Piezoelectric properties of 3-1 type porous PMN-PZT ceramics doped with strodium
Source abstract
Abstract
Abstract In this work, 3-1 type porous lead magnesium niobate-lead zirconate titanate (PMN-PZT) ceramics with one-dimensional ordered pore channels and strontium oxides (SrO) doping on a molecular level have been fabricated by the ionotropic gelation of sodium alginate/PMN-PZT suspensions with SrCl2 solution. By adjusting the concentration of SrCl2 (0.5–2.5 mol/L), the doping amount of SrO in 3-1 type PMN-PZT ceramics increased from 1.954 wt% to 4.052 wt%, making the morphotropic phase boundary (MPB) deviate from rhombohedral (R3m) to tetragonal (P4mm) phase with the decrease in the ratio of the lattice parameters c/a. Increase in the concentration of SrCl2 led to a reduction in the tanδ, an increase in the d33 and e33. As a result, the prepared samples possessed a maximal hydrostatic figure of merit (HFOM) value of 5045 × 10−15 Pa−1, and a low acoustic impedance (Z) value of 5.88 MRayls, making them promising candidates for application in ultrasonic transformers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Piezoelectric behavior of (1–x)(PbMgNbO3–PbZrTiO3)–x(BaTiO3) ceramics for energy harvester applications10.1016/j.ceramint.2013.07.062 ↗
2. Study of microstructure and dielectric properties of PMN–PZT ceramics via a mixed powder method including sol–gel precursor10.1016/j.jallcom.2008.09.136 ↗
3. Synthesis of pyrochlore free PMN–PZT ceramics via a seeding method10.1016/j.sna.2007.10.005 ↗
4. High piezoelectric sensitivity and hydrostatic figures of merit in unidirectional porous ferroelectric ceramics fabricated by freeze casting10.1016/j.jeurceramsoc.2018.04.067 ↗
5. Processing and properties of porous PZT ceramics from particle-stabilized foams via gel casting10.1111/jace.12250 ↗
6. Effects of dopants on the microstructure and phase-purity control in PMN-PT ceramics10.1016/j.ceramint.2018.06.265 ↗
7. Preparation and properties of 3–1 type PZT ceramics by a self-organization method10.1016/j.jeurceramsoc.2015.06.007 ↗
8. Piezoelectric and mechanical properties of CaO reinforced porous PZT ceramics with one-dimensional pore channels10.1016/j.ceramint.2016.10.181 ↗
9. Preparation and properties of porous PMN-PZT ceramics doped with strontium10.1016/j.mseb.2006.08.039 ↗
10. Effect of Zn, Sr, and Y addition on electrical properties of PZT thin films10.1111/j.1551-2916.2005.00839.x ↗
11. Al2O3 ceramics with well-oriented and hexagonally ordered pores: the formation of microstructures and the control of properties10.1016/j.jeurceramsoc.2012.04.013 ↗
12. Electrostatically assembled multilayered films of biopolymer enhanced nanocapsules for on-demand drug release10.1021/acsabm.9b00381 ↗
13. Temperature-responsive multilayer films of micelle-based composites for controlled release of a third-generation EGFR inhibitor10.1021/acsapm.9b01051 ↗
14. Increasing capillary diameter and the incorporation of gelatin enhance axon outgrowth in alginate-based anisotropic hydrogels10.1016/j.actbio.2011.04.006 ↗
15. Structural phase transition and electrical properties of Sr2+ substituted porous PMN-PZT ceramics10.1111/jace.15447 ↗
16. Dielectric properties of lead-magnesium niobate ceramics10.1111/j.1151-2916.1984.tb19528.x ↗
17. Effect of PMN modification on structure and electrical response of xPMN–(1–x)PZT ceramic systems10.1016/S0955-2219(02)00281-9 ↗
18. Self-organized structural hierarchy in mixed polysaccharide sponges10.1039/b907916e ↗
19. Dielectric behavior of lead zirconate titanate/silver composites10.1016/j.matchemphys.2005.08.034 ↗
20. Low-temperature property investigation of the lead indium-niobate–lead nickel-niobate solid solution10.1016/S0022-3697(01)00263-3 ↗