journal article·2021-08

Exploring the potential of thin films made from poly(imide-amide-sulfone)s for engineering applications

Catalin-Paul Constantin, Mihai Asandulesa, Cristian Varganici, Violeta Melinte, Maria Bruma, Andrzej Jankowski, Aleksandra Wolińska-Grabczyk, Mariana-Dana Damaceanu

Publisher page

Abstract

Abstract This work focuses on the thorough investigation of structure–assisted multifunctional properties of some poly(amide-imide-sulfone) films specifically designed to meet the technological needs. In this respect, the influence of structural parameters onto mechanical, optical, dielectric and gas transport properties was deeply explored along with some general characteristics, like chemical integrity, thermal stability and solid-state packing. The understudy tough and flexible films featuring amorphous state displayed good mechanical behavior, withstanding repeating bending or rolling. The sulfone groups reduced the charge transfer complex formation, and in some cases, increased transparency. The permittivity, dielectric loss and conductivity and their variation with frequency and temperature were studied along with γ and β secondary relaxations originating from small- and large-scale segmental motions. The permeability of CO2, O2 and N2 through these dense films along with diffusion and solubility coefficients and respective selectivities were measured and discussed in relation with the structural parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Synthesis and properties of polymers · Membrane Separation and Gas Transport · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. The use, design, synthesis, and properties of high performance/high temperature: an overview10.1177/095400830301500101 ↗
2. Materials and processing of polymer-based electrochromic devices10.1016/j.mseb.2017.11.016 ↗
3. General overview of graphene: production, properties and application in polymer composites10.1016/j.mseb.2016.10.004 ↗
4. The chromic and electrochemical response of CoCl2 − filled polyimide materials for sensing applications10.1016/j.snb.2016.04.172 ↗
5. Study of thin films made from aromatic polymers containing six-member imide rings10.1177/0954008311431115 ↗
6. Dielectric properties of polyimide/SiO2 hollow spheres composite films with ultralow dielectric constant10.1016/j.mseb.2015.10.003 ↗
7. n-Type polyimides with 1,3,4-oxadiazole-substituted triphenylamine units-an innovative structural approach10.1021/acs.jpcc.9b02126 ↗
8. Biocompatibility of polyimides: a mini-review10.3390/ma12193166 ↗
9. Advanced polyimide materials: syntheses, physical properties and applications10.1016/j.progpolymsci.2012.02.005 ↗
10. One step process of decomposition and polymerization to fabricate SiO2 hollow spheres/polyimide composite for foldable OLEDs10.1016/j.mseb.2016.11.001 ↗
11. Chain flexibility versus molecular entanglement response to rubbing deformation in designing poly(oxadiazole-naphthylimide)s as liquid crystal orientation layers10.1007/s10853-013-8010-5 ↗
12. Direct coating of copper nanoparticles on flexible substrates from copper precursors using underwater plasma and their EMI performance10.1016/j.mseb.2020.114995 ↗
13. Cassidy · 1980
14. Solubility improvements in aromatic polyimides by macromolecular engineering10.1039/c2ra20175e ↗
15. Tuning of the colour of the emitted light from new polyperyleneimides containing oxadiazole and siloxane moieties10.1016/j.dyepig.2013.04.035 ↗
16. Photo-optical and electrochemical behavior of novel heterocyclic poly(naphthylimide-amide)s10.1007/s10965-014-0530-4 ↗
17. Advanced materials based on new structurally designed poly(naphthylimide-amide)s10.1002/pi.4792 ↗
18. Highly transparent and hydrophobic fluorinated polyimide films with ortho-kink structure10.1016/j.eurpolymj.2013.10.030 ↗
19. Ortho-catenation and trifluoromethyl graphting as driving forces in physical properties modulation of novel ethanol-soluble triphenylamine-based polyimides10.1016/j.dyepig.2018.11.046 ↗
20. Conversion of renewable vanillin into high performance polyimides via an asymmetric aromatic diamine derivation10.1016/j.polymdegradstab.2019.06.002 ↗
21. Synthesis and properties of new aromatic polyimides containing spirocyclic structures10.1016/j.polymer.2018.01.013 ↗
22. Synthesis and properties of novel soluble fluorinated aromatic polyamides containing 4-benzoyl-2,3,5,6-tetrafluorophenoxy pendant groups10.1007/s10965-018-1454-1 ↗
23. Synergetic effect between structural manipulation and physical properties towards perspective electrochromic n-type polyimides10.1021/acs.macromol.9b01576 ↗
24. Synthesis, morphology investigation and thermal mechanical properties of dopamine-functionalized multi-walled carbon nanotube/poly(amide-imide) composites10.1016/j.reactfunctpolym.2016.07.010 ↗
25. Preparation of heat-resistant poly(amide-imide) films with ultralow coefficients of thermal expansion for optoelectronic application10.1016/j.reactfunctpolym.2019.05.009 ↗
26. Development of underwater superoleophobic polyamide-imide (PAI) microfiltration membranes for oil/water emulsion separation10.1016/j.seppur.2019.116451 ↗
27. Adhesive and dielectric properties of novel polyimides with bis(3-aminophenyl)-2,3,5,6-tetrafluoro-4-trifluoromethyl phenyl phosphine oxide (mDA7FPPO)10.1016/j.eurpolymj.2009.03.009 ↗
28. Synthesis and Characterization of Fluorinated Poly(imide-amide-sulfone)s10.1002/app.1995.070560501 ↗
29. Correlation between cohesive energy density, fractional free volume, and gas transport properties of poly(ethylene-co-vinyl acetate) materials10.1155/2015/861979 ↗
30. 6MeV pulsed electron beam induced surface and structural changes in polyimide10.1016/j.mseb.2009.11.005 ↗
31. Preparation of polyimide/Al2O3 composite films as improved solid dielectrics10.1016/j.mseb.2011.04.001 ↗
32. Organosoluble asymmetric aramides bearing pendent phenoxy groups10.1002/pi.3070 ↗
33. Blue fluorescent polyamides containing naphthalene and oxadiazole rings10.1002/pola.24500 ↗
34. Novel type of highly soluble and thermally stable poly(sulfone ether imide)s10.1080/15685551.2015.1078112 ↗
35. Effect of membrane chemistry and coating layer on physiochemical properties of thin film composite polyamide RO and NF membranes: I. FTIR and XPS characterization of polyamide and coating layer chemistry10.1016/j.desal.2008.04.003 ↗
36. Polyimides containing 1,3,4-oxadiazole rings10.1135/cccc20081631 ↗
37. Comparative study of polyimides containing oxadiazole and ether groups10.1177/0954008309339202 ↗
38. Synthesis and characterization of poly(amide-imide)s derived from a new ortho-functional unsymmetrical dicarboxylic acid10.1039/C7RA11710H ↗
39. Synthesis and characterization of new aromatic poly(amide-imide-urea)s derived from bis(4-trimellitimidophenyl) urea and various aromatic diamines
40. Highly fluorinated polyimide blends – insights into physico-chemical characterization10.1016/j.polymer.2014.06.089 ↗
41. Color lightness and highly organosoluble fluorinated polyamides, polyimides and poly(amide–imide)s based on noncoplanar 2,2’-dimethyl-4,4’-biphenylene units10.1016/j.polymer.2006.01.028 ↗
42. Synthesis of highly transparent poly(amide–imide)s based on trimellitic acid and dependence of thermal properties on monomer sequence10.1016/j.reactfunctpolym.2016.04.016 ↗
43. New poly(amide-imide)s with trifluoromethyl and chloride substituents: Synthesis, thermal, dielectric, and optical properties10.1016/j.eurpolymj.2017.07.023 ↗
44. Belfiore · 2010
45. Gas separation properties of Troeger’s base-bridged polyamides10.1515/epoly-2016-0291 ↗
46. Photophysics, photochemistry, and optical properties of polyimides10.1016/S0079-6700(00)00042-3 ↗
47. Recent trends on transparent colorless polyimides with balanced thermal and optical properties: design and synthesis10.1002/macp.201800313 ↗
48. The effects of hydroxyl groups on the thermal and optical properties of poly(amide-imide)s with high adhesion for transparent films10.1016/j.porgcoat.2017.06.018 ↗
49. Synthesis and characterization of poly(amideimide)s derived from a new ortho-functional unsymmetrical dicarboxylic acid10.1039/C7RA11710H ↗
50. Electrical and mechanical properties of polyimide films treated by plasma formed in water and isopropanol10.1016/j.reactfunctpolym.2018.11.005 ↗
51. Low dielectric constants of soluble polyimides based on adamantine10.1021/ma970520n ↗
52. Insulating polyimide films containing n-type perylenediimide moiety10.1002/pi.4253 ↗
53. Dielectric and gas transport properties of highly fluorinated polyimides blends10.1177/0954008315584181 ↗
54. Achieving high dielectric constant and low loss property in a dipolar glass polymer containing strongly dipolar and small-sized sulfone groups10.1021/am508488w ↗
55. Fundamental insight on developing low dielectric constant polyimides10.1016/S0040-6090(97)00481-1 ↗
56. Insights into the chain and local mobility of some aromatic polyamides and their influence on the physicochemical properties10.1002/macp.201400213 ↗
57. A complex plane representation of dielectric and mechanical relaxation processes in some polymers10.1016/0032-3861(67)90021-3 ↗
58. Structure – promoted high performance properties of triphenylmethane -containing polyimides and copolyimides10.1016/j.eurpolymj.2018.09.029 ↗
59. Electrical conductivity of polyazomethine/fullerene C60 nanocomposites10.1016/j.physleta.2016.12.045 ↗
60. Segmental dynamics and ionic conduction in poly(vinyl methyl ether) – lithium perchlorate complexes10.1021/jp0499777 ↗
61. Correlation of separation factor versus permeability for polymeric membranes10.1016/0376-7388(91)80060-J ↗
62. The upper bound revisited10.1016/j.memsci.2008.04.030 ↗
63. Insights into molecular engineering of membranes based on fluorinated polyimide-polyamide miscible blends which do not obey the trade-off rule10.1016/j.seppur.2019.116031 ↗
64. Polyimides in membrane gas separation: Monomer’s molecular design and structural engineering10.1016/j.progpolymsci.2019.02.001 ↗