journal article·2025-11Open access

In situ X-ray Diffraction investigation of Graphene-Enhanced Sn-Ag solder Alloys: Insights into phase transformations

Jayesh Shanthi Bhavan, Mohamed Amer, T.G. Unnikrishnan

Abstract

This study focuses on the in situ X-ray Diffraction analysis of graphene nanosheet reinforced Sn-Ag lead-free solder alloys to investigate the impact of GNS on phase stability, texture evolution, and thermal behavior during heating and cooling cycles. The in situ XRD results reveal significant phase transformations, including the dissolution of the Ag3Sn intermetallic phase at elevated temperatures and its partial reformation upon cooling, highlighting the influence of GNS on phase stability. Texture analysis demonstrates the preferential alignment of specific crystallographic planes (100}, {010}, and {001}) in the Ag3Sn phase, facilitated by the presence of GNS acting as nucleation sites. Electron Backscatter Diffraction and Scanning Electron Microscopy confirm grain refinement and enhanced crystallographic texture in the alloy, while Differential Scanning Calorimetry and Thermogravimetric Analysis reveal shifts in melting behavior and improved thermal stability after GNS incorporation. The integration of these findings demonstrates that GNS significantly enhances the microstructure and properties of Sn-Ag alloys, making the alloy appropriate for high-performing applications in electronics industry, This research provides novel insights into the dynamic behavior of graphene-reinforced solder alloys, emphasizing their potential for advanced packaging technologies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Advances in lead-free electronics soldering10.1016/S1359-0286(00)00036-X ↗
2. Tensile, hardness and microstructural properties of Sn-Pb solder alloys10.1016/j.matpr.2020.09.656 ↗
3. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
4. Experimental investigation on the effect of Ag addition on Ternary Lead free solder alloy –Sn–0.5Cu–3Bi10.1007/s12540-019-00305-3 ↗
5. M. Hedemann-Robinson, “The EU Directives on Waste Electrical and Electronic Equipment and on the Restriction of Use of Certain Hazardous Substances in Electrical and Electronic Equipment: Adoption Achieved,” European Energy and Environmental Law Review, pp. 52–60, 2003, [Online]. Available: http://www.kluwerlawonline.com/api/Product/CitationPDFURL?file=Journals\EELR\EELR2003007.pdf.10.54648/EELR2003007 ↗
6. Low melting point solders based on Sn, Bi, and In elements
7. Recent progress on the development of Sn–Bi based low-temperature Pb-free solders10.1007/s10854-019-00701-w ↗
8. Inhibition of intermetallic compounds growth at Sn–58Bi/Cu interface bearing CuZnAl memory particles (2–6 μm)10.1007/s10854-019-02784-x ↗
9. Present status of Sn–Zn lead-free solders bearing alloying elements10.1007/s10854-014-2659-7 ↗
10. Correlation between the growth of voids and Ni3Sn4 Intermetallic compounds at SnAg/Ni and SnAgCuBiSbNi/Ni Interfaces at temperatures up to 200°C10.1007/s11664-019-07727-0 ↗
11. Temperature-dependent fatigue modelling of a novel Ni, Bi and Sb containing Sn-3.8Ag-0.7Cu lead-free solder alloy10.1111/ffe.13313 ↗
12. Corrosion problems of SAC-SiC composite solder alloys10.1016/j.corsci.2023.111488 ↗
13. Influence of SiC reinforcement on microstructural and thermal properties of SAC0307 solder joints10.1016/j.jmrt.2022.11.126 ↗
14. A. Skwarek et al., “Application of ZnO Nanoparticles in Sn99Ag0.3Cu0.7-Based Composite Solder Alloys,” Nanomaterials, vol. 11, no. 6, 2021, doi: 10.3390/nano11061545.10.3390/nano11061545 ↗
15. M. Z. Yahaya, M. F. M. Nazeri, S. Kheawhom, B. Illés, A. Skwarek, and A. A. Mohamad, “Microstructural analysis of Sn-3.0Ag-0.5Cu-TiO2 composite solder alloy after selective electrochemical etching,” Mater Res Express, vol. 7, no. 1, p. 16583, Jan. 2020, doi: 10.1088/2053-1591/ab6b57.10.1088/2053-1591/ab6b57 ↗
16. A novel real-time assessment of the Wear analysis of Cu-Ni-Sn hybrid composite for multifunctional applications strengthened by Nano B4C10.24425/amm.2024.150923 ↗
17. Study of tribological and mechanical properties of composite reinforced with tungsten carbide10.1063/5.0121012 ↗
18. “Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique-bibtex”.
19. V. Agarwal, D. Goyal, B. S. Pabla, S. C. Vettivel, and A. Haiter Lenin, “Optimization and Characterization Studies of Dissimilar Friction Stir Welding Parameters of Brass and Aluminum Alloy 6063 Using Taguchi,” Advances in Materials Science and Engineering, vol. 2023, no. 1, p. 8275323, Jan. 2023, Doi: 10.1155/2023/8275323.10.1155/2023/8275323 ↗
20. Y. Li et al., “A Review on the Development of Adding Graphene to Sn-Based Lead-Free Solder,” Metals (Basel), vol. 13, no. 7, 2023, doi: 10.3390/met13071209.10.3390/met13071209 ↗
21. Novel electroless plating of silver nanoparticles on graphene nanoplatelets and its application for highly conductive epoxy composites10.1016/j.jiec.2021.01.014 ↗
22. Strengthening effect of single-atomic-layer graphene in metal–graphene nanolayered composites10.1038/ncomms3114 ↗
23. Reinforcement with graphene nanosheets in aluminum matrix composites10.1016/j.scriptamat.2012.01.012 ↗
24. Effects of graphene nanosheets addition on microstructure and mechanical properties of SnBi solder alloys during solid-state aging10.1016/j.msea.2017.04.105 ↗
25. Sn–3.0Ag–0.5Cu nanocomposite solders reinforced by graphene nanosheets10.1007/s10854-016-4631-1 ↗
26. EBSD characterization of graphene nano sheet reinforced Sn–Ag solder alloy composites10.1016/j.jmrt.2024.04.043 ↗
27. S. Eray, “Application of metal oxides in composites,” Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications, pp. 101–119, Jan. 2020, doi: 10.1016/B978-0-12-817505-7.00006-3.10.1016/B978-0-12-817505-7.00006-3 ↗
28. EBSD characterization of Ag3Sn phase transformation in Sn–Ag lead-free solder alloys: a comparative study before and after heat treatment10.1007/s10854-024-13349-y ↗
29. Effect of graphene nanoplatelets on wetting, microstructure, and tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) alloy10.1007/s11661-015-3214-8 ↗
30. Recrystallization mechanisms and microstructure development in emerging metallic materials: a review
31. Factors affecting particle-coarsening kinetics and size distribution10.1007/BF01139016 ↗
32. Y. Li, A. J. Bushby, and D. J. Dunstan, “The Hall–Petch effect as a manifestation of the general size effect,” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 472, no. 2190, p. 20150890, 2016, doi: 10.1098/rspa.2015.0890.10.1098/rspa.2015.0890 ↗
33. Correlation between localized strain and damage in shear-loaded Pb-free solders10.1016/j.microrel.2006.09.025 ↗
34. Effects of graphene reduction degree on thermal oxidative stability of reduced graphene oxide/silicone rubber nanocomposites10.1177/0954008315604205 ↗
35. Mobility of low-angle grain boundaries in pure metals10.1080/14786435.2010.481272 ↗
36. Transition between low and high angle grain boundaries10.1016/j.actamat.2005.03.005 ↗
37. EBSD: a powerful microstructure analysis technique in the field of solidification10.1111/j.1365-2818.2008.03107.x ↗
38. Preferential growth and orientation relationship of Ag3Sn grains formed between molten Sn and (001) Ag single crystal10.1557/jmr.2009.0237 ↗
39. Nucleation and growth of Ag3Sn in Sn-Ag and Sn-Ag-Cu solder alloys10.1016/j.actamat.2023.118831 ↗
40. Properties and microstructures of sn-ag-cu-X Lead-free solder joints in electronic packaging
41. Temperature-dependent fatigue modelling of a novel ni, bi and sb containing sn-3.8Ag-0.7Cu lead-free solder alloy10.1111/ffe.13313 ↗