Electrical properties of zinc sulfide and silver sulfide as binary salts in gel polymer electrolytes for quantum Dot-Sensitized solar cells
Source abstract
Abstract
Gel polymer electrolytes (GPEs) with methyl cellulose (MC) polymer host have been prepared by solution casting. Succinonitrile (SN) is the plasticizer. ZnS and Ag 2S are the sulfide salts added. The ZnS:Ag 2S weight ratio has been varied. The crystallinity of MC:SN:co-ZnS-Ag 2S:S has been investigated using X-ray Diffraction (XRD). The use of two cations from two different salts has decreased crystallinity of the GPEs and the. The MC:SN:(ZnS:Ag 2S = 80:20):S GPE exhibited the lowest degree of crystallinity of 21.18 %. Ionic conductivity and dielectric studies have been studied using electrochemical impedance spectroscopy (EIS). MC:SN:(ZnS:Ag 2S = 80:20):S electrolyte demonstrated the highest ionic conductivity at room temperature. The value is 6.93 × 10 -2 S.cm −1. The activation energy is 0.23 eV. The cell FTO/ZnOFe 2O 4/CdS/MC:SN:(ZnS:Ag 2S = 80:20):S/GPE/Pt/FTO has been assembled and characterized. The efficiency obtained is 0.58 % with short current density ( Jsc) of 2.15 mA.cm −2, open circuit voltage ( Voc) of 0.48 V and fill factor ( FF) of 0.56.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Optimizing photovoltaic performance in CuInS2 and CdS quantum dot-sensitized solar cells by using an agar-based gel polymer electrolyte10.1039/C6RA27635K ↗
2. Recent advances in quantum dot-sensitized solar cells: insights into photoanodes, sensitizers, electrolytes and counter electrodes10.1039/C7SE00137A ↗
3. The prospects and challenges of solar electrochemical capacitors
4. Boosting the efficiency of quantum dot sensitized solar cells through modulation of interfacial charge transfer10.1021/ar200315d ↗
5. Polyacrylonitrile/polyindole and poly (glycidyl methacrylate)/polyindole composites based quasi solid electrolyte materials for dye sensitized solar cells10.1016/j.solener.2020.12.039 ↗
6. Dextran based highly conductive hydrogel polysulfide electrolyte for efficient quasi-solid-state quantum dot-sensitized solar cells10.1016/j.electacta.2013.01.025 ↗
7. Z, Osman, N.H, Zainol, S.M, Samin, W.G, Chong, K.M, Isa, L, Othman, I, Supa’At, F, Sonsudin, Electrochemical impedance spectroscopy studies of magnesium-based polymethylmethacrylate gel polymer electrolytes,Electrochimica acta131(2014) pp.148-153. https://doi.org/10.1016/j.electacta.2013.11.189.10.1016/j.electacta.2013.11.189 ↗
8. Improving the conductivity of solid polymer electrolyte by grain reforming10.1186/s11671-020-03355-4 ↗
9. Highly efficient and stable quasi-solid-state quantum dot-sensitized solar cells based on a superabsorbent polyelectrolyte10.1039/C5TA08209A ↗
10. Review on mixed cation effect in gel polymer electrolytes for quasi solid-state dye-sensitized solar cells10.1007/s11581-020-03668-5 ↗
11. Efficiency enhancement in dye sensitized solar cells using gel polymer electrolytes based on a tetrahexylammonium iodide and MgI2 binary iodide system10.1039/c2cp24139k ↗
12. Effects of size and phase of TiO2 in poly (vinyl alcohol)-based gel electrolyte on energy storage ability of flexible capacitive supercapacitors
13. Rheological behavior of PAN-based electrolytic gel containing tetrahexylammonium and magnesium iodide for photoelectrochemical applications10.1007/s00397-013-0727-1 ↗
14. Properties of indium doped nanocrystalline ZnO thin films and their enhanced gas sensing performance10.1039/C5RA10919A ↗
15. Electrical and optical properties of TiO2 anatase thin films10.1063/1.356306 ↗
16. Studies and correlation among the structural, optical and electrical parameters of spray- deposited tin oxide (SnO2) thin films with different substrate temperatures10.1016/j.physb.2008.06.023 ↗
17. Absorption edge shift in ZnO thin films at high carrier densities10.1016/0038-1098(81)90224-6 ↗
18. Measurement method for carrier concentration in TiO2 via the Mott-Schottky approach10.1016/j.tsf.2010.10.071 ↗
19. H, Mun, H, Yang, J, Park, C, Ju, K, Char, 2015. High electron mobility in epitaxial SnO2−x in semiconducting regime.APL Materials,310.1063/1.4927470 ↗
20. (7) (2015) 076107.https://doi.org/10.1063/1.4927470.10.1063/1.4927470 ↗
21. Surface engineering of ZnO nanostructures for semiconductor-sensitized solar cells10.1002/adma.201400403 ↗
22. Few-layer MoSe2 possessing high catalytic activity towards iodide/tri-iodide redox shuttles
23. Carbon nanotubes with titanium nitride as a low-cost counter-electrode material for dye-sensitized solar cells10.1002/anie.201000659 ↗
24. A review on counter electrode materials in dye-sensitized solar cells10.1039/C3TA13374E ↗
25. A quasi-quantum well sensitized solar cell with accelerated charge separation and collection10.1021/ja403756s ↗
26. Effects of solvent and copper-doping on polyaniline conducting polymer and its application as a counter electrode for efficient and cost-effective dye-sensitized solar cells10.1016/j.synthmet.2015.12.006 ↗
27. Dye-sensitized solar cells based on poly (3, 4-ethylenedioxythiophene) counter electrode derived from ionic liquids10.1039/b920210b ↗
28. A flexible carbon counter electrode for dye-sensitized solar cells10.1016/j.carbon.2009.05.028 ↗
29. Penternary chalcogenides nanocrystals as catalytic materials for efficient counter electrodes in dye-synthesized solar cells10.1038/srep29207 ↗
30. Gel electrolytes with I−/I3− redox mediator based on methylcellulose for dye-sensitized solar cells10.1016/j.optmat.2018.03.064 ↗
31. A method based on impedance spectroscopy to determine transport properties of polymer electrolytes10.1039/C3CP53830C ↗
32. Polyacrylonitrile gel polymer electrolyte based dye sensitized solar cells for a prototype solar panel10.1016/j.electacta.2017.08.129 ↗
33. Noor · 2016 · 250
34. Conductivity studies of poly (ethylene oxide)(PEO)/poly (vinyl alcohol)(PVA) blend gel polymer electrolytes for dye-sensitized solar cells10.1007/s11581-016-1758-2 ↗
35. T, Sugumaran, D, S, Silvaraj, N, M, Saidi, N, K, Farhana, S, Ramesh, K, Ramesh, The conductivity and dielectric studies of polymer electrolytes based on iota-carrageenan with sodium iodide and 1-butyl-3-methylimidazolium iodide for the dye-sensitized solar cells,Ionics25 (2) (2019) 763-771.https://doi.org/10.1007/s11581-018-2756-3.10.1007/s11581-018-2756-3 ↗
36. Biopolymer materials based carboxymethyl cellulose as a proton conducting biopolymer electrolyte for application in rechargeable proton battery10.1016/j.electacta.2014.02.074 ↗
37. Comparison between silver sulfide and cadmium sulfide quantum dots in ZnO and ZnO/ZnFe2O4 photoanode of quantum dots sensitized solar cells10.1007/s11581-022-04471-0 ↗
38. Solid polymer electrolytes based on methylcellulose: FT-IR and ionic conductivity studies
39. P. T, Liu, X. M, Wei, Z, Liu, Miscibility study of chitosan and methylcellulose blends, in:J. Bu and Y. H. Kim, Advanced Materials ResearchVol. 750,. Trans Tech Publications Ltd (2013) 802-805. https://doi.org/10.4028/www.scientific.net/AMR.750-752.802.10.4028/www.scientific.net/AMR.750-752.802 ↗
40. Effect of the potassium iodide in tetrapropyl ammonium iodide-polyvinyl alcohol based gel polymer electrolyte for dye-sensitized solar cells10.1016/j.ijleo.2021.167978 ↗
41. Biopolymeric electrolyte based on glycerolized methyl cellulose with NH4Br as proton source and potential application in EDLC10.1007/s11581-017-2330-4 ↗
42. Effects of potassium iodide (KI) on crystallinity, thermal stability, and electrical properties of polymer blend electrolytes (PVC/PEO: KI)10.1016/j.ssi.2015.07.002 ↗
43. Modifying poly (vinyl alcohol)(PVA) from insulator to small-bandgap polymer: a novel approach for organic solar cells and optoelectronic devices10.1007/s11664-015-4191-9 ↗
44. R.T, Abdulwahid, O.G, Abdullah, S.B, Aziz, S.A, Hussein, F.F, Muhammad, Yahya, M.Y, The study of structural and optical properties of PVA: PbO2 based solid polymer nanocomposites, Journal of Materials Science: Materials in Electronics, 27 (11) (2016) 12112-12118. https://doi.org/10.1007/s10854-016-5363-y.10.1007/s10854-016-5363-y ↗
45. High efficiency dye-sensitized solar cell based on a novel gel polymer electrolyte containing RbI and tetrahexylammonium iodide (Hex4NI) salts and multi-layered photoelectrodes of TiO2 nanoparticles10.1016/j.rser.2018.12.052 ↗
46. Influence of zinc content on some properties of Ni–Zn ferrites10.1016/S0272-8842(01)00103-1 ↗
47. The band structures of the silver halides AgF, AgCl, and AgBr: A comparative study10.1039/b211678b ↗
48. Comparison of single-ion conducting polymer gel electrolytes for sodium, potassium, and calcium batteries: influence of polymer chemistry, cation identity, charge density, and solvent on conductivity10.3390/batteries6010011 ↗
49. Enhanced ionic conductivities in composite polymer electrolytes by using succinonitrile as a plasticizer10.1016/j.ssi.2008.01.035 ↗
50. B, Zhao, M, Hamidinejad, C, Zhao, R, Li, S, Wang, Y, Kazemi, C.B, Park, A versatile foaming platform to fabricate polymer/carbon composites with high dielectric permittivity and ultra-low dielectric loss. Journal of Materials Chemistry A, 7(1) (2019) 133-140. https:// doi.org/10.1039/C8TA05556D.10.1039/C8TA05556D ↗
51. Electrical properties of biodegradable poly (ɛ-caprolactone): lithium thiocyanate complexed polymer electrolyte films10.1016/j.mseb.2015.02.003 ↗
52. M, Coşkun, Ö, Polat, F. M, Coşkun, Z, Durmuş, M, Çağlar, A. B, Türüt, The electrical modulus and other dielectric properties by the impedance spectroscopy of LaCrO3 and LaCr0.90Ir0.10O3 perovskites,RSC advances8 (9) (2018) 4634-4648. https://doi.org/10.1039/C7RA13261A.10.1039/C7RA13261A ↗
53. Ionic conductivity and relaxation studies in PVDF-HFP: PMMA-based gel polymer blend electrolyte with LiClO4 salt10.1142/S2010135X18500054 ↗
54. Solvent engineering for forming stonehenge-like PbI2 nano-structures towards efficient perovskite solar cells10.1039/C6TA11004E ↗
55. Current density enhancement for quantum dot-sensitized solar cells by modulation on the quantum dot loading amount of anatase nanowire array photoelectrodes10.1007/s10008-021-04969-z ↗
56. Recent developments in zinc-based two-cation oxide spinels: From synthesis to applications10.1016/j.ceramint.2020.09.249 ↗
57. Self-assembled CdS/Au/ZnO heterostructure induced by surface polar charges for efficient photocatalytic hydrogen evolution10.1039/c3ta01476b ↗
58. Some characteristics of solar cells with ZnO/ZnFe2O4/CdS/ZnS working anode10.1007/s11082-021-02922-y ↗
59. R.Y, Yang, H.Y, Chen, F.D, Lai, Performance degradation of dye-sensitized solar cells induced by electrolytes.Advances in Materials Science and Engineering (2012) 2012. https://doi.org/10.1155/2012/902146.10.1155/2012/902146 ↗
60. Performance of colloidal CdS sensitized solar cells with ZnO nanorods/nanoparticles10.3762/bjnano.8.23 ↗
61. Fabrication of ZnO nanostructures sensitized with CdS quantum dots for photovoltaic application using a convenient solution method10.1016/j.materresbull.2014.10.068 ↗
62. A new concept of charging supercapacitors based on the photovoltaic effect10.1039/C6CC08131B ↗