401 ↗
54. Y. X. Zhang, M. Huang, F. Li, and Z. Q. Wen, “Controlled Synthesis of Hierarchical CuO Nanostructures for Electrochemical Capacitor Electrodes,” Int J Electrochem Sci, vol. 8, 2013.10.1016/S1452-3981(23)12916-6 ↗
55. Testing of electrochemical capacitors: Capacitance, resistance, energy density, and power capabilityଝ10.1016/j.electacta.2010.04.074 ↗
56. Engineering hierarchical ultrathin CuCo2O4 nanosheets array on Ni foam by rapid electrodeposition method toward high-performance binder-free supercapacitors10.1016/j.apsusc.2018.03.193 ↗
57. One-step synthesis of copper compounds on copper foil and their supercapacitive performance10.1039/C5RA04889C ↗
58. M.-I. Morariu (Popescu) et al., “Fabrication of Cu2O/CuO Nanowires by One-Step Thermal Oxidation of Flexible Copper Mesh for Supercapacitor Applications,” Batteries, vol. 10, no. 7, p. 246, Jul. 2024, doi: 10.3390/batteries10070246.10.3390/batteries10070246 ↗
59. High performance flexible energy storage device based on copper foam supported NiMoO4 nanosheets-CNTs-CuO nanowires composites with core–shell holey nanostructure10.1016/j.jmst.2020.11.076 ↗
60. Commercial Dacron cloth supported Cu(OH) 2 nanobelt arrays for wearable supercapacitors10.1039/C6TA06634H ↗
61. In-situ fabrication of nanosheet arrays on copper foil as a new substrate for binder-free high-performance electrochemical supercapacitors10.1016/j.jelechem.2017.08.048 ↗
62. Binder-free NiO/CuO hybrid structure via ULPING (Ultra-short Laser Pulse for In-situ Nanostructure Generation) technique for supercapacitor electrode10.1038/s41598-023-34274-w ↗
63. Facilely synthesis of 3D Cu O–Cu nanostructures as binder-free electrode for supercapacitors10.1016/j.cplett.2016.04.006 ↗
64. Electric Field Enhanced Synthesis of Copper Hydroxide Nanostructures for Supercapacitor Application10.1142/S1793292017500102 ↗
65. Electrodeposited porous and amorphous copper oxide film for application in supercapacitor10.1016/j.matchemphys.2008.09.031 ↗
66. Hierarchical CuO@ZnCo–OH core-shell heterostructure on copper foam as three-dimensional binder-free electrodes for high performance asymmetric supercapacitors10.1016/j.jpowsour.2020.228239 ↗
67. A. M. Castro Luna De Medina, S. L. Marchiano, and A. J. Arvia, “The potentiodynamic behaviour of copper in NaOH solutions,” J. Appl. Electrochem., vol. 8, no. 2, pp. 121–134, Mar. 1978, doi: 10.1007/BF00617670.10.1007/BF00617670 ↗
68. The influence of reconstructive transformation from micro-/nanostructured copper(II) hydroxide to copper oxides as electrodes for high-performance supercapacitors10.1016/j.jallcom.2023.173095 ↗
69. High performance magnetic pseudocapacitors - Direct correlation between specific capacitance and diffusion coefficients10.1016/j.electacta.2021.139252 ↗
70. Theoretical Model for Magnetic Supercapacitors—From the Electrode Material to Electrolyte Ion Dependence10.1021/acs.jpcc.0c07538 ↗
71. Effect of electrode morphology on the diffusion length of the doping process of electronically conducting polypyrrole films10.1016/S1388-2481(03)00037-7 ↗
72. Y. X. Zhang, M. Huang, F. Li, and Z. Q. Wen, “Controlled Synthesis of Hierarchical CuO Nanostructures for Electrochemical Capacitor Electrodes,” Int. J. Electrochem. Sci., vol. 8, no. 6, Art. no. 6, Jun. 2013, doi: 10.1016/S1452-3981(23)12916-6.10.1016/S1452-3981(23)12916-6 ↗