Diatom-frustule catalyst supported multiwalled carbon nanotubes: Scalable and cost-effective synthesis and stable anode for lithium-ion battery
Source abstract
Abstract
Abstract Multiwalled carbon nanotubes have interesting electrochemical properties that can be utilized for the energy storage application. However, the practical application of multiwalled carbon nanotubes is limited by the current techniques to provide large scale production. So, the large scale production of multiwalled carbon nanotubes is obtained by catalytic chemical vapor deposition of acetylene/liquified petroleum gas on diatom supported Mischmetal based nickel alloy catalyst. The developed multiwalled carbon nanotubes are uniform in diameter and the method of production does not require any process of purification. The multiwalled carbon nanotubes along with the presence of diatom is used as the high capacity anode for the lithium-ion battery. The interaction of lithium ions with both multiwalled carbon nanotubes and diatom increases the specific capacity to 1090 mAh g−1 at 0.05 A g−1 with cyclic durability of 2000 cycles. This work demonstrates a scalable method for the production of multiwalled carbon nanotubes from a cost-effective catalyst with the benefit of utilizing it as a high capacity anode material for lithium-ion battery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Nanomechanics of carbon tubes: instabilities beyond linear response10.1103/PhysRevLett.76.2511 ↗
2. E.W. Wong, P.E. Sheehan, C.M. Lieber, Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes, Science (80-.). 277 (1997) 1971–1975. doi: 10.1126/science.277.5334.1971.10.1126/science.277.5334.1971 ↗
3. Functionalized carbon nanotubes in bio-world: applications, limitations and future directions10.1016/j.mseb.2017.06.002 ↗
4. A new force field for the adsorption of H 2, O 2, N 2, CO, H 2 O, and H 2 S gases on alkali doped carbon nanotubes10.1080/00268976.2016.1232846 ↗
5. Adsorption of N 2, CH 4, CO and CO 2 gases in single walled carbon nanotubes: a combined experimental and Monte Carlo molecular simulation study10.1016/j.supflu.2010.09.017 ↗
6. Hydrogen adsorption in carbon nanostructures compared10.1016/j.mseb.2003.10.091 ↗
7. Multifunctional carbon nanotube networks for fuel cells10.1063/1.2891095 ↗
8. Carbon nanotubes for power applications10.1016/j.mseb.2004.09.034 ↗
9. Review of carbon nanotube nanoelectronics and macroelectronics10.1088/0268-1242/29/7/073001 ↗
10. Carbon nanotubes in Li-ion batteries: a review10.1016/j.mseb.2016.06.013 ↗
11. Bioconjugated carbon nanotubes for targeting cancer biomarkers10.1016/j.mseb.2008.10.026 ↗
12. Advances in carbon nanotube based electrochemical sensors for bioanalytical applications10.1016/j.biotechadv.2010.10.002 ↗
13. First principles study of Li and Li+ adsorbed on carbon nanotube: variation of tubule diameter and length10.1016/j.cplett.2005.02.084 ↗
14. Flexible lignin-derived carbon nanofiber substrates functionalized with iron (III) oxide nanoparticles as lithium-ion battery anodes10.1016/j.mseb.2019.02.013 ↗
15. Diatoms, biomineralization processes, and genomics10.1021/cr078253z ↗
16. Microstructure provides insights into evolutionary design and resilience of Coscinodiscus sp. frustule10.1073/pnas.1519790113 ↗
17. Carbon-coated, diatomite-derived nanosilicon as a high rate capable Li-ion battery anode10.1038/srep33050 ↗
18. Growing three-dimensional biomorphic graphene powders using naturally abundant diatomite templates towards high solution processability10.1038/ncomms13440 ↗
19. Diatom frustules as a biomineralized scaffold for the growth of molybdenum disulfide nanosheets10.1021/acs.chemmater.6b01738 ↗
20. Electronically transparent graphene replicas of diatoms: a new technique for the investigation of frustule morphology10.1038/srep06117 ↗
21. Growth of CNTs using liquefied petroleum gas as carbon source by chemical vapor deposition method10.4028/www.scientific.net/AMR.770.116 ↗
22. Liquefied petroleum gas containing sulfur as the carbon source for carbon nanotube forests10.1016/j.carbon.2007.11.044 ↗
23. Silicon oxides: a promising family of anode materials for lithium-ion batteries10.1039/C8CS00441B ↗
24. Synthesis of carbon nanotubes by pyrolysis of acetylene using alloy hydride materials as catalysts and their hydrogen adsorption studies10.1016/S0009-2614(03)00741-3 ↗
25. M.S. Garapati, A.P. V.S., R. Sundara, Synergy between partially exfoliated carbon nanotubes-sulfur cathode and nitrogen rich dual function interlayer for high performance lithium sulfur battery, Carbon N. Y. 147 (2019) 364–376. doi: 10.1016/j.carbon.2019.03.007.10.1016/j.carbon.2019.03.007 ↗
26. Insertion electrode materials for rechargeable lithium batteries10.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z ↗
27. Quartz (SiO2): a new energy storage anode material for Li-ion batteries10.1039/c2ee00003b ↗
28. Aquatic biomass containing porous silica as an anode for lithium ion batteries10.1039/C4RA06420H ↗
29. Ab initio investigations of lithium diffusion in carbon nanotube systems10.1103/PhysRevLett.88.075506 ↗
30. Hollow porous SiO2 nanocubes towards high-performance anodes for lithium-ion batteries10.1038/srep01568 ↗
31. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
32. Research progress regarding Si-based anode materials towards practical application in high energy density Li-ion batteries10.1039/C6QM00302H ↗
33. Hollow silica spheres with facile carbon modification as an anode material for lithium-ion batteries10.1016/j.jallcom.2018.02.073 ↗
34. Carbon-coated SiO2 nanoparticles as anode material for lithium ion batteries10.1016/j.jpowsour.2011.08.009 ↗
35. Synthesis of SiO 2 @carbon-graphene hybrids as anode materials of lithium-ion batteries10.1016/S1872-5805(17)60124-0 ↗
36. Synthesis and electrochemical performance of mesoporous SiO2–carbon nanofibers composite as anode materials for lithium secondary batteries10.1016/j.materresbull.2016.03.006 ↗
37. Cobalt sulfide quantum dot embedded N/S-doped carbon nanosheets with superior reversibility and rate capability for sodium-ion batteries10.1021/acsnano.7b07132 ↗
38. Hydrogenated core-shell MAX@K2 Ti8O17 pseudocapacitance with ultrafast sodium storage and long-term cycling10.1002/aenm.201700700 ↗
39. A.P. Vijaya Kumar Saroja, M.S. Garapati, R. ShyiamalaDevi, M. Kamaraj, S. Ramaprabhu, Facile synthesis of heteroatom doped and undoped graphene quantum dots as active materials for reversible lithium and sodium ions storage, Appl. Surf. Sci. 504 (2020) 144430. doi: 10.1016/j.apsusc.2019.144430.10.1016/j.apsusc.2019.144430 ↗