Fabrication and electromechanical performance of carbon nanotube based conductive membrane and its application in real-time multimode strain detection in composites
Source abstract
Abstract
In this study, a flexible conductive membrane (CM) consisting of a network of carbon nanotubes is produced and the electromechanical behavior of this CM was studied experimentally and the gauge factor (GF) of CM was in the 8–8.25 range. Then, a multi-mode strain detection is carried out in composites using this CM sensor. The CM is embedded gradually at directions i.e. 0°, +45°, 90°, −45° between the plies for real-time/in-situ strain monitoring. The composite specimens are then cut in star profile and then tested under tensile and bending cyclic loading. There is a good reproducibility in the results and the mechanical response of composite correlated perfectly with the electrical resistance of the CM sensor however, a sensor in each position showed distinct behavior. The results established that the CM sensor exhibited good potential as a flexible strain sensor for in-situ monitoring of composites and can provide detection over a large section and unapproachable locations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Analytical Chemistry and Sensors · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. J. Farringdon, “Wearable electronics and clothing from Philips and Levi,” vol. 10, pp. 22–24, 2001.
2. Flexible technologies and smart clothing for citizen medicine, home healthcare, and disease prevention10.1109/TITB.2005.854505 ↗
3. “Universal Serial Fabric Bus, US Army Natick Soldier Systems Center.,” 2013. [Online]. Available: https://www3.natick.army.mil/docs/W911QY-15-R-0016-0001 with Forms.pdf.
4. C. Simon, E. Potter, M. McCabe, and C. Baggerman, “Smart fabrics technology development,” 2010. [Online]. Available: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20100042366.pdf.
5. Structural health monitoring techniques for aircraft composite structures10.1016/j.paerosci.2010.05.001 ↗
6. Structural health monitoring techniques for wind turbine blades10.1016/S0167-6105(99)00132-4 ↗
7. A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
8. Development of microscale flexible nylon/Ag strain sensor wire for real-time monitoring and damage detection in composite structures subjected to three-point bend test10.1016/j.compscitech.2019.107693 ↗
9. Development of microscale flexible nylon/Ag strain sensor wire for real-time monitoring and damage detection in composite structures subjected to three-point bend test10.1016/j.compscitech.2019.107693 ↗
10. Real-time strain monitoring performance of flexible Nylon/Ag conductive fiber10.1016/j.sna.2019.06.036 ↗
11. Y. Qureshi, M. Tarfaoui, K. K. Lafdi, and K. Lafdi, “Real-time strain monitoring and damage detection of composites in different directions of the applied load using a microscale flexible Nylon/Ag strain sensor,” Struct. Heal. Monit., vol. 19, no. 3, pp. 885–901, 10.1177/1475921719869986.10.1177/1475921719869986 ↗
12. Y. Qureshi, M. Tarfaoui, K. K. Lafdi, and K. Lafdi, “In-situ Monitoring, Identification and Quantification of Strain Deformation in Composites under Cyclic Flexural Loading using Nylon/Ag Fiber Sensor,” IEEE Sens. J., p. 1, 2020, 10.1109/JSEN.2020.2969329.10.1109/JSEN.2020.2969329 ↗
13. Monitoring a delamination in a laminated composite beam using in-situ measurements and parametric identification10.1016/j.jsv.2006.07.026 ↗
14. Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring10.1177/147592170200100104 ↗
15. An Integrated Health Monitoring Technique Using Structural Impedance Sensors10.1106/QXMV-R3GC-VXXG-W3AQ ↗
16. Structural health monitoring for a wind turbine system: a review of damage detection methods10.1088/0957-0233/19/12/122001 ↗
17. Health Monitoring Aircraft10.1177/1045389X9000100307 ↗
18. An introduction to structural health monitoring10.1098/rsta.2006.1928 ↗
19. Structural health monitoring of smart composite materials by using EFPI and FBG sensors10.1016/S0924-4247(02)00429-6 ↗
20. Staszewski · 2004
21. Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures — a review10.1006/jsvi.1999.2624 ↗
22. Review of guided-wave structural health monitoring10.1177/0583102406075428 ↗
23. S.W. Doebling, C.R. Farrar, M.B. Prime, D.W. Shevitz, Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review, 10.2172/249299.
24. Lamb wave propagation in varying isothermal environments10.1177/1475921708090564 ↗
25. Design of intelligent materials with self-diagnosing function for preventing fatal fracture10.1088/0964-1726/1/4/007 ↗
26. Sensing damage in carbon fiber and its polymer-matrix and carbon-matrix composites by electrical resistance measurement10.1023/A:1004629505992 ↗
27. Piezoresistivity in continuous carbon fiber polymer-matrix composite10.1002/pc.10160 ↗
28. S. Nauman, I. Cristian, F. Boussu, and V. Koncar, “Smart Sensors for Industrial Applications. Part V Piezoresistive, Wireless, and Electrical Sensors,” USA,: K. Iniewski, 2013.
29. Carbon nanotubes based strain sensors10.1016/j.measurement.2012.02.003 ↗
30. A carbon nanotube strain sensor for structural health monitoring10.1088/0964-1726/15/3/009 ↗
31. Real-time in situ sensing of damage evolution in advanced fiber composites using carbon nanotube networks10.1088/0957-4484/19/21/215713 ↗
32. Piezoresistance of carbon nanotubes on deformable thin-film membranes10.1063/1.1872221 ↗
33. Alamusi, N. Hu, H. Fukunaga, S. Atobe, Y. Liu, and J. Li., “Piezoresistive strain sensors made from carbon nanotubes based polymer nanocomposites,” Sensors, vol. 11, pp. 10691–10723..10.3390/s111110691 ↗
34. Nanotube film based on single-wall carbon nanotubes for strain sensing10.1088/0957-4484/15/3/026 ↗
35. Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor10.1016/j.actamat.2008.02.030 ↗
36. N. Hu, Y. Karube, M. Arai, T. Watanabe, C. Yan, and Y. Li., Investigation on sensitivity of polymer/carbon nanotube composite strain sensor. Carbon N. Y., vol. 48, no. 680–687, 2010.10.1016/j.carbon.2009.10.012 ↗
37. Performance characterization of {VGCF}/epoxy nanocomposite sensors under static load cycles and in static structural health monitoring10.1088/0964-1726/22/4/045008 ↗
38. Delamination detection with carbon nanotube thread in self-sensing composite materials10.1016/j.compscitech.2010.02.022 ↗
39. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
40. Damage detection of three-dimensional braided composite materials using carbon nanotube thread10.1515/secm-2013-0284 ↗
41. Smart wearable kevlar-based safeguarding electronic textile with excellent sensing performance10.1039/C7SM00095B ↗
42. Superhydrophobic Electrically Conductive Paper for Ultrasensitive Strain Sensor with Excellent Anticorrosion and Self-Cleaning Property
43. Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers10.1039/C6NR02216B ↗
44. Calculation of the field enhancement for a nanotube array and its emission properties10.1063/1.3091282 ↗
45. Effect of purity, edge length, and growth area on field emission of multi-walled carbon nanotube emitter arrays10.1063/1.4807916 ↗
46. Local probing of the field emission stability of vertically aligned multi-walled carbon nanotubes10.1016/j.carbon.2008.12.035 ↗
47. A local field emission study of partially aligned carbon-nanotubes by atomic force microscope probe10.1016/j.carbon.2007.09.049 ↗
48. Effect of patterned and aligned carbon nanotubes on field emission properties10.1016/j.vacuum.2011.07.047 ↗
49. Field emission properties of as-grown multiwalled carbon nanotube films10.1016/j.carbon.2011.08.015 ↗
50. Emitter spacing effects on field emission properties of laser-treated single-walled carbon nanotube buckypapers10.1088/0957-4484/21/49/495702 ↗
51. Nanotip formation on a carbon nanotube pillar array for field emission application10.1063/1.2996283 ↗
52. Area effect of patterned carbon nanotube bundle on field electron emission characteristics10.1016/j.apsusc.2008.02.020 ↗
53. Enhanced field emission from aligned multistage carbon nanotube emitter arrays10.1088/0957-4484/19/6/065605 ↗
54. Enhanced field emission and improved supercapacitor obtained from plasma-modified bucky paper10.1002/smll.201002330 ↗
55. Printable thin film supercapacitors using single-walled carbon nanotubes10.1021/nl8038579 ↗
56. Impedimetric genosensors employing COOH-modified carbon nanotube screen-printed electrodes10.1016/j.bios.2009.02.023 ↗
57. Carbon nanotube-based neat fibers10.1016/S1748-0132(08)70062-8 ↗
58. Carbon nanotube actuators10.1126/science.284.5418.1340 ↗
59. Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors10.1016/j.carbon.2013.08.058 ↗