journal article·2022-11

Effect of cotton fiber addition and carbonization temperature to the structural-and-surface-property change of C/C composite xerogels as electrodes for electric double layer capacitors

Kasawan Sirichan, Kriangsak Kraiwattanawong, Palang Bumroongsakulsawat, Suttichai Assabumrungrat

Publisher page

Abstract

Carbon/carbon (C/C) composites containing micropores, mesopores and macropores as trimodal structure are a class of promising electrode materials for electric double layer capacitors. The existence of cotton fibers can change pore structure, electrical resistance and surface properties of C/C composites by the increase of carbonization temperature. In this work, C/C composite xerogel electrodes possessing trimodal structure were prepared from resorcinol, formaldehyde, and cotton fibers. Sufficiently high carbonization temperatures had to be reached to obtain electrodes possessing high electrical double layer capacitance. The addition of cotton fibers lowered effective carbonization temperatures and created macropores, which facilitated transport of carbonization gases and heat transfer in pores located deep in the samples. Cotton fibers also prevented collapse of mesopores during vacuum drying. Samples with cotton fibers added had 27–40% more mesopore volume. The highest specific capacitance obtained was 175 F g −1 during discharge at 0.5 A g −1.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Aerogels and thermal insulation · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Carbon materials for electrochemical capacitors10.1016/j.jpowsour.2010.06.036 ↗
2. A study on pore development mechanism of activated carbons from polymeric precursor: Effects of carbonization temperature and nano crystallite formation10.1016/j.cej.2019.01.115 ↗
3. Correlation between the capacitor performance and pore structure of ordered mesoporous carbons10.1016/j.apt.2013.03.003 ↗
4. Binderfree synthesis of high-surface-area carbon electrodes via CO2 activation of resorcinol–formaldehyde carbon xerogel disks: Analysis of activation process10.1016/j.carbon.2014.04.074 ↗
5. Study of the structure-properties relations of carbon spheres affecting electrochemical performances of EDLCs10.1016/j.electacta.2019.02.121 ↗
6. An experimental investigation of the ion storage/transfer behavior in an electrical double-layer capacitor by using monodisperse carbon spheres with microporous structure10.1021/jp308415s ↗
7. Preparation and enhanced supercapacitance performance of porous carbon spheres with a high degree of graphitization10.1039/C4RA09204J ↗
8. Flexible graphene/carbon nanotube electrochemical double-layer capacitors with ultrahigh areal performance10.1002/cplu.201900235 ↗
9. EDLC characteristics of carbon materials prepared from coal extract10.5796/electrochemistry.20-63011 ↗
10. A desolvated solid–solid interface for a high-capacitance electric double layer10.1002/aenm.201803715 ↗
11. Macropore-assisted electrolyte transfer inside binder-free templated carbon xerogels as carbon electrode for electric double layer capacitors10.1016/j.eurpolymj.2020.109678 ↗
12. Relationships between pore size and charge transfer resistance of carbon aerogels for organic electric double-layer capacitor electrodes10.1016/j.electacta.2016.11.177 ↗
13. Capacitive performance of binder-free carbon/carbon composite cryogels10.1016/j.micromeso.2012.08.022 ↗
14. Organic aerogels from the polycondensation of resorcinol with formaldehyde10.1007/BF01139044 ↗
15. Control of mesoporous structure of organic and carbon aerogels10.1016/S0008-6223(97)00202-9 ↗
16. Chemistry of aerogels and their applications10.1021/cr0101306 ↗
17. Preparation and properties of resorcinol–formaldehyde organic and carbon gels10.1002/adma.200390020 ↗
18. Control of mesoporosity of carbon gels prepared by sol–gel polycondensation and freeze drying10.1016/S0022-3093(01)00619-6 ↗
19. Porous carbon xerogels with texture tailored by pH control during sol–gel process10.1016/j.carbon.2003.12.072 ↗
20. Influence of doping nitrogen, sulfur, and phosphorus on activated carbons for gas adsorption of H2, CH4 and CO210.1039/C6RA06620H ↗
21. Role of catalyst type in the selective separation of olefinic and paraffinic hydrocarbons using xerogel-based adsorbents10.1016/j.carbon.2008.03.015 ↗
22. Stable support based on highly graphitic carbon xerogel for proton exchange membrane fuel cells10.1016/j.jpowsour.2010.04.050 ↗
23. Cobalt-containing nanoparticles embedded in flexible carbon aerogel for spilled oil cleanup and oxygen reduction reaction10.1016/j.compositesb.2019.107039 ↗
24. High capacitance carbon-based xerogel film produced without critical drying
25. Preparation of carbon aerogel in ambient conditions for electrical double-layer capacitor10.1016/j.cap.2009.08.017 ↗
26. Preparation and characterization of carbon xerogel (CX) and CX–SiO composite as anode material for lithium-ion battery10.1016/j.elecom.2007.08.004 ↗
27. Facile synthesis of mesoporous carbon aerogel for the removal of ibuprofen from aqueous solution by central composite experimental design (CCD)10.1016/j.molliq.2019.02.084 ↗
28. Exposing 010 Active facets by multiple-layer oriented stacking nanosheets for high-performance capacitive sodium-ion oxide cathode10.1002/adma.201803765 ↗
29. Design and synthesis of layered Na2Ti3O7 and tunnel Na2Ti6O13 hybrid structures with enhanced electrochemical behavior for sodium-ion batteries10.1002/advs.201800519 ↗
30. Polyanion and cation co-doping stabilized Ni-rich Ni–Co–Al material as cathode with enhanced electrochemical performance for Li-ion battery10.1016/j.nanoen.2019.06.014 ↗
31. FeP nanorod arrays on carbon cloth: a high-performance anode for sodium-ion batteries10.1039/C8CC03827A ↗
32. Correlation of double-layer capacitance with the pore structure of sol-gel derived carbon xerogels10.1149/1.1392526 ↗
33. Study of correlation of structural and surface properties with electrochemical behaviour in carbon aerogels10.1007/s10853-005-3318-4 ↗
34. Carbon tunnels formed in carbon/carbon composite cryogels10.1016/j.micromeso.2011.12.008 ↗
35. Low-cost production of mesoporous carbon/carbon composite cryogels10.1016/j.carbon.2011.04.018 ↗
36. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
37. An improved method for the calculation of pore-size distribution from adsorption data10.1002/jctb.5010140302 ↗
38. Pore system in catalysts. V: the t-method10.1016/0021-9517(65)90307-6 ↗
39. Oxygen group-containing activated carbon aerogel as an electrode material for supercapacitor10.1016/j.materresbull.2015.04.044 ↗
40. Improvement of the textural properties of templated carbon xerogels using cotton fibres as a hard template dehydrated by sulphuric acid10.1016/j.diamond.2018.12.005 ↗
41. Relationship between structural properties and electrochemical characteristics of monolithic carbon xerogel-based electrochemical double-layer electrodes in aqueous and organic electrolytes10.1002/aenm.201100513 ↗
42. Interpretation of infrared spectra, a practical approach
43. The influence of thermal treatment on the electrochemical properties of carbon–Ni–Pd composites10.1007/s10971-014-3338-0 ↗