journal article·2021-01

Preparation and characterization of ZnO nanorods grown on Pd-activated polyacrylonitrile (PAN) fiber

Jae-Young Lee, Hong-Ki Lee

Publisher page

Abstract

Abstract Zinc oxide (ZnO) nanorods were synthesized on the surface of polyacrylonitrile (PAN) fiber by electroless reaction, which was pre-activated with palladium (Pd) nanoparticles. Pd-activation process was achieved by a reduction reaction of palladium(II) bis(acetylacetonate), Pd(acac)2 in a dry process, that is to say, Pd(acac)2 molecules sublimated, penetrated into the surface of PAN fiber and spontaneously reduced to Pd nanoparticles at 180 °C under nitrogen atmosphere. The morphology of hexagonal ZnO nanorods grown on the surface of PAN fiber was observed by a field emission scanning electron microscopy (FE-SEM) and their elemental composition was evaluated by an X-ray photoelectron spectroscopy (XPS). X-ray diffraction (XRD) analysis showed that the crystalline structure of ZnO nanorods was wurtzite cryatal structure consisted of hexagonal lattice. Sulfur removal performance of the ZnO nanorod increased with increasing electroless reaction time. The saturated H2S uptake weight was 12.4 wt% of ZnO/PAN fiber prepared at 80 °C for 180 min.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Biohydrogen production from anaerobic digestion and its potential as renewable energy10.1016/j.renene.2017.04.029 ↗
2. Performance of an HT‐PEMFC having a catalyst with graphene and multiwalled carbon nanotube support10.1002/er.4504 ↗
3. Enhancement of Pt and Pt-alloy fuel cell catalyst activity and durability via nitrogen-modified carbon supports10.1039/c003710a ↗
4. Enhanced HOR catalytic activity of PGM-free catalysts in alkaline media: the electronic effect induced by different heteroatom doped carbon supports10.1039/C9TA01916B ↗
5. Sulfur poisoning and regeneration of bimetallic Pd-Pt methane oxidation catalysts10.1016/j.apcatb.2017.06.048 ↗
6. Sulfur Dioxide-Tolerant Bimetallic PtRu Catalyst toward Oxygen Electroreduction10.1021/acssuschemeng.9b06785 ↗
7. Review and evaluation of hydrogen production methods for better sustainability10.1016/j.ijhydene.2014.12.035 ↗
8. Photocatalytic Reforming of Biomass Derived Crude Glycerol in Water: A Sustainable Approach for Improved Hydrogen Generation Using Ni(OH) 2 Decorated TiO 2 Nanotubes under Solar Light Irradiation10.1021/acssuschemeng.7b04118 ↗
9. Hybrid-solid oxide electrolysis cell: A new strategy for efficient hydrogen production10.1016/j.nanoen.2017.11.074 ↗
10. Competitive adsorption desulfurization performance over K – Doped NiY zeolite10.1016/j.jcis.2016.08.024 ↗
11. High performances of mesoporous g-C3N4 for adsorptive desulfurization in model gasoline (iso-octane) solutions10.1016/j.apsusc.2018.04.084 ↗
12. Desulfurization of Biomass Syngas Using ZnO-Based Adsorbents: Long-Term Hydrogen Sulfide Breakthrough Experiments10.1021/acs.energyfuels.9b04276 ↗
13. ZnS coating for enhanced environmental stability and improved properties of ZnO thin films10.1039/C8RA02823K ↗
14. Surface sulfurization of ZnO/ZnS core shell nanowires and shell layers dependent optical properties
15. Surface modification and metallization of polycarbonate using low energy ion beam10.1016/j.radphyschem.2016.04.010 ↗
16. Method for electroless nickel plating on poly(ethylene terephthalate) substrate modified with primer and self-assembled monolayer
17. Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review10.1007/s10853-015-9668-7 ↗
18. Study of electroless copper plating on ABS resin surface modified by heterocyclic organosilane self-assembled film10.1007/s12034-014-0615-z ↗
19. Electroless metallization of polymers, Archives of Mater
20. Optimization Of Nickel Deposition On Boron Carbide Particles Using Design Of Experiments
21. Synthesis of carbon supported Pd-Sn catalysts by ethylene glycol method for ethanol electrooxidation10.20964/2016.08.18 ↗
22. Fabrication of Nickel Coating on Polyethylene Terephthalate Substrate Modified with Primer: Effect of Surface Roughness on Structural Properties of Plated Coating10.1007/s11664-019-07291-7 ↗
23. Site and Morphology Controlled ZnO Deposition on Pd Catalyst Prepared from Pd/PMMA Thin Film Using UV Lithography10.1021/cm0506555 ↗
24. Electroless Ni-P metallization on palladium activated polyacrylonitrile (PAN) fiber by using a drying process10.1016/j.matchemphys.2017.10.048 ↗
25. Y. Yu, Y. Zhao, T. Huang, H. Liu, Shape-controlled synthesis of palladium nanocrystals by microwave irradiation, Pure Appl. Chem. 81 (2009) 2377-2385. doi:10.1351/PAC-CON-08-11-22.10.1351/PAC-CON-08-11-22 ↗
26. S.J. Kerber, T.L. Barr, G.P. Mann, W.A. Brantley, E. Papazoglou, J.C. Mitchell, The complementary nature of X-ray photoelectron spectroscopy and angle-resolved X-ray diffraction - Part I: background and theory, J. Mater. Eng. Performance 7 (1998) 329-333.10.1361/105994998770347765 ↗
27. Comparison of basic principles of the surface-specific analytical methods: AES/SAM, ESCA (XPS), SIMS, and ISS with X-ray microanalysis, and some applications in research and industry10.1002/sca.4950110602 ↗
28. HiFUEL® Hydrogen Sulfide Removal Material.
29. https://www.alfa.com/media/HiFUEL_Hydrogen_Sulfide_Removal_Material.pdf.
30. P. Ding, D. Xu, H. Huang, P. Xu, D. Zheng, ZnS modified ZnO nano-heterojunction for efficient trace H2S gas detection, IOP Conf. Series: Materials Science and Engineering 452 (2018) 022031 (1-6).10.1088/1757-899X/452/2/022031 ↗
31. The growth of porous ZnO nanowires by thermal oxidation of ZnS nanowires10.1166/jnn.2011.4057 ↗