High efficiency lithium storage in 3D composite foam of Co3O4 nanoparticles integrated carbon nanohorns
Source abstract
Abstract
Abstract A well-designed 3 dimensional (3D) nanocomposite foam of Co3O4 nanoparticles and functionalized carbon nano horns (CNH) is prepared by feasible wet chemistry followed by lyophilization. This 3D nanocomposite foam is evaluated electrochemically as anode material for lithium-ion battery (LIB). 3D hierarchical mesoporous hybrid of functionalized carbon nano horn-Co3O4 (CCO) shows excellent lithium storage properties with long cycle life due to high surface area, good conductivity, 3D interconnected mesoporous structure, mechanical and chemical stability and shortened diffusion path length for Li+ ions during lithiation-delithiation. The Co3O4 nanoparticles incorporated into interconnected CNH foam effectively increases the number of active sites of CCO nanocomposite and consequently increase in the reversible specific capacity and coulombic efficiency. Different compositions of CNH foam with Co3O4 nanoparticles are prepared, among which the CCO 1:1 foam displays reversible capacity of 797 mAhg−1 at current density of 0.1 Ag−1 along with excellent rate performance. High specific capacity of around 702 mAhg−1 is obtained even at the current density of 5 Ag−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Challenges for Rechargeable Li Batteries10.1021/cm901452z ↗
3. Building better batteries10.1038/451652a ↗
4. Soft-templated mesoporous carbon-carbon nanotube composites for high performance lithium-ion batteries10.1002/adma.201102032 ↗
5. α-Fe2O3 nanorods as anode material for lithium ion batteries10.1021/jz201363j ↗
6. α-Fe2O3 nanotubes in gas sensor and lithium-ion battery applications10.1002/adma.200401101 ↗
7. Accurate control of multishelled Co3O4 hollow microspheres as high-performance anode materials in lithium-ion batteries10.1002/anie.201301622 ↗
8. Nanoparticulate TiO2 (B): an anode for lithium-ion batteries10.1002/anie.201108300 ↗
9. NiO nanosheets grown on graphene nanosheets as superior anode materials for Li-ion batteries10.1039/c1nr10070j ↗
10. Mn3O4-Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion Batteries10.1021/ja105296a ↗
11. High-rate and long-life of Li-ion batteries using reduced graphene oxide/Co3O4 as anode materials10.1039/C6RA03790A ↗
12. Co3O4/carbon aerogel hybrids as anode materials for lithium-ion batteries with enhanced electrochemical properties10.1021/am400952j ↗
13. Structure, properties, functionalization, and applications of carbon nanohorns10.1021/acs.chemrev.5b00611 ↗
14. Synthesis and electrochemical performance of a single walled carbon nanohorn-Fe3O4 nanocomposite supercapacitor electrode10.1039/C3RA43079K ↗
15. An electrochemical sensor based on Co3O4 nanosheets for lead ions determination10.1039/C7RA06269A ↗
16. Hierarchical porous stratified texture and enhanced lithium-ion storage performance of Co3O4 modified by nitrogen-doped reduced graphene oxides10.1016/j.jallcom.2018.09.352 ↗
17. Surfactant-assisted synthesis of a Co3O4/reduced graphene oxide composite as a superior anode material for Li-ion batteries10.1039/c3ta01498c ↗
18. Exploration of the active center structure of nitrogen-doped graphene for control over the growth of Co3O4 for a high-performance supercapacitor10.1021/acsaem.7b00040 ↗
19. Flower-shaped cobalt oxide nano-structures as an efficient, flexible and stable electrocatalyst for the oxygen evolution reaction10.1039/C7QM00108H ↗
20. Highly ordered mesoporous carbon as catalyst for oxidative dehydrogenation of ethylbenzene to styrene10.1002/asia.200800424 ↗
21. Surface characterization of carbon fibers using angle-resolved XPS and ISS10.1016/0008-6223(94)00144-O ↗
22. Fabrication of Co3O4/graphene oxide composites using supercritical fluid and their catalytic application for the decomposition of ammonium perchlorate10.1039/c3ce41535j ↗
23. Hierarchical porous Co3O4 nanosheet arrays directly grown on carbon cloth by an electrochemical route for high performance Li-ion batteries10.1039/C3NJ01642K ↗
24. Hierarchical Co3O4 nanoparticles embedded in a carbon matrix for lithium-ion battery anode materials10.1016/j.electacta.2014.03.182 ↗
25. Metal organic frameworks route to in situ insertion of multiwalled carbon nanotubes in Co3O4 polyhedra as anode materials for lithium-ion batteries10.1021/nn506252u ↗
26. Facile preparation of porous Co3O4 nanosheets for high-performance lithium ion batteries and oxygen evolution reaction10.1016/j.jpowsour.2016.01.105 ↗
27. Nanosize SnO2 confined in the porous shells of carbon cages for kinetically efficient and long-term lithium storage10.1039/c2nr33482h ↗
28. Chowdari, α-Fe2O3 nanoflakes as an anode material for Li-ion batteries10.1002/adfm.200601186 ↗
29. Nanoparticle decorated ultrathin porous nanosheets as hierarchical Co3O4 nanostructures for lithium ion battery anode materials10.1038/srep20592 ↗
30. The kinetics of Li-ion deintercalation in the Li-rich layered Li1.12[Ni0.5Co0.2Mn0.3]0.89O2 studied by electrochemical impedance spectroscopy and galvanostatic intermittent titration technique10.1016/j.electacta.2013.06.134 ↗
31. Surface phenomena of high energy Li(Ni1/3Co1/3Mn1/3)O2/graphite cells at high temperature and high cutoff voltages10.1016/j.jpowsour.2014.07.051 ↗
32. Electrochemical behaviour of tin borophosphate negative electrodes for energy storage systems10.1016/j.jpowsour.2008.08.042 ↗