Effect of xGnP/MWCNT reinforcement on mechanical, wear behavior and crystallographic texture of copper-based metal matrix composite
Source abstract
Abstract
Abstract In the present investigation, Cu-based MMCs have been developed by PM route using exfoliated graphite nanoplatelets (xGnP) and MWCNTs as nanofillers and their influence on mechanical properties as well as crystallographic texture have been studied. xGnP possesses fine particle size as well as less disorder as compared to MWCNTs. Relative density, hardness and wear resistance found to be increased with the addition of nanofillers upto 2 wt% xGnP/MWCNTs, whereas porosity found to decrease with the addition of nanofillers upto 2 wt%. The hardness of Cu-2 wt% xGnP composite was found to be 560 MPa, which is about 1.6 times higher than that of the pure Cu sample (350 MPa) and 1.2 times greater than Cu-2 wt% MWCNTs composite (475 MPa). The wear mechanism was found to involve a combination of abrasion, ploughing, delamination, microcracks, deep grooves and pullout of nanofillers in all the composites. The tensile strength of the various Cu-xGnP composites shows an improvement upto the addition of 2 wt% xGnP. The maximum tensile strength of 130 MPa was achieved in the case of Cu-2 wt% xGnP composite, which is about 1.7 times higher than that of the pure sintered Cu sample (76 MPa). However, the tensile strength of the various Cu-MWCNT composites continuously decreases with the addition of MWCNTs. The homogenous distribution of xGnP, as well as good bonding of xGnP with Cu matrix, has been observed in SEM and TEM images of composites, which is found to be more dominant as compared to MWCNTs distribution in Cu-matrix. The residual stress in the various composites was found to be compressive in nature, and it shows a similar trend as that of the other properties like hardness and wear behaviour of the composites. The addition of nanofillers also altered the crystallographic texture of the composites. xGnP leads to weaker texture as well as decrees in the volume fraction of 〈0 1 1〉 fiber as compared to MWCNTs in Cu-based MMCs, which leads to having superior mechanical properties as compared to MWCNTs composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Study of wear mechanisms in copper-based SiCp (20% by volume) reinforced composite10.1016/j.wear.2007.09.001 ↗
2. Microstructure and properties of squeeze cast Cu-carbon fibre metal matrix composite10.1023/A:1004744613190 ↗
3. Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles10.1016/j.scriptamat.2004.10.031 ↗
4. Dry Sliding Wear of a Powder Metallurgy Copper-based Metal Matrix Composite Reinforced with Iron Aluminide Intermetallic Particles10.1177/0021998306069888 ↗
5. Recent Advances on Carbon Nanotubes and Graphene10.3390/nano5010090 ↗
6. Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene - A review10.1016/j.compositesb.2015.03.014 ↗
7. A new electrochemical approach for the synthesis of copper-graphene nanocomposite foils with high hardness10.1038/srep04049 ↗
8. Agarwal · 2010
9. Functionalization of CNT: Synthesis and applications in photovoltaics and biology, in10.1002/poc.1052 ↗
10. The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites10.1016/j.compositesa.2010.11.008 ↗
11. Comparison of Exfoliated Graphite Nanoplatelets (xGnP) and CNTs for Reinforcement of EVA Nanocomposites Fabricated by Solution Compounding Method and Three Screw Rotating Systems10.1163/156856109X440984 ↗
12. Characterisation of graphite nanoplatelets and the physical properties of graphite nanoplatelet/silicone composites for thermal interface applications10.1016/j.carbon.2011.06.002 ↗
13. Strong and ductile nanostructured Cu-CNT composite10.1063/1.3211921 ↗
14. Understanding interfaces in metal-graphitic hybrid nanostructures10.1021/jz301711a ↗
15. P.O. K. Pawlik, LaboTex: The Texture Analysis Software, Göttinger Arbeiten zur Geologie und Paläontologie, 1999.
16. Processing and characterization of nanostructured Cu-carbon nanotube composites10.1016/j.msea.2009.05.031 ↗
17. Grain refinement assisted strengthening of carbon nanotube reinforced copper matrix nanocomposites
18. Preparation and characterization of graphite nanosheets from ultrasonic powdering technique10.1016/j.carbon.2003.12.074 ↗
19. Graphite structural transformations during intercalation by HNO3 and exfoliation10.1016/j.carbon.2010.01.055 ↗
20. Processing of expanded graphite reinforced polymer nanocomposites10.1016/j.compscitech.2005.10.014 ↗
21. Intercalation and exfoliation routes to graphite nanoplatelets10.1039/b413029d ↗
22. Chemical oxidation of multiwalled carbon nanotubes10.1016/j.carbon.2008.02.012 ↗
23. Preparation of fully exfoliated graphite oxide nanoplatelets in organic solvents10.1039/b705906j ↗
24. One Pot Synthesis of Graphene by Exfoliation of Graphite in ODCB10.4236/graphene.2013.21006 ↗
25. M.E. Mendoza, A.P. Campos, B.S. Archanjo, I.F. Machado, I.G. Solorzano, MS 4 O 3460 Transmission electron microscopy characterization of copper multiwall carbon nanotube interfaces in Cu CNT nanocomposites, (2016) 4–6.
26. Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening10.1016/S1359-6454(01)00069-6 ↗
27. R aman spectroscopy on isolated single wall carbon nanotubes10.1016/S0008-6223(02)00066-0 ↗
28. Studies of Multiwall Carbon Nanotubes Using Raman Spectroscopy and Atomic Force Microscopy10.4028/www.scientific.net/SSP.99-100.265 ↗
29. Characterizing Graphene, Graphite, and Carbon Nanotubes by Raman Spectroscopy10.1146/annurev-conmatphys-070909-103919 ↗
30. General equation for the determination of the crystallite size la of nanographite by Raman spectroscopy
31. Quantifying defects in graphene via Raman spectroscopy at different excitation energies10.1021/nl201432g ↗
32. A green approach to the synthesis of graphene nanosheets10.1021/nn900227d ↗
33. Enhancement of the mechanical properties of graphene-copper composites with graphene-nickel hybrids10.1016/j.msea.2014.01.061 ↗
34. Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties10.1016/j.carbon.2013.11.058 ↗
35. A combination of ball milling and high-ratio differential speed rolling for synthesizing carbon nanotube/copper composites10.1016/j.carbon.2013.04.105 ↗
36. Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites10.1038/ncomms3114 ↗
37. Synthesis and Characterization of Exfoliated Graphite / ABS Composites
38. M.E. Mendoza, I.G. Solórzano, T. Aoki, D.J. Smith, Cu / MWCNT Interfaces in Room Temperature Aged Nanocomposites Revealed by HRTEM and EELS, 21 (2015) 977–978.10.1017/S1431927615005681 ↗
39. Facile Synthesis and Characterization of Graphene Nanosheets10.1021/jp710931h ↗
40. Synthesis and Characterization of Air-Stable Elemental Fe Thin Films by Chemical Vapor Deposition of Fe3(CO)12
41. An alternative improved method for the homogeneous dispersion of CNTs in Cu matrix for the fabrication of Cu/CNTs composites10.1007/s13204-012-0078-8 ↗
42. Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process10.1016/j.msea.2009.01.073 ↗
43. Enhanced mechanical properties of graphene/copper nanocomposites using a molecular-level mixing process10.1002/adma.201302495 ↗
44. Hardness and wear resistance of carbon nanotube reinforced Cu matrix nanocomposites Hardness and wear resistance of carbon nanotube reinforced Cu matrix nanocomposites10.1016/j.msea.2014.11.015 ↗
45. Hardness and Wear Resistance of Carbon Nanotube Reinforced Aluminum-Copper Matrix Composites10.1166/jnn.2014.10084 ↗
46. A.A. Ashraf, Wear Characteristic of Exfoliated Graphite Nano Sheets / Copper Metal Matrix Composite, The Sixth International Scientific Conference Mechanics (2008) 7-14.
47. Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites10.1016/j.msea.2006.04.085 ↗
48. Grain refinement and tensile strength of carbon nanotube-reinforced Cu matrix nanocomposites processed by high-pressure torsion10.1007/s12540-013-5004-4 ↗
49. Friction and wear behaviors of nanocrystalline surface layer of pure copper10.1016/j.wear.2005.06.010 ↗
50. An investigation of the sliding wear behavior of Cu-matrix composite reinforced by carbon nanotubes10.1016/S0921-5093(01)00963-7 ↗
51. Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders10.1016/S0043-1648(02)00038-8 ↗
52. Sliding wear behavior of copper–graphite composite material for use in maglev transportation system10.1016/j.wear.2008.02.015 ↗
53. Synthesis, characterization and tribological properties of Cu/reduced graphene oxide composites10.1016/j.triboint.2015.02.028 ↗
54. Friction and wear behavior of copper matrix composites reinforced with SiC and graphite particles10.1023/B:TRIL.0000017423.70725.1c ↗
55. Wear Properties of Cu-CNT Nanocomposites, in Carbon Nanotub. - From Res. to Appl
56. Mechanical and microstructural characterization of Cu/CNT nanocomposite layers fabricated via friction stir processing10.1007/s00170-014-6663-0 ↗
57. Electrical and Thermal Conductivity and Tensile and Flexural Properties of Carbon Nanotube / Polycarbonate Resins10.1002/app.31585 ↗
58. Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling10.1016/j.matdes.2014.08.019 ↗
59. Microstructures and tensile behavior of carbon nanotubes reinforced Cu matrix composites with molecular-level dispersion10.1016/j.matdes.2011.08.021 ↗
60. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys10.1016/j.msea.2011.12.072 ↗
61. Strengthening and Toughening Mechanisms of Ceramic Nanocomposites10.1111/j.1151-2916.1998.tb02503.x ↗
62. Effect of strain path on texture and annealing microstructure development in bulk pure copper processed by simple shear10.1016/j.actamat.2004.10.032 ↗
63. Microstructure and microtexture evolution during strain path changes of an initially stable Cu single crystal10.1016/j.actamat.2009.12.055 ↗
64. J. Humphreys, Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, 2001.10.1046/j.1365-2818.2001.00936.x ↗