journal article·2022-07

Evaluation of process parameters and ultrasonic vibration in hot pressing of metal powders

Rezvan Abedini, Vahid Fartashvand, Amir Abdullah, Yunes Alizadeh

Publisher page

Abstract

This paper investigated the effects of process parameters and ultrasonic vibration in the hot pressing of spherical Ti-6Al-4 V powders. The parameters were the consolidation temperature (750, 850, and 950 ℃), densification pressure (10, 20, and 30 MPa), and ultrasonic power (0 and 300 W). Relative density, Vickers hardness, and Transverse Rupture Strength (TRS) were used to evaluate their influences. The results show that applying ultrasonic vibration could improve the properties of the final part, namely increasing initial relative density, final relative density, Vickers hardness, and strength of specimen are 11.7%, 11.1%, 86%, and 130%, respectively. It is found that the temperature and pressure have different effects on the ultrasonic efficiency so that ultrasonic efficiency reduces with increasing hot pressing pressure while increasing temperature (up to 950 °C) enhances ultrasonic efficiency. The finding shows that the consolidation of Ti-6Al-4 V powder could be significantly improved by using high-power ultrasonic vibrations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Surface Treatment and Residual Stress · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Enhanced densification of Ti–6Al–4V powders by transformation-mismatch plasticity10.1016/j.actamat.2010.03.047 ↗
2. Enhanced densification of Ti-6Al-4V/TiC powder blends by transformation mismatch plasticity10.1557/jmr.2013.95 ↗
3. K.H. Staffa et al., Vibratory hot pressing of spherical copper powder at 150 and 20 000 Hz, Part II: Comparison of Experimental and Theoretical Results powder metal 18(2) (1986) 66-70.
4. K.H. Staffa et al., Vibratory Hot Pressing of Spherical Copper Powder at 150 and 20 000 Hz, Part III: Complementary experiments on particle rearangement powder metal 18(4) (1986) 271-274.
5. Vacuum hot pressing of metal powders under the action of ultrasonic vibrations
6. Effectiveness of ultrasonic vibrations applied during the hot pressing of iron powder10.1007/BF00797358 ↗
7. J.A. Gallego-Juarez, K.F. Graff, Power Ultrasonics: Applications of High-intensity Ultrasound. 2015: Elsevier.
8. Influence of ultrasonic vibration on metallic friction10.1016/0041-624X(66)90244-7 ↗
9. Ultrasonic hot powder compaction of Ti-6Al-4V10.1016/j.ultsonch.2017.02.012 ↗
10. Ultrasonic Assisted Hot Metal Powder Compaction10.1016/j.ultsonch.2016.09.025 ↗
11. ASM Handbook – V7 Powder metal technologies andapplication. Vol. 7. 1998: ASM International. 2762.
12. Ashby · 1982
13. Metal forming with vibrated tools10.1115/1.3591766 ↗
14. Superimposed ultrasonic oscillations in compression tests of aluminium10.1016/j.ultras.2006.05.116 ↗
15. Effects of Ultrasound on Deformation Characteristics of metals10.1109/T-SU.1966.29367 ↗
16. V. Fartashvand, A. Abdullah, S.A. Sadough Vanini, Investigation of Ti-6Al-4V alloy acoustic softening. Ultrasonics Sonochem.
17. Influence of superimposed ultrasound on deformability of Cu10.1063/1.3266170 ↗
18. H.K. Kirchner et al., Plastic deformation under simultaneous cycliy and unidirectional loading at low and ultrasonic frequencies. 1984.10.1016/B978-0-08-031642-0.50021-0 ↗
19. A comparative study of mechanical and microstructural characteristics of aluminium and titanium undergoing ultrasonic assisted compression testing10.1016/j.msea.2016.11.021 ↗
20. Ultrasonic dynamic impact effect on deformation of aluminum during micro-compression tests10.1016/j.jmatprotec.2018.03.021 ↗
21. Characterising the acoustoplastic effect in an ultrasonically assisted metal forming process10.1088/1757-899X/42/1/012017 ↗
22. Investigations on the material property changes of ultrasonic-vibration assisted aluminum alloy upsetting10.1016/j.matdes.2012.07.021 ↗
23. Frictional effect of ultrasonic-vibration on upsetting10.1016/j.ultras.2007.03.003 ↗
24. Non-linear effects of high power ultrasonics in crystalline solids10.1016/0041-624X(75)90063-3 ↗
25. The effect of ultrasonic vibrations on the compacting of metal powders10.1016/0041-624X(67)90065-0 ↗
26. Influence of ultrasonic vibrations on tube spinning process10.1016/j.jmatprotec.2012.02.006 ↗
27. Superimposing Ultrasonic Waves on the Dies in Tube and Wire Drawing10.1115/1.1397779 ↗
28. Sadough Vanini, Effects of high power ultrasonic vibration on the cold compaction of titanium10.1016/j.ultsonch.2016.11.017 ↗
29. V. Fartashvand, R. Abedini, A. Abdullah, Influence of ultrasonic vibrations on the properties of press-and-sintered titanium, in: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022: p. 09544054221078386.10.1177/09544054221078386 ↗
30. V.A. Joshi, Titanium alloys: an atlas of structures and fracture features, CRC Press 2006.10.1201/9781420006063 ↗