journal article·2018-03

Preparation, electrical property and periodic DFT calculation of barium titanate/hydroxyapatite rod-like nanocomposite materials

Hua Jiao, Kang Zhao, Lining Ma, Tierong Bian, Yongmei Ma, Yufei Tang

Publisher page

Abstract

Abstract Barium titanate/hydroxyapatite (BaTiO3/HA) rod-like nanocomposites were fabricated by hydrothermal process at 140–180 °C for 12 h using the rod-like HA as a growth template, and BT precursor solution as a liquid phase. The structure was BaTiO3 nanoparticles (average diameter of 6 nm) grown on the surface of HA rod like structure (diameter of ∼70 nm). The piezoelectric coefficient d33 value of the material was 1.54 pC/N, being close to the body dry bones of 0.7 pC/N. The results of periodic DFT calculations and optimized geometry of CTAB and C6H8O7 molecule obtained at the B3LYP/6-311 + g(d,p) level of theory in a suite of Gaussian 09 programs indicated CTAB and C6H8O7 molecule were key to the formation of rod-like nanocomposites. Meanwhile, a solubility – crystallization mechanism was proposed to account for the nanocomposites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Bone Tissue Engineering Materials · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Development of electrochemical folic acid sensor based on hydroxyapatite nanoparticles10.1016/j.saa.2014.07.087 ↗
2. Evaluation of bone regeneration in implants composed of hollow HA microspheres loaded with transforming growth factor β1 in a rat calvarial defect model10.1016/j.actbio.2012.11.017 ↗
3. In vitro study of hydroxyapatite/polycaprolactone (HA/PCL) nanocomposite synthesized by an in situ sol–gel process10.1016/j.msec.2012.09.004 ↗
4. In-situ grown hydroxyapatite whiskers reinforced porous HA bioceramic10.1016/j.ceramint.2013.04.075 ↗
5. Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: a review10.1016/j.matdes.2013.09.045 ↗
6. Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering10.1016/j.msec.2014.02.022 ↗
7. Preparation and characterization of BaTiO3/HA nanocomposite materials by hydrothermal synthesis10.1016/j.jallcom.2016.09.175 ↗
8. Dielectric and pyroelectric properties of HAp-BaTiO3 composites10.1080/00150193.2011.618382 ↗
9. Improved osteoblasts growth on osteomimetic hydroxyapatite/BaTiO3 composites with aligned lamellar porous structure10.1016/j.msec.2015.12.009 ↗
10. Photocatalytic activity and mechanism of nano-cubic barium titanate prepared by a hydrothermal method10.1016/j.jtice.2013.01.005 ↗
11. Solution-based growth of monodisperse cube-like BaTiO3 colloidal nanocrystals10.1021/cm9038768 ↗
12. Synthesis of hyperbranched perovskite nanostructures10.1021/cg4005483 ↗
13. Vertically aligned arrays of BaTiO3 nanowires10.1021/am403587q ↗
14. Preparation and characterization of nano-sized BaTiO3 particles using aqueous peroxotitanium acid solution: effects of pH adjustment10.1016/j.matchemphys.2014.07.027 ↗
15. Charge transfer induced magnetism in sol–gel derived nanocrystalline BaTiO310.1016/j.ssc.2014.02.010 ↗
16. Multiferroic ceramic composite with in situ glassy barrier interface and novel electromagnetic properties10.1021/jp411167g ↗
17. Low-temperature synthesis of BaTiO3 powders by the sol–gel-hydrothermal method10.1016/j.ceramint.2013.02.055 ↗
18. Monodisperse hollow perovskite BaTiO3 nanostructures prepared by a sol–gel–hydrothermal method10.1016/j.ceramint.2014.02.047 ↗
19. Fabrication of flower-like hydroxyapatite agglomerates with the assistant of bamboo membrane10.1016/j.matlet.2011.03.024 ↗
20. Morphology-controlled synthesis of barium titanate nanostructures10.1021/ic900854x ↗
21. Template-free fabrication of pure single-crystalline BaTiO3 nano-wires by molten salt synthesis technique10.1016/j.ceramint.2013.05.105 ↗
22. Surface poly PEGylation of Eu3+ doped luminescent hydroxyapatite nanorods through the combination of ligand exchange and metal free surface initiated atom transfer radical polymerization10.1016/j.apsusc.2016.12.107 ↗
23. Thermodynamic modeling of hydrothermal synthesis of ceramic powders10.1021/cm00025a014 ↗
24. Spectroscopic characterization of precursors used in the pechini-type polymerizable complex processing of barium titanate10.1021/cm9806681 ↗
25. Synthesis and characterization of nanoporous hydroxyapatite using cationic surfactants as templates10.1016/j.materresbull.2007.08.008 ↗
26. Kinetics and mechanisms of hydrothermal synthesis of barium titanate10.1111/j.1151-2916.1996.tb08728.x ↗
27. Effect of cationic surfactant micelles on hydroxyapatite nanocrystal formation: an investigation into the inorganic−organic interfacial interactions10.1021/acs.cgd.5b01599 ↗
28. Effect of electric charges on the growth process of micelles10.1006/jcis.1993.1187 ↗