Fluidized spray driven polymer mediated ultra stable Aluminum metal coating with enhanced dielectric properties
Source abstract
Abstract
In this work, a novel method for coating the polymeric substrate with an aqueous metallic powder (Aluminum) solution was developed. In the modified fluidized bed, assisted bottom spray coater was used to achieve the strong interfacial coating of the aluminum on the fluidized spherical expanded polystyrene (EPS) substrate and polyvinyl alcohol (PVA) as a binder. The coated aluminum metal exhibits a layered thickness of 340 ± 50 µm. The effect of fluidization airflow rate, spray rate, atomization air pressure, and inlet air temperature on the aluminum coating on the EPS spheres was investigated for the first time. The substantial integrity, interfacial bonding and surface morphology of aluminum coating were confirmed through XRD, FTIR, shaking test and SEM analysis. In addition, a remarkably high dielectric constant of 12,000 compared to the dielectric constant of the pristine EPS sphere of 60 at low frequency was observed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · Surface Modification and Superhydrophobicity · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Characterization of mechanical properties of metal-coated polymer spheres for anisotropic conductive adhesive
2. Polystyrene-Supported Core-Shell Beads with Aluminium MOF Coating for Extraction of Organic Pollutants10.1002/asia.201900737 ↗
3. Fabrication of a Metal-Coated Three-Dimensionally Ordered Macroporous Film and its Application as a Refractive Index Sensor**10.1002/1521-3773(20020402)41:7<1153::AID-ANIE1153>3.0.CO;2-4 ↗
4. The potential barrier and thermal stability dependence on PI thickness of Al/PI/c-Si schottky diode, Iraqi Journal of
5. Effect of multiwalled carbon nanotube reinforcement on the opto-electronic properties of polyaniline/c-Si heterojunction10.1515/joc-2018-0024 ↗
6. A.A. Kareem, Enhanced thermal and electrical properties of epoxy/carbon fiber–silicon carbide composites, Advanced Composites Letters. 29 (2020) 2633366X19894598.10.1177/2633366X19894598 ↗
7. Synthesis, characterization and adsorption studies of several heavy metal ions on amino-functionalized silica nano hollow sphere and silica gel10.1016/j.seppur.2011.10.011 ↗
8. Ultra-low thermal conductivity thermal barrier coatings from recycled fly-ash cenospheres10.1016/j.actamat.2011.01.011 ↗
9. Metallic hollow spheres-materials for the future10.1016/S0026-0657(00)87339-7 ↗
10. Use of Composite Metal Foam for Improving Absorption of Collision Forces, Procedia
11. J. Cox, D.D. Luong, V.C. Shunmugasamy, N. Gupta, O.M. Strbik, K. Cho, Dynamic and Thermal Properties of Aluminum Alloy A356/Silicon Carbide Hollow Particle Syntactic Foams, Metals 2014, Vol. 4, Pages 530-548. 4 (2014) 530–548. https://doi.org/10.3390/MET4040530.10.3390/met4040530 ↗
12. Characterization of Syntactic Foams — An Ultrasonic Approach
13. Spray drying handbook
14. G. Heinicke, F. Matthews, J.B. Schwartz, The Effects of Substrate Size, Surface Area, and Density on Coat Thickness of Multi-Particulate Dosage Forms, Http://Dx.Doi.Org/10.1081/PDT-49670. 10 (2008) 85–96. https://doi.org/10.1081/PDT-49670.10.1081/PDT-49670 ↗
15. Batch fluid-bed processing equipment: a design overview
16. R.M. Iyer, L.L. Augsburger, D.M. Parikh, Evaluation of Drug Layering and Coating: Effect of Process Mode and Binder Level, Http://Dx.Doi.Org/10.3109/03639049309062996. 19 (2008) 981–998. https://doi.org/10.3109/03639049309062996.10.3109/03639049309062996 ↗
17. Synthesis and characterization of polyimide thin films obtained by thermal evaporation and solid state reaction
18. Thermal and electrical properties of polyimide/PANI nanofiber composites prepared via in situ polymerization10.2478/msp-2018-0047 ↗
19. Influence methods of preparation on the thermal stability of polyimide/silica dust
20. Jaeckel · Coating of Polymeric Spheres with Particles · 1988
21. F. Bretschneider, B. Peter, J. Brucker, Machine and Process for Producing a Free Flowing Product with a Coat, (1999).
22. N. Shah, T. Mehta, R. Aware, V. Shetty, Investigation on influence of Wurster coating process parameters for the development of delayed release minitablets of Naproxen, Http://Dx.Doi.Org/10.1080/03639045.2017.1357732. 43 (2017) 1989–1998. https://doi.org/10.1080/03639045.2017.1357732.10.1080/03639045.2017.1357732 ↗
23. C.R. Duarte, J.L.V. Neto, M.H. Lisboa, R.C. Santana, M.A.S. Barrozo, V. v. Murata, Experimental study and simulation of mass distribution of the covering layer of soybean seeds coated in a spouted bed, Braz. J. Chem. Eng. 21 (2004) 59–67. https://doi.org/10.1590/S0104-66322004000100007.10.1590/S0104-66322004000100007 ↗
24. Fluidized bed coating in food technology10.1016/S0924-2244(99)00041-2 ↗
25. Coating of Pharmaceutical Powders by Fluidized Bed Process. II. : Microcapsules Produced by Layering of Fine Powder on Coarse Particles and Subsequent Aqueous Enteric Coating10.1248/cpb.36.1491 ↗
26. Wear and friction of polymer fiber composites coated by NiCr alloy
27. Production of hollow spheres (HS) and hollow sphere structures (HSS)10.1016/j.matlet.2009.01.015 ↗
28. O. Andersen, U. Waag, L. Schneider, G. Stephani, B. Kieback, Novel Metallic Hollow Sphere Structures**, (n.d.). https://doi.org/10.1002/(SICI)1527-2648(200004)2:4.
29. Batch and continuous fluid bed coating – review and state of the art10.1016/S0260-8774(01)00173-X ↗
30. Continuous pellet coating in a Wurster fluidized bed process10.1016/j.ces.2012.05.034 ↗
31. Monte Carlo simulations to determine coating uniformity in a Wurster fluidized bed coating process10.1016/j.powtec.2006.05.001 ↗
32. Feasibility of Protein Spray Coating Using a Fluid-Bed Würster Processor10.1002/(SICI)1097-0290(19970320)53:6<560::AID-BIT3>3.0.CO;2-K ↗
33. S. Bose, R.H. Bogner, Solventless Pharmaceutical Coating Processes: A Review, Http://Dx.Doi.Org/10.1080/10837450701212479. 12 (2008) 115–131. https://doi.org/10.1080/10837450701212479.10.1080/10837450701212479 ↗
34. Overview of Composite Metal Foams and Their Properties and Performance10.1002/adem.201600776 ↗
35. Comparison of organic solvent-based ethylcellulose coatings of KCl crystals applied by top and bottom spraying in fluidized-bed equipment10.1016/0378-5173(94)00095-6 ↗
36. D.E. Wurster, Particle coating process, (1964).
37. F.N. Christensen, P. Bertelsen, Qualitative Description of the Wurster-Based Fluid-Bed Coating Process, Http://Dx.Doi.Org/10.3109/03639049709148494. 23 (2008) 451–463. https://doi.org/10.3109/03639049709148494.10.3109/03639049709148494 ↗
38. Computational Fluid Dynamics-Discrete Element Method Modeling of an Industrial-Scale Wurster Coater10.1016/j.xphs.2018.10.016 ↗
39. Calibration-free in-line monitoring of pellet coating processes via optical coherence tomography10.1016/j.ces.2014.05.049 ↗
40. Microencapsulation of water-soluble macromolecules with acrylic terpolymers by the Wurster coating process for colon-specific drug delivery10.1016/j.powtec.2003.10.018 ↗
41. D. van Gough, J.L. Defino, P. v. Braun, Programmed size-selected permeation of ssDNA into ZnS mesoporous hollow spheres, Soft Matter. 8 (2012) 4396–4401. https://doi.org/10.1039/C2SM00053A.10.1039/c2sm00053a ↗
42. C. Körner, R.F. Singer, Processing of Metal Foams Ð Challenges and Opportunities, (n.d.). https://doi.org/10.1002/(SICI)1527-2648(200004)2:4.
43. Attenuation efficiency of X-ray and comparison to gamma ray and neutrons in composite metal foams10.1016/j.radphyschem.2015.07.003 ↗
44. Study of coating distribution onto metallic hollow particles10.1016/j.apsusc.2006.02.244 ↗
45. Fluidized bed coating efficiency and morphology of coatings for producing Al-based nanocomposite hollow spheres10.1007/s12613-014-1021-7 ↗
46. Processing and properties of Al-based powder suspension/slurry: A comparison study of aqueous binder systems, stability and film uniformity10.1016/j.powtec.2013.12.051 ↗
47. Aluminum Coated Micro Glass Spheres to Increase the Infrared Reflectance10.3390/coatings9030187 ↗
48. Coating noble metal nanocrystals (Ag, Au, Pd, and Pt) on polystyrene spheres via ultrasound irradiation10.1021/la047465d ↗
49. Spray drying formation of metal oxide (TiO2 or SnO2) nanoparticle coated boron particles in the form of microspheres and their physicochemical properties10.1016/j.jallcom.2019.151923 ↗
50. Ochsner · 2009
51. DEM–CFD modeling of a fluidized bed spray granulator10.1016/j.ces.2011.02.038 ↗
52. Effect of operation conditions on coating of pharmaceutical pellets with a film of HPMC/PEG in a Wurster coater10.1016/j.powtec.2019.06.027 ↗
53. Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process10.1016/j.cherd.2018.09.032 ↗
54. Melting point and heat of fusion of poly(vinyl alcohol)
55. Synergistic effect of heat treatment and reinforcement content on the microstructure and corrosion behavior of Al-7075 alloy based nanocomposites10.1016/j.jallcom.2020.157590 ↗
56. Preparation of polystyrene spheres in different particle sizes and assembly of the PS colloidal crystals10.1007/s11431-010-4110-5 ↗
57. Quantitative chemical composition of thin films with infrared spectroscopic ellipsometry: application to hydrated oxide films on aluminium10.1002/sia.1546 ↗
58. Mechanisms of polymeric film formation10.1016/j.ijpharm.2012.12.027 ↗
59. Toward an understanding of how red phosphorus and expandable graphite enhance the fire resistance of expandable polystyrene foams10.1002/app.49045 ↗
60. Structural, optical, opto-thermal and thermal properties of ZnS–PVA nanofluids synthesized through a radiolytic approach10.3762/bjnano.6.55 ↗
61. A new device for coating single particles under controlled conditions10.1016/j.ces.2005.03.026 ↗
62. A Study of Latex Film Formation by Atomic Force Microscopy. 1. A Comparison of Wet and Dry Conditions10.1021/la00007a063 ↗
63. Physicochemical and release properties of pellets coated with Kollicoat® SR 30 D, a new aqueous polyvinyl acetate dispersion for extended release10.1016/j.ijpharm.2004.10.024 ↗
64. Changes in epoxy-coated aluminium due to exposure to water10.1016/j.porgcoat.2004.07.022 ↗
65. Effect of glycerin on electrical and thermal properties of PVA/copper sulphate gel polymer electrolytes10.1007/s10904-022-02417-7 ↗
66. Y. Fukumori, Y. Yamaoka, H. Ichikawa, T. Fukuda, Y. Takeuchi, Y. Osako, Coating of Pharmaceutical Powders by Fluidized Bed Process. II. : Microcapsules Produced by Layering of Fine Powder on Coarse Particles and Subsequent Aqueous Enteric Coating, Chem. Pharm. Bull. (Tokyo). 36 (1988) 1491–1501. https://doi.org/10.1248/CPB.36.1491.10.1248/cpb.36.1491 ↗
67. M. Foroughi-Dahr, N. Mostoufi, R. Sotudeh-Gharebagh, Particle Coating in Fluidized Beds, Chemistry, Mol. Sci. Chem. Eng. (2017) 1–17. https://doi.org/10.1016/B978-0-12-409547-2.12206-1.10.1016/B978-0-12-409547-2.12206-1 ↗
68. The detailed analysis of the spray time effects of the aluminium coating using self-generated atmospheric plasma spray system on the microstructure and corrosion behaviour10.1016/j.rinp.2017.04.014 ↗
69. Thermal spray deposition of aluminum and zinc coatings on thermoplastics10.1016/j.surfcoat.2020.126114 ↗
70. Remarkable enhancement in dielectric constant and band gap shrinkage of hydrothermal grown fly ash waste derived zeolite nanoneedles10.1016/j.physb.2022.413817 ↗