journal article·2022-09

Effect of micro-impeller geometries on mixing in a continuous flow active microreactor

Sulaxna Pandey, Dhananjay Bodas

Publisher page

Abstract

Microreactors are widely reported for performing chemical reactions of all kinds. Chemical reactions should possess attributes like complete mixing with a faster rate to obtain a high-quality product. Usually, microreactors mix the liquid passively and thus suffer from slow mixing rates due to longer channels. Moreover, it is challenging to achieve complete mixing of fluids in passive microreactors as they are predominantly diffusion dependent. An active microreactor is suitable to enhance the rate of mixing and its efficiency. In the present work, we have utilized the magnetic field to rotate a micro-impeller in an active microreactor. The active microreactor and micro-impellers (iron oxide nanoparticles embedded in PDMS matrix) of various geometry (triangle, square, rectangle, and rhombus) were fabricated using soft lithography. These differently shaped micro-impellers were evaluated theoretically and experimentally for mixing in a continuous flow active microreactor. Simulation studies using Comsol Multiphysics revealed approximately equivalent mixing efficiency for all the shapes; however, rhombus micro-impeller excelled. Further, experimental studies showed better mixing efficiency of rhombus micro-impeller as compared to other micro-impellers. 97% mixing efficiency for rhombus micro-impeller can be attributed to the shape and its stability in continuous flow. Finally, the rhombus micro-impeller was used to synthesize Prussian blue nanoparticles in a continuous flow active microreactor.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microfluidic and Capillary Electrophoresis Applications · Innovative Microfluidic and Catalytic Techniques Innovation · Microfluidic and Bio-sensing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. P.M. Doran, Mixing, in: Bioprocess Eng. Princ., Elsevier, 2013: pp. 255–332. https://doi.org/10.1016/B978-0-12-220851-5.00008-3.10.1016/B978-0-12-220851-5.00008-3 ↗
2. Efficient Mixing of Microfluidic Chip with a Three-Dimensional Spiral Structure10.1021/acsomega.1c06352 ↗
3. Millifluidic synthesis of cadmium sulfide nanoparticles and their application in bioimaging10.1039/C7RA05401G ↗
4. High-quality quantum dots for multiplexed bioimaging: A critical review10.1016/j.cis.2020.102137 ↗
5. D. Gobby, P. Angeli, A. Gavriilidis, Mixing characteristics of T-type microfluidic mixers, J. MICROMECHANICS MICROENGINEERING Www.Iop.Org/Journals/Jm. 11 (2001) 126–132. https://doi.org/http://iopscience.iop.org/0960-1317/11/2/307.10.1088/0960-1317/11/2/307 ↗
6. Optimization of interdigital micromixers via analytical modeling - exemplified with the SuperFocus mixer10.1016/j.cej.2003.10.023 ↗
7. Combinatorial mixing of microfluidic streams10.1039/B314962E ↗
8. Design
9. Active mixing of complex fluids at the microscale10.1073/pnas.1509224112 ↗
10. P.M. Doran, Fluid Flow, in: Bioprocess Eng. Princ., Elsevier, 2013: pp. 201–254. https://doi.org/10.1016/B978-0-12-220851-5.00007-1.10.1016/B978-0-12-220851-5.00007-1 ↗
11. Micromixers—a review on passive and active mixing principles10.1016/j.ces.2004.11.033 ↗
12. Mixing high-viscosity fluids via acoustically driven bubbles10.1088/0960-1317/27/1/015008 ↗
13. Impeller characterization and selection: Balancing efficient hydrodynamics with process mixing requirements10.1002/aic.12758 ↗
14. Impeller design for an axial-flow pump based on multi-objective optimization, Indian J. Eng
15. W.F. Fang, J.T. Yang, High performance microreactor for rapid fluid mixing and redox reaction of ascorbic acid, in: 2008 Symp. Des. Test, Integr. Packag. MEMS/MOEMS, IEEE, 2008: pp. 285–288. https://doi.org/10.1109/DTIP.2008.4753002.10.1109/DTIP.2008.4753002 ↗
16. Micro magnetic stir-bar mixer integrated with parylene microfluidic channels10.1039/b403305a ↗
17. Rapid mixing of sub-microlitre drops by magnetic micro-stirring10.1039/c1lc20354a ↗
18. Synthesis of Monodisperse Chitosan Nanoparticles and in Situ Drug Loading Using Active Microreactor10.1021/acsami.5b05100 ↗
19. Magnetically Active Micromixer Assisted Synthesis of Drug Nanocomplexes Exhibiting Strong Bactericidal Potential10.1016/j.msec.2016.06.015 ↗
20. Application of reactor engineering concepts in continuous flow chemistry: A review, React
21. Square-well mixtures revisited: computer simulation, mixing rules and one-fluid theory10.1080/08927022.2019.1677903 ↗
22. Synthesis of Prussian blue nanoparticles with a hollow interior by controlled chemical etching10.1002/anie.201105190 ↗
23. Facile synthesis of novel Prussian blue-lipid nanocomplexes10.3390/molecules24224137 ↗
24. Chitosan nanoparticles synthesis caught in action using microdroplet reactions10.1038/srep22260 ↗