journal article·2023-02

Improved infrared reflection properties of aluminum-doped zinc oxide thin films depending on sputtering pressure for low emissivity applications

Meltem Babayiğit Cinali, Özlem Duyar Coşkun

Publisher page

Abstract

Aluminum-doped zinc oxide (AZO) films were prepared on glass substrates using radio frequency (RF) magnetron sputtering technique. The sputtering pressure was varied between 10 and 80 mTorr for films with a deposition time of 30 min and between 40 and 80 mTorr for films with a deposition time of 180 min. Effects of the sputtering pressure on optical properties, crystal structure, electrical properties, microstructure and infrared reflection of the AZO films were systematically investigated by UV–VIS–NIR spectrophotometry, XRD, Hall measurement, AFM and FTIR, respectively. The prepared AZO film at PAr = 80 mTorr with 180 min deposition time exhibits the lowest electrical resistivity, highest mobility and carrier concentration as well as high average visible transmission in 400–760 nm wavelength range about 82.9%. The average infrared reflection of 63.1% in 8–14 μm waveband makes the film a superior candidate for low-emissivity applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Vacuum glazing for highly insulating windows: Recent developments and future prospects10.1016/j.rser.2015.10.134 ↗
2. Thermal performance investigation of heat insulation solar glass: a comparative experimental study10.1016/j.enbuild.2014.10.063 ↗
3. Solar energy materials for glazing technologies10.1016/j.solmat.2015.09.040 ↗
4. Preparation and performance of low-emissivity Al-doped ZnO films for energy-saving glass10.1016/j.ceramint.2018.07.207 ↗
5. Low-emissivity materials for building applications: A state-of-the-art review and future research perspectives10.1016/j.enbuild.2015.03.024 ↗
6. Diamond-like carbon based low-emissive coatings10.1016/j.solmat.2011.01.015 ↗
7. Solar control coating on glass10.1016/S1359-0286(98)80049-1 ↗
8. Thermally stable transparent conducting and highly infrared reflective Ga-doped ZnO thin films by metal organic chemical vapor deposition10.1016/j.optmat.2010.12.008 ↗
9. Integrated low-emittance–electrochromic devices incorporating ZnS/Ag/ZnS coatings as transparent conductors10.1016/S0927-0248(99)00101-4 ↗
10. Highly transparent conductive and near-infrared reflective ZnO: Al thin films10.1016/j.vacuum.2010.01.010 ↗
11. AZO/Ag/AZO transparent conductive films: correlation between the structural, electrical, and optical properties and development of an optical model10.1364/OME.6.003217 ↗
12. The reason of degradation in electrical properties of ZnO: Al thin films annealed with various post-annealing temperature10.1016/j.cap.2013.08.008 ↗
13. Effect of heat treatment on infrared reflection property of Al-doped ZnO films10.1016/j.solmat.2014.04.030 ↗
14. Highly transparent and infrared reflective AZO/Ag/AZO multilayer film prepared on PET substrate by RF magnetron sputtering10.1016/j.vacuum.2014.02.021 ↗
15. Infrared reflective properties of AZO/Ag/AZO trilayers prepared by RF magnetron sputtering10.1016/j.ceramint.2014.04.139 ↗
16. Characterization of AZO and Ag based films prepared by RF magnetron sputtering10.1016/j.jallcom.2014.07.105 ↗
17. Dependence of the properties of sputter deposited Al-doped ZnO thin films on base pressure10.1016/j.jallcom.2012.01.078 ↗
18. Room-temperature deposition of transparent conducting Al-doped ZnO films by RF magnetron sputtering method10.1016/j.apsusc.2008.12.021 ↗
19. Room temperature deposition of Al-doped ZnO thin films on glass by RF magnetron sputtering under different Ar gas pressure10.1016/j.jallcom.2010.09.047 ↗
20. Optimisation of ZnO: Al films by change of sputter gas pressure for solar cell application10.1016/S0169-4332(02)00611-6 ↗
21. Argon gas pressure dependence of the properties of transparent conducting ZnO: Al films deposited on glass substrates10.1016/S0169-4332(00)00748-0 ↗
22. Room temperature deposition and properties of ZnO: Al thin films by nonreactive DC magnetron sputtering10.1007/s10854-007-9489-9 ↗
23. Influence of working pressure on the structural, optical and electrical properties of sputter deposited AZO thin films10.1016/j.mssp.2014.12.076 ↗
24. Effect of the RF sputtering power on microstructural, optical and electrical properties of Al doped ZnO thin films10.1016/j.tsf.2015.06.035 ↗
25. B. Chun, et al., The effect of deposition power on the electrical properties of Al-doped zinc oxide thin films, Appl. Phys. Lett., 97 (8) (2010) 082109.10.1063/1.3483232 ↗
26. Effect of RF power on an Al-doped ZnO thin film deposited by RF magnetron sputtering10.3938/jkps.59.2349 ↗
27. Optical and electrical characteristics of Al-doped ZnO thin films prepared by aqueous phase deposition10.1016/j.apsusc.2010.08.064 ↗
28. Structural, electrical, and optical properties of transparent conductive oxide ZnO: Al films prepared by dc magnetron reactive sputtering10.1116/1.1368836 ↗
29. Fabrication and vacuum annealing of transparent conductive AZO thin films prepared by DC magnetron sputtering10.1016/S0042-207X(02)00544-4 ↗
30. Ellipsometric studies on ZnO: Al thin films: Refinement of dispersion theories10.1016/j.tsf.2010.09.057 ↗
31. Optical and electrical properties of Al doped ZnO thin film with preferred orientation in situ grown at room temperature10.1016/j.ceramint.2019.04.149 ↗
32. Preparation and infrared emissivity of ZnO: Al (AZO) thin films10.1016/j.apsusc.2009.01.068 ↗