RETRACTED: A quick, easy and green hydrothermal method for the development of a bioanode based on a ternary nanocomposite for enzymatic biofuel cell applications
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
The performance of an enzymatic biofuel cell (EBFC) is very much related to the electrode architecture. Thus, designing a new electrode material by employing nanotechnology broadens the horizon in this field. In this study, a new bioanode is constructed using reduced graphene oxide (RGO) and zinc oxide nanoparticles (ZnO NPs) in polyindole (PIN) matrix for the EBFC system to achieve easy shuttling of electrons between enzyme (glucose oxidase, GOx) and the surface of electrode. The prepared ZnO/RGO/PIN nanocomposite (NC) was assessed by analytical techniques including fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and the electrochemical activity of the NC and ZnO/RGO/PIN/FRT/GOx bioanode was evaluated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV). The bioanode attained a maximum current density of ca. 8.1 mA cm −2 at 50 mM glucose concentration and 100 mV s −1 scan rate. Moreover, the nanocomposite has a unique combination synthesized by the green route which is one of the eco-friendly and novel methodologies for the preparation along with less production cost from the previous chemical route. Besides, this combination offers enhanced electrical conductivity, improved electron transportation, and provides a large number of active sites due high aspect ratio along with biocompatibility. These advantages make this nanocomposite valuable in designing bioanode for this application. To the best of our knowledge, this bioanode is being proposed for the first time.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Electrochemical Analysis and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Nanoengineered material based biosensing electrodes for enzymatic biofuel cells applications
2. Enzymatic electrodes nanostructured with functionalized carbon nanotubes for biofuel cell applications10.1007/s00216-010-4012-1 ↗
3. High-performance enzymatic biofuel cell based on flexible carbon cloth modified with MgO-templated porous carbon10.1016/j.jpowsour.2019.04.064 ↗
4. Exploring the shape and distribution of electrodes in membraneless enzymatic biofuel cells for high power output10.1016/j.ijhydene.2021.02.150 ↗
5. S. ul Haque, N. Duteanu, S. Ciocan, A. Nasar, Inamuddin, A review: Evolution of enzymatic biofuel cells, J. Environ. Manage. 298 (2021) 113483. Doi: 10.1016/j.jenvman.2021.113483.10.1016/j.jenvman.2021.113483 ↗
6. Development of a ternerry condunting composite (PPy/Au/CNT@Fe3O4) immobilized FRT/GOD bioanode for glucose/oxygen biofuel cell applications10.1016/j.ijhydene.2020.02.175 ↗
7. High-performance biofuel cell made with hydrophilic ordered mesoporous carbon as electrode material10.1016/j.jpowsour.2010.01.071 ↗
8. A shriveled rectangular carbon tube with the concave surface for high-performance enzymatic glucose/O2 biofuel cells10.1016/j.bios.2019.02.044 ↗
9. Three-Dimensional Graphene-Carbon Nanotube Hybrid for High-Performance Enzymatic Biofuel Cells10.1021/am405432b ↗
10. Inamuddin, Cherry-like Pt@Fe3O4 decorated MWCNT/PANI nanohybrid based bioanode for glucose biofuel cell application10.1016/j.fuel.2023.127579 ↗
11. Recent trends in nanomaterial-modified electrodes for electroanalytical applications, TrAC10.1016/j.trac.2018.11.044 ↗
12. Enhancing power generation and treatment of dairy waste water in microbial fuel cell using Cu-doped iron oxide nanoparticles decorated anode10.1016/j.energy.2019.01.102 ↗
13. Nanostructured titanium oxide hybrids-based electrochemical biosensors for healthcare applications10.1016/j.colsurfb.2019.03.013 ↗
14. Nickel oxide nanoparticles supported onto oriented multi-walled carbon nanotube as electrodes for electrochemical capacitors10.1016/j.electacta.2018.12.102 ↗
15. Inamuddin, ZnS quantum dots decorated on one-dimensional Scaffold of MWCNT/PANI conducting nanocomposite as an anode for enzymatic biofuel cell10.3390/polym14071321 ↗
16. A.S. Dixit, Anand V. Patwardhan and Aniruddha B. Pandit, PARAMETER OPTIMIZATION OF PRODIGIOSIN BASEDDYE-SENSITIZED SOLAR CELL, Int. J. Pharm. Chem. Biol. Sci. 1 (2021) 19–29.
17. Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization10.1016/j.desal.2022.116360 ↗
18. Cactus-like iron oxide/carbon porous microspheres lodged in nitrogen-doped carbon nanotubes as anodic electrode materials of lithium ion batteries10.1039/D2NJ05404C ↗
19. Sensitive riboflavin sensing using silver nanoparticles deposited onto screen-printed electrodes via controlled-energy spark discharges10.1016/j.talanta.2023.124409 ↗
20. Silver nanoparticle-modified graphite pencil electrode for sensitive electrochemical detection of chloride ions in pharmaceutical formulations10.4314/bcse.v37i2.17 ↗
21. Das, synthesis of doped zinc oxide nanoparticles: a review10.1016/j.matpr.2019.03.041 ↗
22. Understanding effect of solution chemistry on heteroaggregation of zinc oxide and copper oxide nanoparticles10.1016/j.chemosphere.2019.06.171 ↗
23. A brief review of structural, electrical and electrochemical properties of zinc oxide nanoparticles10.1515/rams-2018-0009 ↗
24. Graphene oxide decorated with zinc oxide nanoflower, silver and titanium dioxide nanoparticles: fabrication, characterization, DNA interaction, and antibacterial activity10.1039/C8RA09788G ↗
25. Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites10.1016/j.compositesb.2017.09.012 ↗
26. Functionalized magnetic nanoparticle-reduced graphene oxide nanocomposite for enzymatic biofuel cell applications10.1016/j.ijhydene.2019.09.037 ↗
27. Hydrothermally synthesized defective NiMoSe2 nanoplates decorated on the surface of functionalized SWCNTs doped polypyrrole scaffold for enzymatic biofuel cell applications10.1016/j.ijhydene.2020.04.144 ↗
28. Inamuddin, N. Shakeel, M. Imran Ahamed, S. Kanchi, H. Abbas Kashmery, Green synthesis of ZnO nanoparticles decorated on polyindole functionalized-MCNTs and used as anode material for enzymatic biofuel cell applications, Sci. Rep. 10 (2020) 5052. Doi: 10.1038/s41598-020-61831-4.10.1038/s41598-020-61831-4 ↗
29. Biocompatible conductive polymers with high conductivity and high stretchability10.1021/acsami.9b07325 ↗
30. Research progress on conducting polymer-based biomedical applications10.3390/app9061070 ↗
31. Polyaniline-based nanocomposites for electromagnetic interference shielding applications: a review10.1177/08927057211022408 ↗
32. Synthesis of conductive polyaniline composites for superior electromagnetic wave absorption with lightweight and broad bandwidth10.1002/adem.202200976 ↗
33. Polypyrrole coated carbon nanotube aerogel composite phase change materials with enhanced thermal conductivity, high solar-/electro- thermal energy conversion and storage10.1016/j.jcis.2022.09.103 ↗
34. Recent advances of polypyrrole conducting polymer film for biomedical application: Toward a viable platform for cell-microbial interactions10.1016/j.cis.2023.102860 ↗
35. H. Humayun, B. Begum, S. Bilal, A. ul H.A. Shah, P. Röse, Polyindole Embedded Nickel/Zinc Oxide Nanocomposites for High-Performance Energy Storage Applications, Nanomaterials. 13 (2023) 618. Doi: 10.3390/nano13030618.10.3390/nano13030618 ↗
36. Polyindole and polypyrrole as a sustainable platform for environmental remediation and sensor applications10.1039/D2MA00022A ↗
37. Kim, Recent advances and remaining challenges for polymeric nanocomposites in healthcare applications10.1016/j.progpolymsci.2018.03.001 ↗
38. Inamuddin, Gold nanoparticles decorated on reduced graphene oxide as a supporting material for enzymatic bioanode
39. A.M. Pillai, V.S. Sivasankarapillai, A. Rahdar, J. Joseph, F. Sadeghfar, R. Anuf A, K. Rajesh, G.Z. Kyzas, Green synthesis and characterization of zinc oxide nanoparticles with antibacterial and antifungal activity, J. Mol. Struct. 1211 (2020) 128107. Doi: 10.1016/j.molstruc.2020.128107.10.1016/j.molstruc.2020.128107 ↗
40. Facile synthesis of RGO-Fe2O3 nanocomposite: A novel catalyzing agent for composite propellants10.1007/s10854-020-04593-z ↗
41. Biocatalytic synthesis of fluorescent conjugated indole oligomers10.3390/bioengineering1040246 ↗
42. Synthesis and characterization of zinc oxide nanoparticles for application in the detection of fingerprints10.4028/www.scientific.net/MSF.916.232 ↗
43. Synthesis, characterization, and antibacterial activity of polyindole/Ag–Cuo nanocomposites by reflux condensation method10.1080/03602559.2017.1410832 ↗
44. Preparation and characterization of a bioanode (GC/MnO2/PSS/Gph/Frt/GOx) for biofuel cell application10.1016/j.ijhydene.2019.01.088 ↗
45. A glucose biosensor based on glucose oxidase immobilized on ZnO/Cu 2 O graphene oxide nanocomposite electrode10.1149/2.020405jes ↗
46. Application of graphene nanocomposite in motion sensing of human body10.7546/ijba.2018.22.4.349-362 ↗
47. Kraton based polymeric nanocomposite bioanode for the application in a biofuel cell10.1016/j.enzmictec.2019.04.003 ↗
48. Shakeel, Optimization of rGO-PEI/Naph-SH/AgNWs/Frt/GOx nanocomposite anode for biofuel cell applications10.1038/s41598-020-65712-8 ↗